Set disconnected flag in struct usbhid when a usb device is removed. Check for
disconnected flag before sending urb requests. This prevents a kernel panic
when a hid driver calls hid_hw_request() after removing a usb device.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290
 PGD 0
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 2 PID: 39 Comm: khubd Tainted: G          IO  3.16.0-rc5+ #112
 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013
 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000
 RIP: 0010:[<ffffffff8161746f>]  [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290
 RSP: 0018:ffff8800daf83750  EFLAGS: 00010086
 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000
 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000
 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8
 FS:  0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0
 Stack:
  ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000
  ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0
  ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013
 Call Trace:
  [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140
  [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370
  [<ffffffff81617b4a>] usbhid_request+0x1a/0x30
  [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub]
  [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger]
  [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger]
  [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio]
  [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio]
  [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio]
  [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d]
  [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80
  [<ffffffff814f41d1>] platform_device_del+0x21/0xc0
  [<ffffffff814f4282>] platform_device_unregister+0x12/0x30
  [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50
  [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70
  [<ffffffff81512105>] mfd_remove_devices+0x25/0x30
  [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub]
  [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81607d47>] hid_destroy_device+0x27/0x60
  [<ffffffff81616972>] usbhid_disconnect+0x22/0x50
  [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0
  [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0
  [<ffffffff814f1955>] device_release_driver+0x25/0x40
  [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0
  [<ffffffff814ed7d6>] device_del+0x136/0x1e0
  [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0
  [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0
  [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840
Signed-off-by: NReyad Attiyat <reyad.attiyat@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Ignore Jabra GN9350E HID interface. USB audio is working nicely, but
registering as HID blocks USB mouse buttons. Since special userspace programs
are needed we will avoid attaching usbhid drivers in general.
Signed-off-by: NPatrick Plattes <patrick@erdbeere.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device generates ABS_Z and ABS_RX events instead of ABS_X and
ABS_Y.
Signed-off-by: NWen-chien Jesse Sung <jesse.sung@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I am using a USB keyborad that give me "usb_submit_urb(ctrl) failed: -1" error
when I plugin it.  and I need to wait for 10s for this device to be ready.

By adding this quirks, the usb keyborad is usable right after plugin
Signed-off-by: NWangzhao Cai <microcaicai@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix checkpatch warning:
WARNING: debugfs_remove(NULL) is safe this check is probably not required
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch removes the cast on data of type void* as it is not needed.
The following Coccinelle semantic patch was used for making the change:

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is a UTF-8 non-breaking space character (0xc2 0xa0) after the "Y"
in "Say Y here". This is probably not intentional. Replace it with a
standard ASCII space (0x20).

If you can't see a difference here, I don't blame you :)
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The quirks_param array is located in the BSS, no need to explicitly
initialize it with NULL.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull HID patches from Jiri Kosina:
 - RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew
   Duggan and Jiri Kosina
 - cleanup of hid-sony driver and improved support for Sixaxis and
   Dualshock 4, by Frank Praznik
 - other usual small fixes and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
  HID: thingm: thingm_fwinfo[] doesn't need to be global
  HID: core: add two new usages for digitizer
  HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
  HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
  HID: hid-sensor-hub: Set report quirk for Microsoft Surface
  HID: debug: add labels for HID Sensor Usages
  HID: uhid: Use kmemdup instead of kmalloc + memcpy
  HID: rmi: do not handle touchscreens through hid-rmi
  HID: quirk for Saitek RAT7 and MMO7 mices' mode button
  HID: core: fix validation of report id 0
  HID: rmi: fix masks for x and w_x data
  HID: rmi: fix wrong struct field name
  HID: rmi: do not fetch more than 16 bytes in a query
  HID: rmi: check for the existence of some optional queries before reading query 12
  HID: i2c-hid: hid report descriptor retrieval changes
  HID: add missing hid usages
  HID: hid-sony - allow 3rd party INTEC controller to turn off all leds
  HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs
  HID: sony: Initialize the controller LEDs with a device ID value
  HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string
  ...

Pull trivial tree changes from Jiri Kosina:
 "Usual pile of patches from trivial tree that make the world go round"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  staging: go7007: remove reference to CONFIG_KMOD
  aic7xxx: Remove obsolete preprocessor define
  of: dma: doc fixes
  doc: fix incorrect formula to calculate CommitLimit value
  doc: Note need of bc in the kernel build from 3.10 onwards
  mm: Fix printk typo in dmapool.c
  modpost: Fix comment typo "Modules.symvers"
  Kconfig.debug: Grammar s/addition/additional/
  wimax: Spelling s/than/that/, wording s/destinatary/recipient/
  aic7xxx: Spelling s/termnation/termination/
  arm64: mm: Remove superfluous "the" in comment
  of: Spelling s/anonymouns/anonymous/
  dma: imx-sdma: Spelling s/determnine/determine/
  ath10k: Improve grammar in comments
  ath6kl: Spelling s/determnine/determine/
  of: Improve grammar for of_alias_get_id() documentation
  drm/exynos: Spelling s/contro/control/
  radio-bcm2048.c: fix wrong overflow check
  doc: printk-formats: do not mention casts for u64/s64
  doc: spelling error changes
  ...

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

Pull jfs changes from Dave Kleikamp.

* tag 'jfs-3.16' of git://github.com/kleikamp/linux-shaggy:
  fs/jfs/super.c: convert simple_str to kstr
  fs/jfs/jfs_dmap.c: replace min/casting by min_t
  fs/jfs/super.c: remove 0 assignment to static + code clean-up
  fs/jfs/jfs_logmgr.c: remove NULL assignment on static
  JFS: Check for NULL before calling posix_acl_equiv_mode()
  fs/jfs/jfs_inode.c: atomically set inode->i_flags

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next

Pull gfs2 updates from Steven Whitehouse:
 "This must be about the smallest merge window patch set ever for GFS2.
  It is probably also the first one without a single patch from me.
  That is down to a combination of factors, and I have some things in
  the works that are not quite ready yet, that I hope to put in next
  time around.

  Returning to what is here this time...  we have 3 patches which fix
  various warnings.  Two are bug fixes (for quotas and also a rare
  recovery race condition).  The final patch, from Ben Marzinski, is an
  important change in the freeze code which has been in progress for
  some time.  This removes the need to take and drop the transaction
  lock for every single transaction, when the only time it was used, was
  at file system freeze time.  Ben's patch integrates the freeze
  operation into the journal flush code as an alternative with lower
  overheads and also lands up resolving some difficult to fix races at
  the same time"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Prevent recovery before the local journal is set
  GFS2: fs/gfs2/file.c: kernel-doc warning fixes
  GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
  GFS2: remove transaction glock
  GFS2: lops.c: replace 0 by NULL for pointers
  GFS2: quotas not being refreshed in gfs2_adjust_quota

Pull file locking changes from Jeff Layton:
 "Pretty quiet on the file-locking related front this cycle.  Just some
  small cleanups and the addition of some tracepoints in the lease
  handling code"

* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
  locks: add some tracepoints in the lease handling code
  fs/locks.c: replace seq_printf by seq_puts
  locks: ensure that fl_owner is always initialized properly in flock and lease codepaths

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next

Pull firewire updates from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA
  controllers, one fix, one kconfig brushup"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
  firewire: Use COMPILE_TEST for build testing
  firewire: net: fix NULL derefencing in fwnet_probe()

The newly merged versatile sched clock support uses a deprecated
interface.  Of course that patch got routed through the ARM tree instead
of going through the relevant maintainer tree.

Use the proper interface so we can get rid of the cruft.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' and 'for-3.16/thingm' into for-linus

Conflicts:
	drivers/hid/hid-sensor-hub.c

Pull x86/UV changes from Ingo Molnar:
 "Continued updates for SGI UV 3 hardware support"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Fix conditional in gru_exit()
  x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3

Pull x86 RAS changes from Ingo Molnar:
 "Improve mcheck device initialization and bootstrap robustness"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mce: Panic when a core has reached a timeout
  x86/mce: Improve mcheck_init_device() error handling

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 IOSF platform updates from Ingo Molnar:
 "IOSF (Intel OnChip System Fabric) updates:

   - generalize the IOSF interface to allow mixed mode drivers: non-IOSF
     drivers to utilize of IOSF features on IOSF platforms.

   - add 'Quark X1000' IOSF/MBI support

   - clean up BayTrail and Quark PCI ID enumeration"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, iosf: Add PCI ID macros for better readability
  x86, iosf: Add Quark X1000 PCI ID
  x86, iosf: Added Quark MBI identifiers
  x86, iosf: Make IOSF driver modular and usable by more drivers

Pull x86 mm update from Ingo Molnar:

 - speed up 256 GB PCI BAR ioremap()s

 - speed up PTE swapout page reclaim case

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ioremap: Speed up check for RAM pages
  x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 microcode changes from Ingo Molnar:
 "A microcode-debugging boot flag plus related refactoring"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Add a disable chicken bit
  x86, boot: Carve out early cmdline parsing function

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 irq cleanup from Ingo Molnar:
 "A single, trivial cleanup"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Clean up VECTOR_UNDEFINED and VECTOR_RETRIGGERED definition

Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 build cleanups from Ingo Molnar:
 "Two small build related cleanups"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Supress realmode.bin is up to date message
  compiler-intel.h: Remove duplicate definition

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 boot changes from Ingo Molnar:
 "Two small cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Remove misc.h inclusion from compressed/string.c
  x86, boot: Do not include boot.h in string.c

Pull x86 asm cleanups from Ingo Molnar:
 "A handful of entry_64.S cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64, entry: Merge paranoidzeroentry_ist into idtentry
  x86_64, entry: Merge most 64-bit asm entry macros
  x86_64, entry: Add missing 'DEFAULT_FRAME 0' entry annotations

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull scheduler updates from Ingo Molnar:
 "The main scheduling related changes in this cycle were:

   - various sched/numa updates, for better performance

   - tree wide cleanup of open coded nice levels

   - nohz fix related to rq->nr_running use

   - cpuidle changes and continued consolidation to improve the
     kernel/sched/idle.c high level idle scheduling logic.  As part of
     this effort I pulled cpuidle driver changes from Rafael as well.

   - standardized idle polling amongst architectures

   - continued work on preparing better power/energy aware scheduling

   - sched/rt updates

   - misc fixlets and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sched/numa: Decay ->wakee_flips instead of zeroing
  sched/numa: Update migrate_improves/degrades_locality()
  sched/numa: Allow task switch if load imbalance improves
  sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
  sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
  sched: Initialize rq->age_stamp on processor start
  sched, nohz: Change rq->nr_running to always use wrappers
  sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
  sched: Use clamp() and clamp_val() to make sys_nice() more readable
  sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
  sched/numa: Fix initialization of sched_domain_topology for NUMA
  sched: Call select_idle_sibling() when not affine_sd
  sched: Simplify return logic in sched_read_attr()
  sched: Simplify return logic in sched_copy_attr()
  sched: Fix exec_start/task_hot on migrated tasks
  arm64: Remove TIF_POLLING_NRFLAG
  metag: Remove TIF_POLLING_NRFLAG
  sched/idle: Make cpuidle_idle_call() void
  sched/idle: Reflow cpuidle_idle_call()
  sched/idle: Delay clearing the polling bit
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull perf updates from Ingo Molnar:
 "The tooling changes maintained by Jiri Olsa until Arnaldo is on
  vacation:

  User visible changes:
   - Add -F option for specifying output fields (Namhyung Kim)
   - Propagate exit status of a command line workload for record command
     (Namhyung Kim)
   - Use tid for finding thread (Namhyung Kim)
   - Clarify the output of perf sched map plus small sched command
     fixes (Dongsheng Yang)
   - Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
   - Factor hists statistics counts processing which in turn also fixes
     several bugs in TUI report command (Namhyung Kim)
   - Add --percentage option to control absolute/relative percentage
     output (Namhyung Kim)
   - Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by
     completion scripts (Ramkumar Ramachandra)

  Development/infrastructure changes and fixes:
   - Android related fixes for pager and map dso resolving (Michael
     Lentine)
   - Add libdw DWARF post unwind support for ARM (Jean Pihet)
   - Consolidate types.h for ARM and ARM64 (Jean Pihet)
   - Fix possible null pointer dereference in session.c (Masanari Iida)
   - Cleanup, remove unused variables in map_switch_event() (Dongsheng
     Yang)
   - Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)
   - Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
   - Cleanups for perf.h header (Jiri Olsa)
   - Consolidate types.h and export.h within tools (Borislav Petkov)
   - Move u64_swap union to its single user's header, evsel.h (Borislav
     Petkov)
   - Fix for s390 to properly parse tracepoints plus test code
     (Alexander Yarygin)
   - Handle EINTR error for readn/writen (Namhyung Kim)
   - Add a test case for hists filtering (Namhyung Kim)
   - Share map_groups among threads of the same group (Arnaldo Carvalho
     de Melo, Jiri Olsa)
   - Making some code (cpu node map and report parse callchain callback)
     global to be usable by upcomming changes (Don Zickus)
   - Fix pmu object compilation error (Jiri Olsa)

  Kernel side changes:
   - intrusive uprobes fixes from Oleg Nesterov.  Since the interface is
     admin-only, and the bug only affects user-space ("any probed
     jmp/call can kill the application"), we queued these fixes via the
     development tree, as a special exception.
   - more fuzzer motivated race fixes and related refactoring and
     robustization.
   - allow PMU drivers to be built as modules.  (No actual module yet,
     because the x86 Intel uncore module wasn't ready in time for this)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  perf tools: Add automatic remapping of Android libraries
  perf tools: Add cat as fallback pager
  perf tests: Add a testcase for histogram output sorting
  perf tests: Factor out print_hists_*()
  perf tools: Introduce reset_output_field()
  perf tools: Get rid of obsolete hist_entry__sort_list
  perf hists: Reset width of output fields with header length
  perf tools: Skip elided sort entries
  perf top: Add --fields option to specify output fields
  perf report/tui: Fix a bug when --fields/sort is given
  perf tools: Add ->sort() member to struct sort_entry
  perf report: Add -F option to specify output fields
  perf tools: Call perf_hpp__init() before setting up GUI browsers
  perf tools: Consolidate management of default sort orders
  perf tools: Allow hpp fields to be sort keys
  perf ui: Get rid of callback from __hpp__fmt()
  perf tools: Consolidate output field handling to hpp format routines
  perf tools: Use hpp formats to sort final output
  perf tools: Support event grouping in hpp ->sort()
  perf tools: Use hpp formats to sort hist entries
  ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull RCU changes from Ingo Molnar:
 "The main RCU changes in this cycle were:

   - RCU torture-test changes.

   - variable-name renaming cleanup.

   - update RCU documentation.

   - miscellaneous fixes.

   - patch to suppress RCU stall warnings while sysrq requests are being
     processed"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  rcu: Provide API to suppress stall warnings while sysrc runs
  rcu: Variable name changed in tree_plugin.h and used in tree.c
  torture: Remove unused definition
  torture: Remove __init from torture_init_begin/end
  torture: Check for multiple concurrent torture tests
  locktorture: Remove reference to nonexistent Kconfig parameter
  rcutorture: Run rcu_torture_writer at normal priority
  rcutorture: Note diffs from git commits
  rcutorture: Add missing destroy_timer_on_stack()
  rcutorture: Explicitly test synchronous grace-period primitives
  rcutorture:  Add tests for get_state_synchronize_rcu()
  rcutorture: Test RCU-sched primitives in TREE_PREEMPT_RCU kernels
  torture: Use elapsed time to detect hangs
  rcutorture: Check for rcu_torture_fqs creation errors
  torture: Better summary diagnostics for build failures
  torture: Notice if an all-zero cpumask is passed inside a critical section
  rcutorture: Make rcu_torture_reader() use cond_resched()
  sched,rcu: Make cond_resched() report RCU quiescent states
  percpu: Fix raw_cpu_inc_return()
  rcutorture: Export RCU grace-period kthread wait state to rcutorture
  ...

This patch replaces obsolete simple_str functions by kstr

use kstrtouint for
-uid_t ( __kernel_uid32_t )
-gid_t ( __kernel_gid32_t )
-jfs_sb_info->umask
-jfs_sb_info->minblks_trim
(all unsigned int)

newLVSize is s64 -> use kstrtol

Current parse_options behaviour stays the same ie it doesn't return kstr
rc but just 0 if function failed (parse_options callsites
return -EINVAL when there's anything wrong).
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>

-Static values are automatically initialized to NULL
-Coalesce format fragments
-Remove unnecessary {}
-Small typo fixes
-Fix lines > 80 characters
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>

Static values are automatically initialized to NULL
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "A few fixes for dma-mapping and CMA subsystems"

* 'for-v3.16' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  CMA: correct unlock target
  drivers/base/dma-contiguous.c: erratum of dev_get_cma_area
  arm: dma-mapping: add checking cma area initialized
  arm: dma-iommu: Clean up redundant variable
  cma: Remove potential deadlock situation

Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...

Pull spi updates from Mark Brown:
 "For this release SPI has been exceptionally quiet, all the work has
  been on improving drivers (including taking advantage of some of the
  recent framework updates):

   - DMA support for the rspi driver providing a nice performance boost
   - performance improvement for the SIRF controller in PIO mode
   - new support for the Cadence SPI IP and for pxa2xx on BayTrail"

* tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
  spi: rspi: Extract rspi_common_transfer()
  spi: rspi: Add DMA support for RSPI on RZ/A1H
  spi: rspi: Add DMA support for QSPI on R-Car Gen2
  spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()
  spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()
  spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()
  spi: rspi: Move RSPI-specific setup out of DMA routines
  spi: rspi: Use SPI core DMA mapping framework
  spi: rspi: SPI DMA core needs both RX and TX DMA to function
  spi: rspi: Remove unneeded resource test in DMA setup
  spi: rspi: Extract rspi_request_dma_chan()
  spi: rspi: Don't consider DMA configuration failures fatal
  spi: rspi: Extract rspi_pio_transfer()
  spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling
  spi: rspi: Remove unused 16-bit DMA support
  spi: rspi: Do not call rspi_receive_init() for TX-only
  spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()
  spi/pxa2xx: fix runtime PM enabling order
  spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans()
  spi: core: Ignore unsupported spi-[tr]x-bus-width property values
  ...

Pull regmap updates from Mark Brown:
 "Another fairly quiet release, a few bug fixes and a couple of new
  features:

   - support for I2C devices connected to SMBus rather than full I2C
     controllers contributed by Boris Brezillon.  If the controller is
     only capable of SMBus operation the framework will transparently
     fall back to that

   - suport for little endian values, contributed by Xiubo Li"

* tag 'regmap-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: mmio: Fix regmap_mmio_write for uneven counts
  regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: Add missing initialization of this_page
  regmap: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: i2c: fallback to SMBus if the adapter does not support standard I2C
  regmap: add reg_read/reg_write callbacks to regmap_bus struct
  regmap: rbtree: improve 64bits memory alignment
  regmap: mmio: Fix the bug of 'offset' value parsing.
  regmap: implement LE formatting/parsing for 16/32-bit values.

Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...