This makes it possible to enable the Exynos platform as part of a
multiplatform kernel.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Instead of repeating the Kconfig entries for every SoC,
move them under ARCH_EXYNOS3, 4 and 5 and move the entries
common to 3, 4 and 5 under ARCH_EXYNOS.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

EXYNOS5410 is SoC in Samsung's Exynos5 SoC series.
Add initial support for this SoC.
Signed-off-by: NTarek Dakhran <t.dakhran@samsung.com>
Signed-off-by: NVyacheslav Tyrtov <v.tyrtov@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch fix the offset of CPU boot address and don't
need to send smc call of SMC_CMD_CPU1BOOT command for
secondary CPU boot because Exynos3250 removes WFE in
secure mode.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add Exynos3250's SoC ID. Exynos 3250 is SoC that
is based on the 32-bit RISC processor for Smartphone.
Exynos3250 uses Cortex-A7 dual cores and has a target speed
of 1.0GHz.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos5800 is an octa core SoC which is based on the 5420
platform. This patch adds the basic support for it in the
mach-exynos.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch add basic arch side support for exynos5260 SoC.
Note that this is required to enable build for clock driver.
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

A look at the code reveals use of S5P_VA_SYSRAM macro, in case of certain SoC
revisions, which is not valid any longer, after SYSRAM started to be mapped
dynamically. The new dynamic mapping is stored in sysram_base_addr variable,
which is declared static in platsmp.c

This fix makes sysram_base_addr non-static, declared it in common.h and used
in pm.c instead of S5P_VA_SYSRAM.
Suggested-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

No more dependency on the arch code. The platform_data field is used to set the
PM callback as the other cpuidle drivers.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This macro is only used there.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The code to initiate and exit the powerdown sequence is the same in
pm.c and cpuidle.c.

Let's split the common part in the pm.c and reuse it from the cpu_pm notifier.

That is one more step forward to make the cpuidle driver arch indenpendant.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

In order to remove depedency on pm code, let's move the 'exynos_enter_aftr'
function into the pm.c file as well as the other helper functions.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Let's encapsulate the AFTR state specific call into a single function.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

There is no point to register the cpuidle driver for the 5440 as it has only
one WFI state which is the default idle function when the cpuidle driver is
disabled.

By disabling cpuidle we prevent to enter to the governor computation for
nothing, thus saving a lot of processing time.

The only drawback is the statistic via sysfs on this state which is lost but
it is meaningless and it could be retrieved from the ftrace easily.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Acked-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Pass the wakeup mask to 'exynos_set_wakeupmask' as this function could
be used for different idle states with different mask.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The scu_enable function is already a noop in the scu's header file is
CONFIG_SMP=n, so no need to use these macros in the code.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

We make the cpuidle code less arch dependent.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use the cpu_pm_enter/exit notifier to group some pm code inside the
pm file.

The save and restore code is duplicated across pm.c and cpuidle.c. By
using the cpu_pm notifier, we can factor out the routine.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This function should be called only when the powerdown sequence fails.

Even if the current code does not hurt, by moving this line, we have
the same code than the one in pm.c.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the code around to differentiate different section of code and
prepare it to be factored out in the next patches.

The call order changed but hat doesn't have a side effect because
they are independent. The important call is cpu_do_idle() which must
be done the last.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

That makes the code cleaner and encapsulted. The function will be
reused in the next patch.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The driver was initially written for exynos4 but the driver is used
also for exynos5.

Change the function prefix name exynos4 -> exynos
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use the cpuidle generic function 'cpuidle_register'. That saves us
from some extra lines of code and unneeded variables.

A side effect of this change is a bug fix where before the cpuidle
driver was registered for each_online_cpu and now it is for
each_possible_cpu.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the structure below the 'exynos4_enter_lowpower' function so no
more need of forward declaration.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Now with common clock support added for exynos5250 it is necessary to
move this code to exynos5250 common clock driver as clock registers
should be handled there. This change is tested in exynos5250 based
arndale platform.

Cc: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsugn.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
[t.figa: Rebased onto current kernel sources.]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This removes the need for mach/-headers in the debug macro.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Using the lowlevel debug uart is a corner case - even more so in a
multiplatform environment. So it seems reasonable to simply let the
developer set the appropriate uart type for the debugged SoC.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

addruart from the generic debug macro is doing exactly the same using
the common lowlevel uart definition, so there is no cause for this
special casing for s3c24xx.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos specific macros and declarations have been moved to
mach-exynos. Inclusion of plat/cpu.h is no more necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move Exynos specific macros to mach-exynos from plat-samsung to avoid
unnecessary dependency on plat based header files.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

'exynos_subsys' has no users. Remove this code.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Group all files compiled under common config option together.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

A common macro v7_exit_coherency_flush available which does the below
tasks in the seqeunce.
-clearing C bit
-clearing L1 cache
-exit SMP
-instruction and data synchronization

So removing the local functions which does the same thing and use the
macro instead.
Signed-off-by: NLeela Krishna Amudala <leela.krishna@linaro.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
[cw00.choi@samsung.com: tested on exynos3250 based board]
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The following parameters are no longer needed by the edma driver since the
information can be obtained from the IP's CCCFG register:
n_channel, n_region, n_slot and n_tc.
Remove the initialization of n_cc as well since in this context it has no
meaning. We have separate edma_soc_info struct/eDMA3_CC instance so this
member does not make any sense (and the driver no longer uses it).
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

dma-channels, ti,edma-regions and ti,edma-slots no longer needed in DT since
the the same information is available in the IP's CCCFG register.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

dma-channels, ti,edma-regions and ti,edma-slots no longer needed in DT since
the the same information is available in the IP's CCCFG register.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>