Move raw_pg_to_pg() call out of get_temp_osds() and into
ceph_pg_to_up_acting_osds(), for upcoming apply_upmap().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

pg_temp and pg_upmap encodings are the same (PG -> array of osds),
except for the incremental remove: it's an empty mapping in new_pg_temp
for pg_temp and a separate old_pg_upmap set for pg_upmap.  (This isn't
to allow for empty pg_upmap mappings -- apparently, pg_temp just wasn't
looked at as an example for pg_upmap encoding.)

Reuse __decode_pg_temp() for decoding pg_upmap and new_pg_upmap.
__decode_pg_temp() stores into pg_temp union member, but since pg_upmap
union member is identical, reading through pg_upmap later is OK.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Some of these won't be as efficient as they could be (e.g.
ceph_decode_skip_set(... 32 ...) could advance by len * sizeof(u32)
once instead of advancing by sizeof(u32) len times), but that's fine
and not worth a bunch of extra macro code.

Replace skip_name_map() with ceph_decode_skip_map as an example.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Switch to DEFINE_RB_FUNCS2-generated {insert,lookup,erase}_pg_mapping().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Make __{lookup,remove}_pg_mapping() look like their ceph_spg_mapping
counterparts: take const struct ceph_pg *.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Initially for ceph_pg_mapping, ceph_spg_mapping and ceph_hobject_id,
compared with ceph_pg_compare(), ceph_spg_compare() and hoid_compare()
respectively.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

For luminous and beyond we are encoding the actual spgid, which
requires operating with the correct pg_num, i.e. that of the target
pool.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

need_check_tiering logic doesn't make a whole lot of sense.  Drop it
and apply tiering unconditionally on every calc_target() call instead.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Otherwise we may miss events like PG splits, pool deletions, etc when
we get multiple incremental maps at once.  Because check_pool_dne() can
now be fed an unlinked request, finish_request() needed to be taught to
handle unlinked requests.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When processing a map update consisting of multiple incrementals, we
may end up running check_linger_pool_dne() on a lingering request that
was previously added to need_resend_linger list.  If it is concluded
that the target pool doesn't exist, the request is killed off while
still on need_resend_linger list, which leads to a crash on a NULL
lreq->osd in kick_requests():

    libceph: linger_id 18446462598732840961 pool does not exist
    BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
    IP: ceph_osdc_handle_map+0x4ae/0x870
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Note that ceph_osd_request_target fields are updated regardless of
RESEND_ON_SPLIT.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Replace it with more fine-grained bools to separate updating
ceph_osd_request_target fields and the decision to resend.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Give upper layers a chance to reencode the message after the connection
is negotiated and ->peer_features is set.  OSD client will use this to
support both luminous and pre-luminous OSDs (in a single cluster): the
former need MOSDOp v8; the latter will continue to be sent MOSDOp v4.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Factor out encode_{pgid,oloc}() and use ceph_encode_string() for oid.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Store both raw pgid and actual spgid in ceph_osd_request_target.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The old (v15) pi->last_force_request_resend has been repurposed to
make pre-RESEND_ON_SPLIT clients that don't check for PG splits but do
obey pi->last_force_request_resend resend on splits.  See ceph.git
commit 189ca7ec6420 ("mon/OSDMonitor: make pre-luminous clients resend
ops on split").
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Only MON_STATEFUL_SUB, really.  MON_ROUTE_OSDMAP and
OSDSUBOP_NO_SNAPCONTEXT are irrelevant.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The code has been in place since commit 63244fa1 ("libceph:
introduce ceph_osd_request_target, calc_target()"), and, with the
ceph_{oloc,oid}_copy() issue fixed in the previous commit, is now
in working order.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Reflects ceph.git commit ff1959282826ae6acd7134e1b1ede74ffd1cc04a.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Current code does not update ceph_dentry_info::lease_session once
it is set. If auth mds of corresponding dentry changes, dentry lease
keeps in an invalid state.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Current ceph uses FSID as primary index key of fscache data. This
allows ceph to retain cached data across remount. But this causes
problem (kernel opps, fscache does not support sharing data) when
a filesystem get mounted several times (with fscache enabled, with
different mount options).

The fix is adding a new mount option, which specifies uniquifier
for fscache.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

extra_mon_dispatch() and debugfs' foo_show functions dereference
fsc->mdsc. we should clean up fsc->client->extra_mon_dispatch
and debugfs before destroying fsc->mds.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Previously we were returning values for quota, layout
xattrs without any kind of update -- the user just got
whatever happened to be in our cache.

Clearly this extra round trip has a cost, but reads of
these xattrs are fairly rare, happening on admin
intervention rather than in normal operation.

Link: http://tracker.ceph.com/issues/17939Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Don't re-send interrupted flock request in cases of mds failover
and receiving request forward. Because corresponding 'lock intr'
request may have been finished, it won't get re-sent.

Link: http://tracker.ceph.com/issues/20170Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Ceph needs to flush dirty page in the order in which in which snap
context they belong to. Dirty pages belong to older snap context
should be flushed earlier. if writepage_nounlock() can not flush a
page, it should redirty the page.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Callers of writepage_nounlock() have already ensured non-null
page->mapping.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The old 'approaching max_size' code expects MDS set max_size to
'2 * reported_size'. This is no longer true. The new code reports
file size when half of previous max_size increment has been used.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The 'wanted max size' could be sent to inode's old auth mds, re-send
it to inode's new auth mds if necessary. Otherwise write syscall may
hang.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NSylvain 'ythier' Hitier <sylvain.hitier@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull MIPS fixes from Ralf Baechle:
 "Here's a final round of fixes for 4.12:

   - Fix misordered instructions in assembly code making kenel startup
     via UHB unreliable.

   - Fix special case of MADDF and MADDF emulation.

   - Fix alignment issue in address calculation in pm-cps on 64 bit.

   - Fix IRQ tracing & lockdep when rescheduling

   - Systems with MAARs require post-DMA cache flushes.

  The reordering fix and the MADDF/MSUBF fix have sat in linux-next for
  a number of days. The others haven't propagated from my pull tree to
  linux-next yet but all have survived manual testing and Imagination's
  automated test system and there are no pending bug reports"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Avoid accidental raw backtrace
  MIPS: Perform post-DMA cache flushes on systems with MAARs
  MIPS: Fix IRQ tracing & lockdep when rescheduling
  MIPS: pm-cps: Drop manual cache-line alignment of ready_count
  MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
  MIPS: head: Reorder instructions missing a delay slot