The "fw.psid" devlink info version is documented in devlink-info.rst,
and used by one driver. However, there is no associated macro for this
firmware version like there is for others. Add one now.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: factor out chip-specific PHY configuration to a separate source file

Basically every chip version needs its own PHY configuration.
To improve maintainability of the driver move all these PHY
configurations to a separate source file. To allow this we first have
to change all PHY configurations to use phylib functions wherever
possible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move chip-specific PHY configurations to separate source file
r8169_phy_config.c. This improves maintainability of the driver.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation of factoring out PHY configuration to a separate source
file move commonly used definitions to new header file r8169.h.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename rtl_apply_firmware() to r8169_apply_firmware() before exporting
it to avoid namespace clashes with other drivers for Realtek hardware.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass the phy_device as parameter to rtl8168d_apply_firmware_cond(),
this avoids having to access rtl8169_private internals.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_writephy and rtl_readphy with the respective phylib
functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_w0w1_phy with phylib functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_patchphy with phylib functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move configuring EEE on MAC side out of the PHY configuration.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Writing this ERI register is a MAC setting, so move it to
rtl_hw_start_8106().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch rtl_writephy_batch() to phylib functions, as a result we can
avoid passing a rtl8169_private parameter.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions use only the phy_device member of rtl8169_private,
so we can pass the phy_device as parameter directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions use only the phy_device member of rtl8169_private,
so we can pass the phy_device as parameter directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation of factoring out rtl8169scd_hw_phy_config() move this
quirk to rtl8169_init_phy().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a useless debug statement. This also allows to remove the
net_device parameter from rtl8169_init_phy().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preperation of factoring out the PHY configuration to a separate
source file this patch:
- avoids accessing rtl8169_private internals by passing the phy_device
  and mac_version as separate parameters
- renames rtl_hw_phy_config to r8169_hw_phy_config to avoid namespace
  clashes with other drivers for Realtek hardware
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Frame Preemption fixes

Two single fixes for the -next tree for recently introduced Frame Preemption
feature.

1) and 2) fixes the disabling of Frame Preemption that was not being correctly
handled because of a missing return.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If FPE is supposed to be disabled we need to return after disabling it.

Fixes: 7c728274 ("net: stmmac: gmac5+: Add support for Frame Preemption")
Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If FPE is supposed to be disabled we need to return after disabling it.

Fixes: f0e56c8d ("net: stmmac: xgmac3+: Add support for Frame Preemption")
Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alex Maftei says:

====================
sfc: even more code refactoring

Splitting even more of the driver code into different files, which
will later be used in another driver for a new product.

This is a continuation to my previous patch series, and the one
before it.
There will be a stand-alone patch as well after this - after which
the refactoring will be concluded, for now.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Includes a couple of filtering functions and also renames a constant.

Style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Functions are not related.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Various ethtool entry points are moved.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Page recycling code and GRO packet receipt code were moved.

One function contains code extracted from another.

Code style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code that handles transmission finalization will also be common.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
Multipath TCP: Prerequisites

v6 -> v7: Rename/move ULP clone helper to make inline-friendly (patch 5)

v5 -> v6: Fix BPF accessors for sk_type and sk_protocol (patch 2), fix
the width of an __unused bitfield (patch 6), and add some commit message
and comment text (patches 5 & 7).

v4 -> v5: Cover letter subject fix. No changes to commits.

v3 -> v4: Update coalesce/collapse of incoming MPTCP skbs (patch 7)

v2 -> v3: Ensure sk_type alignment in struct sock (patch 2)

v1 -> v2: sk_pacing_shift left as a regular struct member (patch 2), and
modified SACK space check based on recent -net fix (patch 9).

The MPTCP upstreaming community has been collaborating on an
upstreamable MPTCP implementation that complies with RFC 8684. A minimal
set of features to comply with the specification involves a sizeable set
of code changes, so David requested that we split this work in to
multiple, smaller patch sets to build up MPTCP infrastructure.

The minimal MPTCP feature set we are proposing for review in the v5.6
timeframe begins with these three parts:

Part 1 (this patch set): MPTCP prerequisites. Introduce some MPTCP
definitions, additional ULP and skb extension features, TCP option space
checking, and a few exported symbols.

Part 2: Single subflow implementation and self tests.

Part 3: Switch from MPTCP v0 (RFC 6824) to MPTCP v1 (new RFC 8684,
publication expected in the next few days).

Additional patches for multiple subflow support, path management, active
backup, and other features are in the pipeline for submission after
making progress with the above reviews.

Clone/fetch:
https://github.com/multipath-tcp/mptcp_net-next.git (tag: netdev-v7-part1)

Browse:
https://github.com/multipath-tcp/mptcp_net-next/tree/netdev-v7-part1

Thank you for your review. You can find us at mptcp@lists.01.org and
https://is.gd/mptcp_upstream
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we can allocate the extension only after the skb,
this change allows the user to do the opposite, will simplify
allocation failure handling from MPTCP.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we will find stray/unexpected/old extensions value on next
iteration.

On tcp_write_xmit() we can end-up splitting an already queued skb in two
parts, via tso_fragment(). The newly created skb can be allocated via
the tx cache and an upper layer will not be aware of it, so that upper
layer cannot set the ext properly.

Resetting the ext on recycle ensures that stale data is not propagated
in to packet headers or elsewhere.

An alternative would be add an additional hook in tso_fragment() or in
sk_stream_alloc_skb() to init the ext for upper layers that need it.
Co-developed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the SACK check to work with zero option space available, a case
that's possible with MPTCP but not MD5+TS. Maintained only one
conditional branch for insufficient SACK space.

v1 -> v2:
- Moves the check inside the SACK branch by taking recent SACK fix:

    9424e2e7 (tcp: md5: fix potential overestimation of TCP option space)

  in to account, but modifies it to work in MPTCP scenarios beyond the
  MD5+TS corner case.
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MPTCP will make use of tcp_send_mss() and tcp_push() when sending
data to specific TCP subflows.

tcp_request_sock_ipvX_ops and ipvX_specific will be referenced
during TCP subflow creation.
Co-developed-by: NPeter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: NPeter Krystad <peter.krystad@linux.intel.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Coalesce and collapse of packets carrying MPTCP extensions is allowed
when the newer packet has no extension or the extensions carried by both
packets are equal.

This allows merging of TSO packet trains and even cross-TSO packets, and
does not require any additional action when moving data into existing
SKBs.

v3 -> v4:
 - allow collapsing, under mptcp_skb_can_collapse() constraint

v5 -> v6:
 - clarify MPTCP skb extensions must always be cleared at allocation
   time
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add enum value for MPTCP and update config dependencies

v5 -> v6:
 - fixed '__unused' field size
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If ULP is used on a listening socket, icsk_ulp_ops and icsk_ulp_data are
copied when the listener is cloned. Sometimes the clone is immediately
deleted, which will invoke the release op on the clone and likely
corrupt the listening socket's icsk_ulp_data.

The clone operation is invoked immediately after the clone is copied and
gives the ULP type an opportunity to set up the clone socket and its
icsk_ulp_data.

The MPTCP ULP clone will silently fallback to plain TCP on allocation
failure, so 'clone()' does not need to return an error code.

v6 -> v7:
 - move and rename ulp clone helper to make it inline-friendly
v5 -> v6:
 - clarified MPTCP clone usage in commit message
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP option 30 is allocated for MPTCP by the IANA.
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP),
IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing
IPPROTO numbers mostly map directly to IANA-specified protocol numbers.
MPTCP does not have a protocol number allocated because MPTCP packets
use the TCP protocol number. Use private number not used OTA.
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>