be less silly while we're there.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In commit e6bafba5, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.

This is not tested and clearly changes the semantics, so it is only
something to consider.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E1,E2; @@
(
  !E1 & !E2
|
- !E1 & E2
+ !(E1 & E2)
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx driver is capable of handling more than one usb device. However, isoc
transfers require a large amount of data to be transfered.

Before this patch, just one em28xx board were enough to allocate more than 50%
URBs:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=480/800 us (60%), #Int=  0, #Iso=  2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1

So, only one board could use an USB host at the same time. After the patch, it
is possible to use more than one em28xx at the same time, on the same usb host,
if the image size is slower or equal to 345600, since those images will
require about 30% of the URBs:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=232/800 us (29%), #Int=  0, #Iso=  2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1

So, in thesis, after the patch, it would be possible to use up to 3 boards by
each usb host, if the devices are generating small images.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Improves audio configurations on em28xx:
        - mutes audio before changing amux;
        - adds a delay after setting audio src;
        - waits up to 50ms for ac97 busy.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds vidioc_[g|s]_register handlers. This allows getting/setting register
from em28xx.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

AC97 register initialization seem to always be needed. This patch fixes audio
for Prolink/Pixelview USB2 board.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source':
drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function

This looks like a genuine bug to me.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Device description:
WinTV-HVR-900
M/R: 65018/B3C0 ##4207
Signed-off-by: NLuc Saillard <luc@saillard.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch makes the following needlessly global functions static:
- em28xx-core.c:em28xx_write_reg_bits()
- em28xx-video.c:em28xx_vdev_init()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

sound/driver.h is already included by sound/core.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Without this you get undefined symbol errors with CONFIG_SND=N:

  ERROR: "snd_pcm_period_elapsed" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_set_ops" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_lib_ioctl" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_free" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_register" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
Signed-off-by: NS.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT
means the same thing.

Having two ways to say that a tuner is not present is
not nice, since it may lead to bad setups. In fact, with the previous
code, if a device were using has_tuner=0, but the user forces a tuner,
with modprobe option tuner=type, the modprobe option won't work.

Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent.
So, with the previous logic, in this case, the driver should set
has_tuner=0, or has_tuner=1 otherwise.

Instead of adding several additional tests and setups, better just to
remove .has_tuner.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This cleanup moves the board-specific configurations to em28xx-cards.c.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Jeroen Janssen <Jeroen.Janssen@vub.ac.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Before this patch, only Vendor Class audio support were loaded. This means that
older em28xx devices won't have digital audio support loaded.

This patch changes the logic to auto load eighter snd-usb-audio, for devices
with USB Audio Class or em28xx-alsa, for devices with USB Vendor Class.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Only HVR950 has analog_gpio configured. It makes no sense to set gpio to 0 for
other boards. Better to add a test, while this var is not set for all xc3028
devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Older em28xx devices does implement standard Audio Class.

However, on newer devices, this were replaced by a Vendor Class. This
patch autodetects that an em28xx lacks Audio Class and auto-loads
em28xx-alsa, for the devices that implements only a Vendor Class.

For devices with Audio Class, snd-usb-audio module will provide an ALSA
interface.

This patch uses the request_module_async function as defined on cx88-mpeg.c, 
originally wrote by Markus Rechberger.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Also fixes the remaining CodingStyle issues that Lindent didn't fix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

em28xx-audio module exports em28xx Vendor Class audio as an -alsa
driver. This module were written based on usbaudio driver by Markus
Rechberger. Recently, he acked to allow us to merge it on kernel:

http://lists-archives.org/video4linux/20408-supporting-prolink-pixelview-405-dvd-maker.html

Thanks to Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those
commands.

Also, MTS firmware is required for audio to work on HVR950.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It is possible to select audio inputs via em28xx or via ac97 functions.
This patch allows configuring a board to use either one way.

It also do some cleanups at audio setup configurations.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The patch below adds the "Pinnacle Dazzle DVC 100" to the list of
cards supported by the em28xx driver. As the configuration is the same
as the DVC 90 one, it simply adds a new USB ID to the list of devices
supported by the DVC 90 configuration.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

thanks to checkpatch.pl
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Xc2028.3028 has two type of firmwares: audio-standard specific ones and
baseband MTS firmwares. MTS firmwares provide stereo decoding for 6 MHz
BTSC/EIAJ and for monoaural audio decoding on 8 MHz firmwares.

It seems that the option to use MTS or a standard-specific audio decoding
depends on the way xc2028/3028 is connected.

Instead of wasting 32 (or 64 bits) to signalize if the driver needs to use MTS
firmware, this patch converts it to a bitfield that can be shared with other
proprieties of xc2028/3028.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The HVR-900 requires the MTS version of the xc3028 firmware in order
to get any sound. The below patch selects this firmware variant on
HVR-900 cards, as well as splitting the HVR-950 into its own entry
(since I don't know if it uses the MTS variant and it will have to be
split off eventually anyway).
Signed-off-by: NAidan Thornton <makosoft@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

With the conversion to the vidio_ioctl2, tvnorms array is not required anymore.

Also, removed some code from V4L1 time (VIDEO_MODE_foo), specied at the
non-used video_decoder.h.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There were some vestiges of an old V4L1 I2C driver that were called by em28xx.
This patch removes this dead code, and replaces videodev.h to videodev2.h

Now, this driver doesn't require V4L1 anymore.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Uses the newer ioctl handler at videodev. This patch also cleans up some
bad logic at the driver and do CodingStyle and other cleanups at the
resulting driver.

Also, since VIDIOCMBUF were not working, the V4L1 compat code were removed.
The compat code will eventually be re-inserted, if we find a clean way for
implementing compatibility with the old API.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Backport read() fixes from Markus Rechberger.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

On some situations, closing an streaming application and re-opening were
returning -EBUSY.

Uses the same locking schema also present on cx88.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Allows shared access support for em28xx. Just one userspace application is
allowed to get stream. The other(s) application(s) can change V4L2 controls,
set video standards, etc.

This patch were splited from Markus Rechberger's tree and backported to 2.6.17
by Pádraig Brady.

The original patch were ported to the latest em28xx version and had CodingStyle
corrected to solve the issues pointed by scripts/checkpatch.pl.

Thanks to Pádraig Brady <P@draigBrady.com> for pointing this.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Hauppauge firmwares can be decoded using tveeprom. This patch adds HVR-900 as
a tveeprom client. It also adds xc3028 tuner entry to tveeprom.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Tuner-type were correctly filled only by the hint function.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>