Rely on global linux kernel version instead of static value.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use default ethtool version instead of static variant.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to overwrite global linux kernel version.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need in static driver version, use global
linux kernel version instead.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to set N/A if FW is not available.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean the code related to various versions: driver and module.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to set N/A for the ethtool fields.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delete driver and module versions in favor of global
linux kernel variant.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Size of LIQUIDIO_PACKAGE is 0 and it means that checks of package
version never worked, delete dead code.

Fixes: 32581245 ("liquidio: Consolidate common functionality")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drop driver version in favor of global to linux kernel version.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove driver and module version in favor of default one.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to explicitly set N/A if FW not available.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use linux kernel version for ethtool and module versions.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bjorn Andersson says:

====================
net: qrtr: Nameserver fixes

The need to respond to the HELLO message from the firmware was lost in the
translation from the user space implementation of the nameserver. Fixing this
also means we can remove the FIXME related to launching the ns.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 2 second delay before calling qrtr_ns_init() meant that the remote
processors would register as endpoints in qrtr and the say_hello() call
would therefor broadcast the outgoing HELLO to them. With the HELLO
handshake corrected this delay is no longer needed.
Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lost in the translation from the user space implementation was the
detail that HELLO mesages must be exchanged between each node pair.  As
such the incoming HELLO must be replied to.

Similar to the previous implementation no effort is made to prevent two
Linux boxes from continuously sending HELLO messages back and forth,
this is left to a follow up patch.

say_hello() is moved, to facilitate the new call site.

Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reviewed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Petr Machata says:

====================
selftests: Use busywait() in a couple places

Two helper function for active waiting for an event were recently
introduced: busywait() as the active-waiting tool, and until_counter_is()
as a configurable predicate that can be plugged into busywait(). Use these
in tc_common and mlxsw's qos_defprio instead of hand-coding equivalents.

Patches #1 and #2 extend lib.sh facilities to make the transition possible.
Patch #3 converts tc_common, and patch #4 qos_defprio.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of hand-coding the busywait() predicate, use the until_counter_is()
introduced recently.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A function busywait() was recently added based on the logic in
__tc_check_packets(). Convert the code in tc_common to use the new
function.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

until_counter_is() currently takes as an argument a number and the
condition holds when the current counter value is >= that number. Make the
function more generic by taking a partial expression instead of just the
number.

Convert the two existing users.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function tc_rule_stats_get() fetches a given statistic of a TC rule
given the rule preference. Another common way to reference a rule is using
its handle. Introduce a dual to the aforementioned function that gets a
statistic given rule handle.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NAmit Cohen <amitc@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Improve DATA_FIN transmission

MPTCP's DATA_FIN flag is sent in a DSS option when closing the
MPTCP-level connection. This patch series prepares for correct DATA_FIN
handling across multiple subflows (where individual subflows may
disconnect without closing the entire MPTCP connection) by changing the
way the MPTCP-level socket requests a DATA_FIN on a subflow and
propagates the necessary data for the TCP option.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a DATA_FIN is sent in a MPTCP DSS option that contains a data
mapping, the DATA_FIN consumes one byte of space in the mapping. In this
case, the DATA_FIN should only be included in the DSS option if its
sequence number aligns with the end of the mapped data. Otherwise the
subflow can send an incorrect implicit sequence number for the DATA_FIN,
and the DATA_ACK for that sequence number would not close the
MPTCP-level connection correctly.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of reading the MPTCP-level sequence number when sending DATA_FIN,
store the data in the subflow so it can be safely accessed when the
subflow TCP headers are written to the packet without the MPTCP-level
lock held. This also allows the MPTCP-level socket to close individual
subflows without closing the MPTCP connection.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MPTCP should wait for an active connection or skip sending depending on
the connection state, as TCP does. This happens before the possible
passthrough to a regular TCP sendmsg because the subflow's socket type
(MPTCP or TCP fallback) is not known until the connection is
complete. This is also relevent at disconnect time, where data should
not be sent in certain MPTCP-level connection states.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parav Pandit says:

====================
devlink: Introduce devlink port flavour virtual

Currently PCI PF and VF devlink devices register their ports as
physical port in non-representors mode.

Introduce a new port flavour as virtual so that virtual devices can
register 'virtual' flavour to make it more clear to users.

An example of one PCI PF and 2 PCI virtual functions, each having
one devlink port.

$ devlink port show
pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0
pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0
pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0

Patch summary:
Patch-1 Introduces new devlink port flavour 'virtual'.
Patch-2 Uses new flavour to register PCI VF virtual ports.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use newly introduce 'virtual' port flavour for devlink
port of PCI VF devlink device in non-representors mode.

While at it, remove recently introduced empty lines at end of the file.
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently mlx5 PCI PF and VF devlink devices register their ports as
physical port in non-representors mode.

Introduce a new port flavour as virtual so that virtual devices can
register 'virtual' flavour to make it more clear to users.

An example of one PCI PF and 2 PCI virtual functions, each having
one devlink port.

$ devlink port show
pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0
pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0
pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using vim to edit the phylink documentation reveals some mistakes due
to the "invisible" pythonesque white space indentation that can't be
seen with other editors. Fix it.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Paul Blakey says:

====================
act_ct: Software offload of conntrack_in

This series adds software offload of connections with an established
ct state using the NF flow table offload infrastructure, so
once such flows are offloaded, they will not pass through conntrack
again, and instead act_ct will restore the conntrack info metadata
on the skb to the state it had on the offload event - established.

Act_ct maintains an FT instance per ct zone. Flow table entries
are created, per ct connection, when connections enter an established
state and deleted otherwise. Once an entry is created, the FT assumes
ownership of the entry, and manages it's aging.

On the datapath, first lookup the skb in the zone's FT before going
into conntrack, and if a matching flow is found, restore the conntrack
info metadata on the skb, and skip calling conntrack.

Note that this patchset is part of the connection tracking offload feature.
Hardware offload of connections with an established ct state series will follow
this one.

Changelog:
   v1->v2:
     Removed now unused netfilter patches
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Offload nf conntrack processing by looking up the 5-tuple in the
zone's flow table.

The nf conntrack module will process the packets until a connection is
in established state. Once in established state, the ct state pointer
(nf_conn) will be restored on the skb from a successful ft lookup.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a ft entry when connections enter an established state and delete
the connections when they leave the established state.

The flow table assumes ownership of the connection. In the following
patch act_ct will lookup the ct state from the FT. In future patches,
drivers will register for callbacks for ft add/del events and will be
able to use the information to offload the connections.

Note that connection aging is managed by the FT.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the NF flow tables infrastructure for CT offload.

Create a nf flow table per zone.

Next patches will add FT entries to this table, and do
the software offload.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validate 100baseT1_Full to make this driver work with TJA1102 PHY.
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Acked-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data pointers of ipv6 sysctl are set one by one which is hard to
maintain, especially with kconfig. This patch simplifies it by using
math to point the per net sysctls into the appropriate struct net,
just like what we did for ipv4.
Signed-off-by: NCambda Zhu <cambda@linux.alibaba.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding ethtool stats for when XDP transmitted packets overrun the TX
queue. This is recorded separately for XDP_TX and ndo_xdp_xmit. This
is an important aid for troubleshooting XDP based setups.

It is currently a known weakness and property of XDP that there isn't
any push-back or congestion feedback when transmitting frames via XDP.
It's easy to realise when redirecting from a higher speed link into a
slower speed link, or simply two ingress links into a single egress.
The situation can also happen when Ethernet flow control is active.

For testing the patch and provoking the situation to occur on my
Espressobin board, I configured the TX-queue to be smaller (434) than
RX-queue (512) and overload network with large MTU size frames (as a
larger frame takes longer to transmit).

Hopefully the upcoming XDP TX hook can be extended to provide insight
into these TX queue overflows, to allow programmable adaptation
strategies.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

More zero-length array transformations from Gustavo A. R. Silva.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>