- 09 2月, 2019 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Two arm64 fixes for -rc6. They resolve a kernel NULL dereference in kexec and bogus kernel page table dumping when userspace is configured for 52-bit virtual addressing. Summary: - Fix kernel oops when attemping kexec_file() with a NULL cmdline - Fix page table output in debugfs when ARM64_USER_VA_BITS_52=y" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: handle empty command-line arm64: ptdump: Don't iterate kernel page tables using PTRS_PER_PXX
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Just two fixes, both going to stable. - Our support for split pmd page table lock had a bug which could lead to a crash on mremap() when using the Radix MMU (Power9 only). - A fix for the PAPR SCM driver (nvdimm) we added last release, which had a bug where we might mis-handle a hypervisor response leading to us failing to attach the memory region. Thanks to: Aneesh Kumar K.V, Oliver O'Halloran" * tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Use the correct bind address powerpc/radix: Fix kernel crash with mremap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull signal fixes from Eric Biederman: "This contains four small fixes for signal handling. A missing range check, a regression fix, prioritizing signals we have already started a signal group exit for, and better detection of synchronous signals. The confused decision of which signals to handle failed spectacularly when a timer was pointed at SIGBUS and the stack overflowed. Resulting in an unkillable process in an infinite loop instead of a SIGSEGV and core dump" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Better detection of synchronous signals signal: Always notice exiting tasks signal: Always attempt to allocate siginfo for SIGSTOP signal: Make siginmask safe when passed a signal of 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of five minor fixes (although, tecnhincally, the aicxxx fix is for a major problem in that the driver won't load without it, but I think the fact it's taken us since 4.10 to discover this indicates that the user base for these things has declined)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxlflash: Prevent deadlock when adapter probe fails Revert "scsi: libfc: Add WARN_ON() when deleting rports" scsi: sd_zbc: Fix zone information messages scsi: target: make the pi_prot_format ConfigFS path readable scsi: aic94xx: fix module loading
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fix from Joerg Roedel: "Intel decided to leave the newly added Scalable Mode Feature default-disabled for now. The patch here accomplishes that" * tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Leave scalable mode default off
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) that breaks PCIe on I.MX SoCs (Thinh Nguyen)" * tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "This prevents excessive ACPI debug messages from being printed to the kernel log, which has started to happen after one of the recent ACPICA commits (Erik Schmauss)" * tag 'acpi-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Set debug output flags independent of ACPICA
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg KH: "Here are some small char and misc driver fixes for 5.0-rc6. Nothing huge here, some more binderfs fixups found as people use it, and there is a "large" selftest added to validate the binderfs code, which makes up the majority of this pull request. There's also some small mei and mic fixes to resolve some reported issues. All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mic: vop: Fix crash on remove mic: vop: Fix use-after-free on remove binderfs: remove separate device_initcall() fpga: stratix10-soc: fix wrong of_node_put() in init function mic: vop: Fix broken virtqueues mei: free read cb on ctrl_wr list flush samples: mei: use /dev/mei0 instead of /dev/mei mei: me: add ice lake point device id. binderfs: respect limit on binder control creation binder: fix CONFIG_ANDROID_BINDER_DEVICES selftests: add binderfs selftests
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fixes from Greg KH: "Here are some driver core fixes for 5.0-rc6. Well, not so much "driver core" as "debugfs". There's a lot of outstanding debugfs cleanup patches coming in through different subsystem trees, and in that process the debugfs core was found that it really should return errors when something bad happens, to prevent random files from showing up in the root of debugfs afterward. So debugfs was fixed up to handle this properly, and then two fixes for the relay and blk-mq code was needed as it was making invalid assumptions about debugfs return values. There's also a cacheinfo fix in here that resolves a tiny issue. All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: blk-mq: protect debugfs_create_files() from failures relay: check return of create_buf_file() properly debugfs: debugfs_lookup() should return NULL if not found debugfs: return error values, not NULL debugfs: fix debugfs_rename parameter checking cacheinfo: Keep the old value if of_property_read_u32 fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging/IIO driver fixes from Greg KH: "Here are some small iio and staging driver fixes for 5.0-rc6. Nothing big, just resolve some reported IIO driver issues, and one staging driver bug. One staging driver patch was added and then reverted as well. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()" staging: erofs: keep corrupted fs from crashing kernel in erofs_namei() staging: octeon: fix broken phylib usage iio: ti-ads8688: Update buffer allocation for timestamps tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some small tty and serial fixes for 5.0-rc6. Nothing huge, just a few small fixes for reported issues. The speakup fix is in here as it is a tty operation issue. All of these have been in linux-next for a while with no reported problems" * tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: fix race between flush_to_ldisc and tty_open staging: speakup: fix tty-operation NULL derefs serial: sh-sci: Do not free irqs that have already been freed serial: 8250_pci: Make PCI class test non fatal tty: serial: 8250_mtk: Fix potential NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Grek KH: "Here are some small USB fixes for 5.0-rc6. Nothing huge, the normal amount of USB gadget fixes as well as some USB phy fixes. There's also a typec fix as well. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Correct the PPS out_volt calculation usb: gadget: musb: fix short isoc packets with inventra dma usb: phy: am335x: fix race condition in _probe usb: dwc3: exynos: Fix error handling of clk_prepare_enable usb: phy: fix link errors usb: gadget: udc: net2272: Fix bitwise and boolean operations usb: dwc3: gadget: Handle 0 xfer length for OUT EP
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs fixes from Darrick Wong: "Here are a handful of XFS fixes to fix a data corruption problem, a crasher bug, and a deadlock. Summary: - Fix cache coherency problem with writeback mappings - Fix buffer deadlock when shutting fs down - Fix a null pointer dereference when running online repair" * tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: set buffer ops when repair probes for btree type xfs: end sync buffer I/O properly on shutdown error xfs: eof trim writeback mapping as soon as it is cached
-
git://anongit.freedesktop.org/drm/drm由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Missed fixes last week as had nothing until amdgpu showed up on Saturday. Other stuff has since rolled in along with some more amdgpu fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i, rockchip and omap fixes. amdgpu/radeon: - fix crash on passthrough for SI - fencing fix for shared buffers - APU hwmon fix - API powerplay fix - eDP freesync fix - PASID mgr locking fix - KFD warning fix - DC/powerplay fix - raven revision ids fix - vega20 doorbell fix i915: - SNB display fix - SKL srckey mask fix - ICL DDI clock selection fix vmwgfx: - DMA API fix - IOMMU detection fix - display fixes sun4i: - tcon clock fix rockchip: - SPDX identifier fix omap: - DSI fixes" * tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/omap: dsi: Hack-fix DSI bus flags drm/omap: dsi: Fix OF platform depopulate drm/omap: dsi: Fix crash in DSI debug dumps drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen drm/amd/display: Attach VRR properties for eDP connectors drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr drm/i915: always return something on DDI clock selection drm/i915: Fix skl srckey mask bits drm/vmwgfx: Improve on IOMMU detection drm/vmwgfx: Fix setting of dma masks drm/vmwgfx: Also check for crtc status while checking for DU active drm/vmwgfx: Fix an uninitialized fence handle value drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init drm/amdgpu: fix the incorrect external id for raven series drm/amdgpu: Implement doorbell self-ring for NBIO 7.4 drm/amd/display: Fix fclk idle state drm/amdgpu: Transfer fences to dmabuf importer drm/amd/powerplay: Fix missing break in switch ...
-
- 08 2月, 2019 13 次提交
-
-
由 Arun Parameswaran 提交于
Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374 ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: NArun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
drm-misc-fixes for v5.0-rc6: - Fixes to omap/dsi encoder. - Clock fix for sun4i. - Licensing header fix for rockchip. - Fix division by zero in the mode when trying to set a mode on i915 with GVT-g enabled. Signed-off-by: NDave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2019-02-07-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc6: - SNB DPLL sanitize - ICL DDI clock selection - SLK srckey mask Signed-off-by: NDave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lg2s6nur.fsf@intel.com
-
git://git.infradead.org/linux-platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver fixlet from Darren Hart: "Correct Documentation/ABI 4.21 KernelVersion to 5.0" * tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86: Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "Three security fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221) KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222) kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd fixes from Bruce Fields: "Two small nfsd bugfixes for 5.0, for an RDMA bug and a file clone bug" * tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux: svcrdma: Remove max_sge check at connect time nfsd: Fix error return values for nfsd4_clone_file_range()
-
由 Linus Torvalds 提交于
Merge tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Both of these fixes address issues in changes merged for 5.0-rc4: - Fix DM core's missing memory barrier before waitqueue_active() calls. - Fix DM core's clone_bio() to work when cloning a subset of a bio with an integrity payload; bio_integrity_trim() wasn't getting called due to bio_trim()'s early return" * tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: don't use bio_trim() afterall dm: add memory barrier before waitqueue_active
-
由 David S. Miller 提交于
Hangbin Liu says: ==================== fix two kernel panics when disabled IPv6 on boot up When disabled IPv6 on boot up, since there is no ipv6 route tables, we should not call rt6_lookup. Fix them by checking if we have inet6_dev pointer on netdevice. v2: Fix idev reference leak, declarations and code mixing as Stefano, Eric pointed. Since we only want to check if idev exists and not reference it, use __in6_dev_get() insteand of in6_dev_get(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: NJianlin Shi <jishi@redhat.com> Fixes: ca15a078 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: NJianlin Shi <jishi@redhat.com> Fixes: c40e89fd ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Reviewed-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Shier 提交于
Bugzilla: 1671904 There are multiple code paths where an hrtimer may have been started to emulate an L1 VMX preemption timer that can result in a call to free_nested without an intervening L2 exit where the hrtimer is normally cancelled. Unconditionally cancel in free_nested to cover all cases. Embargoed until Feb 7th 2019. Signed-off-by: NPeter Shier <pshier@google.com> Reported-by: NJim Mattson <jmattson@google.com> Reviewed-by: NJim Mattson <jmattson@google.com> Reported-by: NFelix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Message-Id: <20181011184646.154065-1-pshier@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Bugzilla: 1671930 Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with memory operand, INVEPT, INVVPID) can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Embargoed until Feb 7th 2019. Reported-by: NFelix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Jann Horn 提交于
kvm_ioctl_create_device() does the following: 1. creates a device that holds a reference to the VM object (with a borrowed reference, the VM's refcount has not been bumped yet) 2. initializes the device 3. transfers the reference to the device to the caller's file descriptor table 4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real reference The ownership transfer in step 3 must not happen before the reference to the VM becomes a proper, non-borrowed reference, which only happens in step 4. After step 3, an attacker can close the file descriptor and drop the borrowed reference, which can cause the refcount of the kvm object to drop to zero. This means that we need to grab a reference for the device before anon_inode_getfd(), otherwise the VM can disappear from under us. Fixes: 852b6d57 ("kvm: add device control API") Cc: stable@kernel.org Signed-off-by: NJann Horn <jannh@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 2月, 2019 11 次提交
-
-
由 Eric W. Biederman 提交于
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd ("Prioritize synchronous signals over 'normal' signals") Tested-by: NDmitry Vyukov <dvyukov@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: NDmitry Vyukov <dvyukov@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitSigned-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid由 Linus Torvalds 提交于
Pull HID fix from Jiri Kosina: "A fix for a bug in hid-debug that can lock up the kernel in infinite loop (CVE-2019-3819), from Vladis Dronov" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: debug: fix the ring buffer implementation
-
由 Erik Schmauss 提交于
There was a divergence between Linux and ACPICA on the definition of ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's definition in 4c1379d7. After resolving the divergence, it was clear that Linux users wanted to use their old set of debug flags. This change fixes the divergence by setting these debug flags during acpi_early_init() rather than during global variable initialization in acpixf.h (owned by ACPICA). Fixes: 4c1379d7 ("ACPICA: Debug output: Add option to display method/object evaluation") Reported-by: NMichael J Ruhl <michael.j.ruhl@intel.com> Reported-by: NAlex Gagniuc <Alex_Gagniuc@Dellteam.com> Signed-off-by: NErik Schmauss <erik.schmauss@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of a few small fixes. The most significant one is the fix for the possible race at loading HD-audio drivers. This has been present for long time and surfaced only in a rare occasion, but finally spotted out" * tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/ca0132 - Fix build error without CONFIG_PCI ALSA: compress: Fix stop handling on compressed capture streams ALSA: usb-audio: Add support for new T+A USB DAC ALSA: hda - Serialize codec registrations ALSA: hda/realtek - Use a common helper for hp pin reference ALSA: hda/realtek - Fix lose hp_pins for disable auto mute ALSA: hda/realtek - Headset microphone support for System76 darp5
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio fixes from Michael Tsirkin: "A small fix for a uapi header, and a fix for VDPA for non-x86 guests" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: drop internal struct from UAPI virtio: support VIRTIO_F_ORDER_PLATFORM
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "This has two fixes for uprobe code. - Cut and paste fix to have uprobe printks say "uprobe" and not "kprobe" - Add terminating '\0' byte when copying function arguments" * tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/uprobes: Fix output for multiple string arguments tracing: uprobes: Fix typo in pr_fmt string
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse fixes from Miklos Szeredi: "A fix for a CUSE regression introduced in v4.20, as well as fixes for a couple of old bugs" * tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: decrement NR_WRITEBACK_TEMP on the right page fuse: call pipe_buf_release() under pipe lock cuse: fix ioctl fuse: handle zero sized retrieve correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: - Mediatek Kconfig fix - Sunxi regulator, IRQ banks and pin base fixup - Intel Cherryview Strago DMI workaround - Potential regmap problem on mcp23s08 * tag 'pinctrl-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18 pinctrl: cherryview: fix Strago DMI workaround pinctrl: sunxi: Consider pin_base when calculating regulator array index pinctrl: sunxi: Fix and simplify pin bank regulator handling pinctrl: mediatek: fix Kconfig build errors for moore core
-
由 Bjorn Helgaas 提交于
8c56df37 ("net: add support for Cavium PTP coprocessor") added the Cavium PTP coprocessor driver and enabled it by default. Remove the "default y" because the driver only applies to Cavium ThunderX processors. Fixes: 8c56df37 ("net: add support for Cavium PTP coprocessor") Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Wei 提交于
dev_consume_skb_irq() should be called in sbdma_tx_process() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: NYang Wei <yang.wei9@zte.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-