This is not valid (in the spec) and mac80211 will soon
warn on it, in addition to ignoring it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.d568df20e273.Id45ae38f9b16b3c56fa62266e3e89a1421ea07b0@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Identify and print out the RF module to be able to identify
(from logs and through debugfs) which one (and version) is
present on the system.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.cd1ef97b2c04.Iad42a59902a87a50b45b9ce88705863686a83b54@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Region TLV version 2 now includes more data, but it is not
relevant for the driver.
In order to support this new version, just mask the new part out.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.60dd4c60ab49.I44fe02af389d3ab089363bf9bde0d99a4c1ff383@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This configuration struct is declared twice, remove one of the
declarations.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.a08c905ec25b.Iff706f9d5b7b666e306549c419d04dcd4d81e5fd@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This is duplicated with CSR_HW_RFID_TYPE so just use the latter
for less typing/shorter lines.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.00b220f4ba53.I1fe216a46e7d9c1316d681daa293064f16ff1899@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Printing the interrupt index in our local array isn't very
useful in an error message, print the interrupt number (as
also shown in e.g. /proc/interrupts) instead.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.05bc5157e606.Ifb65b5ed2e5296fd8258c40c4287b5443b06d337@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add support for AX231 radio modules, which we call Fm.
These modules can be used with the Ma family of devices
and above.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.c1fdd153d686.I7ee0485c52fb429de1fe171cb6dc0ae593a26788@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The FW has a watchdog of 200ms in the PNVM load flow, so the driver
should have a slightly higher timeout.  Change the timeout from 100ms
to 250ms.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Fixes: 70d3ca86 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.ba22aec1e2be.I36bfadc28c480f4fc57266c075a79e8ea4a6934f@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

pcim_iomap_table() might return NULL, so we shouldn't unconditionally
dereference the return value by taking the [0] entry.

Handle this better by checking for NULL first, and then separately
checking if the [0] entry is NULL.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.9aa4f0e3574a.I458b283f203d5f927f00be1bfbd4b8ebf11c5ae4@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't use this command anymore and it is going to be removed from
the FW.  Remove all related definitions.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.549b282ae9a4.Iced05882d73b869e19f50e6a6e7bf9ce6cd7899b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Two functions had indentation mistakes which were causing sparse
warnings.  Fix them.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.12f3b9fea57e.I42a7556d43de78ec6387e3a699eca10482b0485d@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Allow the caller to pass the clock type to iwl_mvm_get_sync_time() so
callers with different needs can decide whether to use boottime or
realtime.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.093f6660e69b.Ifd2328ac2130269f729c9c1bceec44ba01d79e88@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Read the new BIOS DSM and Pass to FW if to disable\enable
11ax for Russia according to the BIOS key. This is
needed to enable OEMs to control enable/disable 11ax in Russia.
Also add support for future "enable 11ax in country X" features.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.a705f7cedff8.I580f1021cabcc37e88f5ec5e9a6bbf00aae514b6@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

One USB data buffer can contain multiple received network
packets. If that's the case, they're processed this way:
1. Original buffer is cloned
2. Original buffer is trimmed to contain only the first
   network packet
3. This first network packet is passed to network stack
4. Cloned buffer is trimmed to eliminate the first network
   packet
5. Repeat with the cloned buffer until there are no more
   network packets inside

However, if the space remaining in original buffer after
the first network packet is not enough to contain at least
another network packet descriptor, it is not cloned.

The loop parsing this packets ended if remaining space == 0.
But if the remaining space was > 0 but < packet descriptor
size, another iteration of the loop was done, processing again
the previous packet because cloning didn't happen. Moreover,
the ownership of this packet had been passed to network
stack in the previous iteration.

This patch ensures that no extra iteration is done if the
remaining size is not enough for one packet, and also avoid
the first iteration for the same reason.

Probably this doesn't happen in practice, but can happen
theoretically.
Signed-off-by: NÍñigo Huguet <ihuguet@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511071926.8951-1-ihuguet@redhat.com

Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.
Signed-off-by: NPascal Terjan <pterjan@google.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com

mt76 patches for 5.14

* mt7915 MSI support
* disable ASPM on mt7915
* mt7915 tx status reporting
* mt7921 decap offload
* driver fixes
* cleanups
* mt7921 runtime power management improvements
* testmode improvements/fixes
* runtime PM improvements

Disable chip full reset just during device probing but allow
it during hw restart.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Set macwork timeout value according to runtime-pm in order to reduce
power consumption
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Allow the user to enable runtime-pm for mt7663s driver
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Similar to mt7663e, rely on mt76_connac_pm_ref/mt76_connac_pm_unref to
check PM state and increment/decrement wake counter
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

As already done for mt7921 and mt7663e, rely on pm reference counting in
drv/fw_own
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

In order to support runtime-pm for sdio, do not run mt76_txq_schedule
directly, but schedule tx_worker instead
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Enables HE MU/SU beamformee functionality
Signed-off-by: NEric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: NDeren Wu <deren.wu@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Disable TWT REQ/RES mac capabilities since TWT is not supported
yet in mt7915/mt7921.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a
check for CCMP header insertion. Move mt76_cipher_type to mt76.h to
reduce duplicated code.
Signed-off-by: NXing Song <xing.song@mediatek.com>
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix the maximum size of the coredump generated with current mt7921
firmware. Otherwise, a truncated coredump would be reported to userland
via dev_coredumpv.

Also, there is an additional error handling enhanced in the patch to avoid
the possible invalid buffer access when the system failed to create the
buffer to hold the coredump.

Fixes: 0da3c795 ("mt76: mt7921: add coredump support")
Co-developed-by: NYN Chen <YN.Chen@mediatek.com>
Signed-off-by: NYN Chen <YN.Chen@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

ieee80211_disconnect is only called for the staton mode.

[  714.050429] WARNING: CPU: 1 PID: 382 at net/mac80211/mlme.c:2787
ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.116704] Hardware name: MediaTek Asurada rev1 board (DT)
[  714.122303] Workqueue: mt76 mt7921_mac_reset_work [mt7921e]
[  714.127877] pstate: 20c00009 (nzCv daif +PAN +UAO)
[  714.132761] pc : ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.138430] lr : mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.144083] sp : ffffffc0107cbbd0
[  714.147394] x29: ffffffc0107cbbd0 x28: ffffffb26c9cb928
[  714.152706] x27: ffffffb26c9cbd98 x26: 0000000000000000
[  714.158017] x25: 0000000000000003 x24: ffffffb26c9c9c38
[  714.163328] x23: ffffffb26c9c9c38 x22: ffffffb26c9c8860
[  714.168639] x21: ffffffb23b940000 x20: ffffffb26c9c8860
[  714.173950] x19: 0000000000000001 x18: 000000000000b67e
[  714.179261] x17: 00000000064dd409 x16: ffffffd739cb28f0
[  714.184571] x15: 0000000000000000 x14: 0000000000000227
[  714.189881] x13: 0000000000000400 x12: ffffffd73a4eb060
[  714.195191] x11: 0000000000000000 x10: 0000000000000000
[  714.200502] x9 : ffffffd703a0a000 x8 : 0000000000000006
[  714.205812] x7 : 2828282828282828 x6 : ffffffb200440396
[  714.211122] x5 : 0000000000000000 x4 : 0000000000000004
[  714.216432] x3 : 0000000000000000 x2 : ffffffb23b940c90
[  714.221743] x1 : 0000000000000001 x0 : ffffffb23b940c90
[  714.227054] Call trace:
[  714.229594]  ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.234913]  mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.240313]  __iterate_interfaces+0xc4/0xdc [mac80211]
[  714.245541]  ieee80211_iterate_interfaces+0x4c/0x68 [mac80211]
[  714.251381]  mt7921_mac_reset_work+0x410/0x468 [mt7921e]
[  714.256696]  process_one_work+0x208/0x3c8
[  714.260706]  worker_thread+0x23c/0x3e8
[  714.264456]  kthread+0x140/0x17c
[  714.267685]  ret_from_fork+0x10/0x18

Fixes: 0c1ce988 ("mt76: mt7921: add wifi reset support")
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce ds_enable switch to fully control fw deep_sleep capability
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Limit tx power for single-sku according to userlevel power.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt7921_update_txs routine in order to improve code readability
for tx timestamp parsing/configuration.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add addtional the deep sleep control to runtime-pm knob to
allow us to control driver switching between the full power
mode and the deep sleep mode the firmware is able to support.
Reviewed-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Enable the deep sleep mode with that firmware is able to trap into
the doze state at runtime to reduce the power consumption further.

The deep sleep mode is not allowed in the STA state transition with
the firmware to have the fast connection experience as we've done in
the full power mode
Reviewed-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The value of station mode is always 0.

Fixed: 00b2e16e ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

header files should use '/* SPDX ... */
Change from c file comment syle to header style
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

checkpatch expects a space between '#' and 'SPDX...'
Add a space.
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

- Adjust starec flow since VHT MU group is only updated by starec_vht
  follows starec_bf settings.
- Drop unnecessary MU BF checks.

TX MPDU PER (Status = Success):
                                           TOT_MPDU_CNT  FAIL_MPDU_CNT  TX_PER
WCID Rate
1      VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF              114              0   0.00%
       VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU            64              0   0.00%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF              128              0   0.00%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU           745              0   0.00%
       VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU           856              0   0.00%
       VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU          1430              4   0.28%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU          5220             31   0.59%
       VHT_BW80_2SS_MCS9_LGI_LDPC_iBF                59              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF               64              2   3.12%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU         22132             76   0.34%
       VHT_BW80_2SS_MCS9_SGI_LDPC_iBF              2866              1   0.03%
2      VHT_BW80_2SS_MCS7_LGI_LDPC_MUBF_MU          3781              5   0.13%
       VHT_BW80_2SS_MCS7_SGI_LDPC_MUBF_MU           735              0   0.00%
       VHT_BW80_2SS_MCS8_LGI_LDPC_MUBF_MU          1270            365  28.74%
       VHT_BW80_2SS_MCS8_SGI_LDPC_MUBF_MU          3420             57   1.67%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF              128              0   0.00%
       VHT_BW80_2SS_MCS9_LGI_LDPC_MUBF_MU            64              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF              191              0   0.00%
       VHT_BW80_2SS_MCS9_SGI_LDPC_MUBF_MU         18833            320   1.70%
       VHT_BW80_2SS_MCS9_SGI_LDPC_iBF              6040              0   0.00%
287    OFDM 6M
Tested-by: NEvelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Use mt7915_mcu_set_txbf() to reduce global functions. This can be
easily extended to support other TxBF commands in further patches.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Reduce duplicated survey for DBDC.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

There are firmware or hardware issues, which are currently causing tx hangs
when attempting to use these interfaces
Signed-off-by: NFelix Fietkau <nbd@nbd.name>