Correcting the GPMC_PREFETCH_CONTROL register address
Signed-off-by: NThara Gopinath <thara@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Channel should be marked active only when DMA is really started. Otherwise
just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch will cause
incorrect dump_stack().
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: acpiphp: cleanup notify handler on all root bridges
  PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.
  PCI: Restrict VPD read permission to root

* 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linux:
  I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device.
  I2C: S3C2410: Fixup error codes returned rom a transfer.
  I2C: S3C2410: Check ACK on byte transmission

* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block:
  Properly notify block layer of sync writes
  block: Fix the starving writes bug in the anticipatory IO scheduler

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] export account_system_vtime
  [IA64] Bugfix for system with 32 cpus

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected
  V4L/DVB (8145a): USB Video Class driver

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix /proc/ide/ide?/mate reporting
  Revert "BAST: Remove old IDE driver"

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off
  [ARM] 5117/1: pxafb: fix __devinit/exit annotations
  [ARM] Export dma_sync_sg_for_device()
  [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it
  [ARM] 5116/1: pxafb: cleanup and fix order of failure handling
  [ARM] 5115/1: pxafb: fix ifdef for command line option handling
  ARM: OMAP: Correcting the gpmc prefetch control register address
  ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq

Not sure how this came to get inverted but it appears to have been my
mess up.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix divide error when trying to configure rt_period to zero

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix bad hint about irqs in i2c.h
  i2c: Documentation: fix device matching description

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: fix hotplug vs rcu race

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix NODES_SHIFT Kconfig range

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] esp: tidy up target reference counting
  [SCSI] esp: Fix OOPS in esp_reset_cleanup().
  [SCSI] ses: Fix timeout

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: use cond_resched

* 'for-2.6.26' of git://neil.brown.name/md:
  Fix error paths if md_probe fails.
  Don't acknowlege that stripe-expand is complete until it really is.
  Ensure interrupted recovery completed properly (v1 metadata plus bitmap)

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc/mpc5200: Fix lite5200b suspend/resume
  powerpc/legacy_serial: Bail if reg-offset/shift properties are present
  powerpc/bootwrapper: update for initrd with simpleImage

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  net: fib_rules: fix error code for unsupported families
  netdevice: Fix wrong string handle in kernel command line parsing
  net: Tyop of sk_filter() comment
  netlink: Unneeded local variable
  net-sched: fix filter destruction in atm/hfsc qdisc destruction
  net-sched: change tcf_destroy_chain() to clear start of filter list
  ipv4: fix sysctl documentation of time related values
  mac80211: don't accept WEP keys other than WEP40 and WEP104
  hostap: fix sparse warnings
  hostap: don't report useless WDS frames by default
  textsearch: fix Boyer-Moore text search bug
  netfilter: nf_conntrack_tcp: fixing to check the lower bound of valid ACK
  ipv6 route: Convert rt6_device_match() to use RT6_LOOKUP_F_xxx flags.
  netlabel: Fix a problem when dumping the default IPv6 static labels
  net/inet_lro: remove setting skb->ip_summed when not LRO-able
  inet fragments: fix race between inet_frag_find and inet_frag_secret_rebuild
  CONNECTOR: add a proc entry to list connectors
  netlink: Fix some doc comments in net/netlink/attr.c
  tcp: /proc/net/tcp rto,ato values not scaled properly (v2)
  include/linux/netdevice.h: don't export MAX_HEADER to userspace
  ...

When scheduled swaps occur, we need to blit between front & back
buffers.  If the buffers are tiled, we need to set the appropriate
XY_SRC_COPY tile bit, but only on 965 chips, since it will cause
corruption on pre-965 (e.g. 945).

Bug reported by and fix tested by Tomas Janousek <tomi@nomi.cz>.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 656acd2b ("Input: fix locking in
force-feedback core") causes the following regression on m68k:

| linux/drivers/input/ff-core.c: In function 'input_ff_upload':
| linux/drivers/input/ff-core.c:172: error: dereferencing pointer to incomplete type
| linux/drivers/input/ff-core.c: In function 'erase_effect':
| linux/drivers/input/ff-core.c:197: error: dereferencing pointer to incomplete type
| linux/drivers/input/ff-core.c:204: error: dereferencing pointer to incomplete type
| make[4]: *** [drivers/input/ff-core.o] Error 1

As the incomplete type is `struct task_struct', including <linux/sched.h> fixes
it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During the development of the physical PCI slot patch series, Gary Hade
kept on reporting strange oopses due to interactions between pci_slot
and acpiphp.

	http://lkml.org/lkml/2007/11/28/319

find_root_bridges() unconditionally installs
handle_hotplug_event_bridge() as an ACPI_SYSTEM_NOTIFY handler for all
root bridges.

However, during module cleanup, remove_bridge() will only remove the
notify handler iff the root bridge had a hot-pluggable slot directly
underneath. That is:

	root bridge -> hotplug slot

But, if the topology looks like either of the following:

	root bridge -> non-hotplug slot
	root bridge -> p2p bridge -> hotplug slot

Then we currently do not remove the notify handler from that root
bridge.

This can cause a kernel oops if we modprobe acpiphp later and it gets
loaded somewhere else in memory. If the root bridge then receives a
hotplug event, it will then attempt to call a stale, non-existent notify
handler and we blow up.

Much thanks goes to Gary Hade for his persistent debugging efforts.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NGary Hade <garyhade@us.ibm.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
VPD end tag will hang the device.  This problem was initially
observed when a vpd entry was created in sysfs
('/sys/bus/pci/devices/<id>/vpd').   A read to this sysfs entry
will dump 32k of data.  Reading a full 32k will cause an access
beyond the VPD end tag causing the device to hang.  Once the device
is hung, the bnx2 driver will not be able to reset the device.
We believe that it is legal to read beyond the end tag and
therefore the solution is to limit the read/write length.

A majority of this patch is from Matthew Wilcox who gave code for
reworking the PCI vpd size information.  A PCI quirk added for the
Broadcom NIC's to limit the read/write's.
Signed-off-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

UVC makefile defines obj as:
	obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o
Instead of:
	obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o

Due to that, if uvc is selected, all obj-y or obj-m that were added to
compilation were forget. This breaks a proper kernel build.
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add cond_resched() to prevent monopolising CPU when processing large bios.

dm-crypt processes encryption of bios in sector units.  If the bio request
is big it can spend a long time in the encryption call.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Tested-by: NYan Li <elliot.li.tech@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The errno code returned must be negative.

Fixes "RTNETLINK answers: Unknown error 18446744073709551519".
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

v1->v2: Use strlcpy() to ensure s[i].name be null-termination.

1. In netdev_boot_setup_add(), a long name will leak.
   ex. : dev=21,0x1234,0x1234,0x2345,eth123456789verylongname.........
2. In netdev_boot_setup_check(), mismatch will happen if s[i].name
   is a substring of dev->name.
   ex. : dev=...eth1 dev=...eth11

[ With feedback from Ben Hutchings. ]
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parameter "needlock" no long exists.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already have a variable, which has the same capability.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Filters need to be destroyed before beginning to destroy classes
since the destination class needs to still be alive to unbind the
filter.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass double tcf_proto pointers to tcf_destroy_chain() to make it
clear the start of the filter list for more consistency.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These sysctl values are time related and all use the same routine
(proc_dointvec_jiffies) that internally converts from seconds to jiffies.
The code is fine, the documentation is just wrong.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suspend/resume ("echo mem > /sys/power/state") does not work with
vanilla kernels -- the system does not suspend correctly and just
hangs. This patch fixes this so suspend/resume works:

1) of_iomap does not map the whole 0xC000 of the MPC5200 immr so
saving registers does not work.
2) PCI registers need to be saved and restored.
Signed-off-by: NTim Yamin <plasm@roo.me.uk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The legacy serial driver does not work with an 8250 type UART that is
described in the device tree with the reg-offset and reg-shift
properties.  This change makes legacy_serial ignore these devices.
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

i2c.h mentions -1 as a not-issued irq. This false hint was taken by
of_i2c and caused crashes. Don't give any advice as 'no irq' is not
consistent across all architectures yet and it is not needed internally
by the i2c-core.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The matching process described for new style clients in
Documentation/i2c/writing-clients is classed as out-of-date
as it requires the presence of an .id_table entry in the
driver's i2c_driver entry.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This change to the makefile corrects the build of a simpleImage with initrd.
Signed-off-by: NJohn Linn <john.linn@xilinx>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Some PCI devices will lock up if we attempt to read from VPD addresses
beyond some device-dependent limit.  Until we can identify these
devices and adjust the file size accordingly, only let root read VPD
through sysfs to prevent a DoS by normal users.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller
to ensure that it can be autoloaded on the S3C2440 systems that
we support.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>