Add missing register definitions; mainly for colorspace conversion, video
timing and interrupt handling.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Rename the register to be aligned with the HDMI_CORE_SYS naming convention.
Also, update the naming of the #defines used for its fields.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add the spread spectrum clock configuration registers to the DPLL dump.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add missing register definitions for spread spectrum clocking.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add missing registers when dumping the HDMI wrapper. Also, order the dump by
offset to improve readability.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add definitions for missing registers in the HDMI wrapper. Also, order
the registers by offset to improve readability.
Signed-off-by: NRicardo Neri <ricardo.neri@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

get display timings from device tree
Use videomode helpers to get display timings and configurations from
device tree
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

so we can use have list gpio as example (probe via DT)
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

to simplify the check on the presence of the callback
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Today we mix pdata and drivers data in the struct atmel_lcdfb_info
Fix it and introduce a new struct atmel_lcdfb_pdata for platform data only
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

In preparation to switching the jz4740 clk driver to the common clk framework
update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Fix the bit offsets for the LCD_CMD definitions.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

s/framebugger/framebuffer/
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'xoffset' and 'yoffset' are unsigned and hence cannot be less than 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'yoffset' is unsigned and hence cannot be less than 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

kfree on a NULL pointer is a no-op.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'break' after return statement is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'break' after return statement is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'reg_context' is local to this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

'info' is a pointer. Use NULL instead of 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

new_back is a pointer. Use NULL instead of 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>