perf_counter tools: Allow perf top top users to switch between weighted and individual counter display

Add [w]eighted hotkey.  Pressing [w] toggles between displaying
weighted total of all counters, and the counter selected via
[E]vent select key.

------------------------------------------------------------------------------
   PerfTop:   90395 irqs/sec  kernel:16.1% [cache-misses/cache-references/instructions],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

1275408.6      10881 -  5.3% - ffffffff81146f70 : copy_page_c
 553683.4      43569 - 21.3% - ffffffff81146f20 : clear_page_c
  74075.0       6768 -  3.3% - ffffffff81147190 : copy_user_generic_string
  40602.9       7538 -  3.7% - ffffffff81284ba2 : _spin_lock
  26882.1        965 -  0.5% - ffffffff8109d280 : file_ra_state_init

[w]

------------------------------------------------------------------------------
   PerfTop:   91221 irqs/sec  kernel:14.5% [10000Hz cache-misses],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

            47320.00 - 22.3% - ffffffff81146f20 : clear_page_c
            14261.00 -  6.7% - ffffffff810992f5 : __rmqueue
            11046.00 -  5.2% - ffffffff81146f70 : copy_page_c
             7842.00 -  3.7% - ffffffff81284ba2 : _spin_lock
             7234.00 -  3.4% - ffffffff810aa1d6 : unmap_vmas
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top used to have annotation support, but it has bitrotted and
removed.

This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.

known keys:
        [d]     select display delay.
        [e]     select display entries (lines).
        [E]     select annotation event counter.
        [f]     select normal display count filter.
        [F]     select annotation display count filter (percentage).
        [qQ]    quit.
        [s]     select annotation symbol and start annotation.
        [S]     stop annotation, revert to normal display.
        [z]     toggle event count zeroing.

Sample:
------------------------------------------------------------------------------
   PerfTop:   16719 irqs/sec  kernel:78.7% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing cache-misses for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                  /* adjust length to remove Ethernet CRC */
       0  0.0%                  if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
       0  0.0%                          length -= 4;
     436  5.0%      f039:       41 f6 84 24 5c 29 00    testb  $0x1,0x295c(%r12)
       0  0.0%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
       0  0.0%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
     811  9.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
       0  0.0%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    7226 82.6%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Available events:
        0 cache-misses
        1 cache-references
        2 instructions
        3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
   PerfTop:   15035 irqs/sec  kernel:79.0% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing instructions for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                                 int *work_done, int work_to_do)
       0  0.0%  {
     175  0.9%      eebf:       55                      push   %rbp
    1898  9.8%      eec0:       48 89 e5                mov    %rsp,%rbp
       0  0.0%
       0  0.0%          i = rx_ring->next_to_clean;
     140  0.7%      ef0a:       0f b7 41 1a             movzwl 0x1a(%rcx),%eax
     670  3.4%      ef0e:       89 45 ac                mov    %eax,-0x54(%rbp)
       0  0.0%  {
       0  0.0%          memcpy(skb->data + offset, from, len);
      91  0.5%      f07b:       49 8b b6 e8 00 00 00    mov    0xe8(%r14),%rsi
    1153  5.9%      f082:       48 8b b8 e8 00 00 00    mov    0xe8(%rax),%rdi
      42  0.2%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
      14  0.1%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
    1618  8.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%                  /* return some buffers to hardware, one at a time is too slow */
       0  0.0%                  if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
     867  4.5%      f0e7:       83 7d b0 0f             cmpl   $0xf,-0x50(%rbp)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
      37  0.2%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    4047 20.8%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We skip the display of idle routine related symbols because
they are typically rather erratic and confusing: they depend
on the IRQ rate or sometimes they dominate the profile if
they are polling based.

Add mwait_idle_with_hints too, this is one of the idle
routines on x86.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, perf top -p only tracks the pid provided, which isn't very useful
for watching forky loads, so give it an inherit option.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248165036.9795.10.camel@marge.simson.net>

Among perf annotate, perf report and perf top, we can find the
common colored printing of percents according to the following
rules:

    High overhead =  > 5%, colored in red
    Mid overhead =  > 0.5%, colored in green
    Low overhead =  < 0.5%, default color

Factorize these multiple checks in a single function named
percent_color_fprintf() and also provide a get_percent_color()
for sites which print percentages and other things at the same
time.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246558475-10624-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the -m/--modules option to perf report and perf annotate,
which enables live module symbol/image loading. To be used
with -k/--vmlinux.

(Also give perf annotate a -P/--full-paths option.)
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514986.13293.48.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514916.13293.46.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf_counter tools: Make symbol loading consistently return number of loaded symbols.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246514758.13293.42.camel@marge.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The tools/perf/util/rbtree.c copy already drifted by three
csets:

 4b324126
 4c601178
 16c047ad

So remove the copy and use the lib/rbtree.c directly, sharing
the source code while still generating a separate object file,
since tools/perf uses a far more agressive -O6 switch.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090701152837.GG15682@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations

All things considered it was still worth it so lets try with
this enabled for now.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Filter out some ppc64 specific idle loop functions and remove
leading '.' on ppc64 text symbols.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.995643441@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the list of symbols we skip into an array, making it
easier to add new ones.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.904782938@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix a copy and paste error, -z was setting the group option.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
LKML-Reference: <20090630230140.714204656@samba.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.

Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.

This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long.  This causes compiler warnings every time we
print a __u64 value with %Lx.

Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8.  These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.

The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__".  The other changes are:

* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
  to kill two remaining warnings.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A build error slipped in:

 builtin-report.c: In function ‘hist_entry__fprintf’:
 builtin-report.c:711: error: format ‘%12d’ expects type ‘int’, but argument 3 has type ‘uint64_t’

Because we got a bit sloppy with those types. uint64_t really sucks,
because there's no printf format for it. So standardize on __u64
instead - for all types that go to or come from the ABI (which is __u64),
or for values that need to be large enough even on 32-bit.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The rule is:

 - high overhead: red
 -  mid overhead: green
 -  low overhead: normal (white/black)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.

Standardize this case some more and explain the situation.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.

Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.

Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.

Hence this simple solution which partially covers the default
case.

[ Impact: fix display artifacts in perf top ]
Signed-off-by: NFrederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf list: List all the available event types which can be used in
-e (--event) options.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.

Also a zero refresh rate is not possible, neither do we want to
accept negative values.

[ Impact: fix division by zero in perf top ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A number of places said 'events' while they should say 'samples'.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Support frequency-based profiling and make it the default.

(Also add a Hz printout in perf top.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top is refreshed every delay_secs the thread runs in such
loop:

while (sleep(delay_secs)) {
	print_sym_table();
}

At the end of print_sym_table(), poll is used without sleep delay
to check if we have something from stdin.

It means that this check is done only every delay_secs, which can
be higher that 2 secs if the user defined a custom refresh rate.

We can drop sleep() here and directly use poll to wait between
refresh periods, so that the reaction after the user stops perf top
after typing "Enter" is immediate and doesn't suffer from the
delay_secs latency.

Nb: poll doesn't add any overhead that can parasite perf top measures
since it sleeps the entire timeout here.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244141284-7507-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use fork events to clone comm and map data and remove everything
munmap related
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add Git's color printing library to util/color.[ch].

Add it to perf report, with a trivial example to print high-overhead
entries in red, low-overhead entries in green.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also, add a suggestion to 'perf report', if the default sort order is
used.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On idle systems 'perf top' comes up empty by default, because the event
count filter is set to 100.

Reduce it to 5 instead.

Also add an option to limit the number of functions displayed.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

GCC 4.1.2 produces:

 util/parse-options.c: In function ‘get_value’:
 util/parse-options.c:36: warning: ‘arg’ may be used uninitialized in this function

 builtin-top.c: In function ‘display_thread’:
 builtin-top.c:178: warning: ‘printed’ may be used uninitialized in this function

Annotate them away by initializing these variables to 0.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

kerneltop has been replaced with perf top - so fix up a few
remaining references to it in display text and error messages.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The perf commands had different ways of describing themselves,
introduce a coherent command-file-header format taken from the
Git project.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Everything is nmi these days, remove the userspace bits so that
the kernel can drop the interface.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf_counter tools: Add locking to perf top

We need to protect the active_symbols list as two threads change it:
the main thread adding entries to the head and the display thread
decaying entries from any place in the list.

Also related: take a snapshot of syme->count[0] before using it to
calculate the weight and to show the same number used in this calc when
displaying the symbol usage.
Reported-by: NMike Galbraith <efault@gmx.de>
Tested-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529200307.GR4747@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>