When changing the audio hw params, reset the audio fifo to make sure
any old remaining data is flushed.

The databook mentions that such reset should be followed by a reset of
the i2s block to make sure the samples stay aligned
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-7-jbrunet@baylibre.com

setup the channel allocation provided by the generic hdmi-codec driver
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-6-jbrunet@baylibre.com

Properly setup the channel count and layout in dw-hdmi i2s driver so
we are not limited to 2 channels.

Also correct the maximum channel reported by the DAI from 6 to 8 ch
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-5-jbrunet@baylibre.com

Set the number of channel in the infoframes
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-4-jbrunet@baylibre.com

Part of the channel count setup done in dw-hdmi ahb should
actually be done whatever the interface providing the data.

Let's move it to dw-hdmi driver instead.
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-3-jbrunet@baylibre.com

The dw-hdmi-i2s supports more formats than just regular i2s.
Add support for left justified, right justified and dsp modes
A and B.
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812120726.1528-2-jbrunet@baylibre.com

The amlogic,meson-dw-hdmi.txt and amlogic,meson-vpu.txt has been
converted to YAML schemas, update MAINTAINERS to match them again.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NMaxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-4-narmstrong@baylibre.com

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Display Controller over to YAML schemas.

The original example has a leftover "dmc" memory cell, that has been
removed in the yaml rewrite.

The port connection table has been dropped in favor of a description
of each port.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-3-narmstrong@baylibre.com

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.

The original example and usage of clock-names uses a reversed "isfr"
and "iahb" clock-names, the rewritten YAML bindings uses the reversed
instead of fixing the device trees order.

The #sound-dai-cells optional property has been added to match this node
as a sound dai.

The port connection table has been dropped in favor of a description
of each port.
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-2-narmstrong@baylibre.com

Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/

The only remaining use for this is to protect against setting a new exclusive
fence while we grab both exclusive and shared. That can also be archived by
looking if the exclusive fence has changed or not after completing the
operation.

v2: switch setting excl fence to rcu_assign_pointer
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322380/

During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.

In particular, we get struck by commit 0e2f733a ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.

v2: Avoid calling into timeline_fence_release() from under the spinlock

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44 ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733a ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk

Increment the driver version to expose the new BO allocation flags.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-10-robh@kernel.org

The midgard/bifrost GPUs need to allocate GPU heap memory which is
allocated on GPU page faults and not pinned in memory. The vendor driver
calls this functionality GROW_ON_GPF.

This implementation assumes that BOs allocated with the
PANFROST_BO_NOEXEC flag are never mmapped or exported. Both of those may
actually work, but I'm unsure if there's some interaction there. It
would cause the whole object to be pinned in memory which would defeat
the point of this.

On faults, we map in 2MB at a time in order to utilize huge pages (if
enabled). Currently, once we've mapped pages in, they are only unmapped
if the BO is freed. Once we add shrinker support, we can unmap pages
with the shrinker.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-9-robh@kernel.org

In preparation to handle mapping of page faults, we need the MMU handler
to be threaded as code paths take a mutex.

As the IRQ may be shared, we can't use the default handler and must
disable the MMU interrupts locally.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-8-robh@kernel.org

Runtime PM resume and job timeouts both call the same sequence of
functions, so consolidate them to a common function. This will make
changing the reset related code easier. The MMU also needs some
re-initialization on reset, so rework its call. In the process, we
hide the address space details within the MMU code in preparation to
support multiple address spaces.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-7-robh@kernel.org

Executable buffers have an alignment restriction that they can't cross
16MB boundary as the GPU program counter is 24-bits. This restriction is
currently not handled and we just get lucky. As current userspace
assumes all BOs are executable, that has to remain the default. So add a
new PANFROST_BO_NOEXEC flag to allow userspace to indicate which BOs are
not executable.

There is also a restriction that executable buffers cannot start or end
on a 4GB boundary. This is mostly avoided as there is only 4GB of space
currently and the beginning is already blocked out for NULL ptr
detection. Add support to handle this restriction fully regardless of
the current constraints.

For existing userspace, all created BOs remain executable, but the GPU
VA alignment will be increased to the size of the BO. This shouldn't
matter as there is plenty of GPU VA space.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-6-robh@kernel.org

In preparation to create partial GPU mappings of BOs on page faults,
split out the SG list handling of panfrost_mmu_map().

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed: Steven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-5-robh@kernel.org

Setting the GPU VA when creating the GEM object doesn't allow for any
conditional adjustments to the mapping. In preparation to support
adjusting the mapping and per FD address spaces, restructure the GEM
object creation to map and unmap the GEM object in the GEM object .open()
and .close() hooks.

While panfrost_gem_free_object() and panfrost_gem_prime_import_sg_table()
are not really needed after this commit, keep them as we'll need them in
subsequent commits.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-4-robh@kernel.org

If a driver does its own management of pages, the shmem helper object's
pages array could be allocated when a SG table is not. There's not
really any  good reason to tie putting pages with having a SG table when
freeing the object, so just put pages if the pages array is populated.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-3-robh@kernel.org

Panfrost has a need for pages allocated on demand via GPU page faults.
When releasing the pages, the only thing preventing using
drm_gem_put_pages() is needing to skip over unpopulated pages, so allow
for skipping over NULL struct page pointers.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NSteven Price <steven.price@arm.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-2-robh@kernel.org

Add -ENODEV to the list of usb-transfer errors which we ignore to
avoid logging Frame update errors when the device gets unplugged.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-2-hdegoede@redhat.com

I made the condition of the wait_event_timeout call in
gm12u320_fb_update_work a helper which takes a mutex to make sure
that any writes to fb_update.run or fb_update.fb from other CPU cores
are seen before the check is done.

This is not necessary as the wait_event helpers contain the necessary
barriers for this themselves.

More over it is harmfull since by the time the check is done the task
is no longer in the TASK_RUNNING state and calling mutex_lock while not
in task-running is not allowed, leading to this warning when the kernel
is build with some extra locking checks enabled:

[11947.450011] do not call blocking ops when !TASK_RUNNING; state=2 set at
               [<00000000e4306de6>] prepare_to_wait_event+0x61/0x190

This commit fixes this by dropping the helper and simply directly
checking the condition (without unnecessary locking) in the
wait_event_timeout call.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-1-hdegoede@redhat.com

Previously the driver was using a mix of DRM_ERROR and dev_err, be
consisent and use DRM_DEV_ERROR everywhere instead.

Cc: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730133857.30778-2-hdegoede@redhat.com

3 small cleanups:

1) Drop unused DRIVER_PATCHLEVEL
2) We do not set mode_config.preferred_depth, so instead of passing the
   unset mode_config.preferred_depth to drm_fbdev_generic_setup
   simply pass 0
3) Use __maybe_unused instead of #ifdef CONFIG_PM around the suspend /
   resume functions

Cc: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: NSam Ravnborg <sam@ravnborg.org>
Suggested-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730133857.30778-1-hdegoede@redhat.com

This patch only brings the syncobj documentation up-to-date for the
original form of syncobj.  It does not contain any information about the
design of timeline syncobjs.

v2: Incorporate feedback from Lionel and Christian:
 - Mention actual ioctl and flag names
 - Better language around reference counting
 - Misc. language cleanups
Signed-off-by: NJason Ekstrand <jason@jlekstrand.net>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812142211.15885-1-jason@jlekstrand.net

Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation.
../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.
../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string.

Changes in v2:
- Use () instead of & for functions (Sam)

Fixes: 1b27fbdd ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers")
Fixes: bb5a45d4 ("drm/hdcp: update content protection property with uevent")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run

Add suffix ULL to constant 1000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is being used in a context
that expects an expression of type u64, but it's currently evaluated
using 32-bit arithmetic.

Addresses-Coverity-ID: 1485796 ("Unintentional integer overflow")
Fixes: ed22c6d9 ("drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Njames qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812000801.GA29204@embeddedor

Same as for the individual fences, we want to report the actual status
of the fence when queried.
Reported-by: NPetri Latvala <petri.latvala@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812091203.29871-1-chris@chris-wilson.co.uk

Orange Pi 3 board requires enabling a voltage shifting circuit via GPIO
for the DDC bus to be usable.

Add support for hdmi-connector node's optional ddc-en-gpios property to
support this use case.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-4-megous@megous.com

Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
on-board voltage shifting logic for the DDC bus using a gpio to be able
to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to
model this.

Add binding documentation for optional ddc-en-gpios property.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMaxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-3-megous@megous.com

When one of the array of fences is signaled, propagate its errors to the
parent fence-array (keeping the first error to be raised).

v2: Opencode cmpxchg_local to avoid compiler freakout.
v3: Be careful not to flag an error if we race against signal-on-any.
v4: Same applies to installing the signal cb.
v5: Use cmpxchg to only set the error once before using a nifty idea by
Christian to avoid changing the status after emitting the signal.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210902.22112-1-chris@chris-wilson.co.uk

There are no errors that can be reported by this function,
so drop the return code.
Fix the only bridge driver that checked the return result.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org

Inline comments provide better space for additional comments.
Comments was slightly edited to follow the normal style,
but no change to actual content.
Used the opportuniy to change the order in drm_panel_funcs
to follow the order they will be used by a panel.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-13-sam@ravnborg.org

Move inline functions from include/drm/drm_panel.h to drm_panel.c.
This is in preparation for follow-up patches that will add extra
logic to the functions.
As they are no longer static inline, EXPORT them.

v2:
- align order of functions in drm_panel.h and drm_panel.c (Laurent)
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-12-sam@ravnborg.org

To prepare the driver to receive drm_connector only in the get_modes()
callback, move bus_flags handling to ili9322_get_modes().
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-11-sam@ravnborg.org

Use the drm_panel_get_modes() function.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Marek Vasut <marex@denx.de>
Acked-by: NStefan Agner <stefan@agner.ch>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-8-sam@ravnborg.org

Use drm_panel_get_modes() to access modes.
This has a nice side effect to simplify the code.

drm_panel_get_modes() may return a negative value if
for example panel is NULL. This is a small change
compared to before, but really what we want.

v2:
- Add more info to changelog (Stefan)
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NStefan Agner <stefan@agner.ch>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Alison Wang <alison.wang@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-6-sam@ravnborg.org

Use the drm_panel_get_modes() function to get the modes.

This patch leave one test for the function pointer:
    panel->funcs->get_modes

This is used to check if the panel may have any modes.
There is no direct replacement.
We may be able to just check that drm_panel_get_modes() return > 0,
but as this is not the same functionality it is left for later.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-5-sam@ravnborg.org

Replace open coded version with call to drm_panel_get_modes().

Include change to deal with the possible negative
return values from drm_panel_get_modes()

v2:
- Added more info to changelog (Philipp)
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-2-sam@ravnborg.org