- 29 5月, 2011 3 次提交
-
-
由 Benny Halevy 提交于
Some definitions in the header file depend on nfs_fs.h so pnfs.h can't be included independently. Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Benny Halevy 提交于
deviceids are unique per server, per layout type. Therefore, in the global cache in the files layout driver deviceids from different servers may clash so we need to qualify them with a struct nfs_client that represents the nfs server that returned the deviceid. Introduced in 2.6.39 commit ea8eecdd "NFSv4.1 move deviceid cache to filelayout driver" Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
由 Jim Rees 提交于
Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
-
- 12 5月, 2011 3 次提交
-
-
由 Trond Myklebust 提交于
Currently, writebacks may end up recursing back into the filesystem due to GFP_KERNEL direct reclaims in the pnfs subsystem. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Prevents an infinite loop as list was never emptied. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Free the slot and resend the RPC with new session <slot#,seq#>. For nfs4_async_handle_error, return -EAGAIN and set the task->tk_status to 0 to restart the async rpc in the rpc_restart_call_prepare state which resets the slot. For nfs4_handle_exception, retrying a call that uses nfs4_call_sync will reset the slot via nfs41_call_sync_prepare. For open/close/lock/locku/delegreturn/layoutcommit/unlink/rename/write cachethis is true, so these operations will not trigger an NFS4ERR_RETRY_UNCACHED_REP. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2011 3 次提交
-
-
由 Jeff Layton 提交于
On a remount, the VFS layer will clear the MS_SYNCHRONOUS bit on the assumption that the flags on the mount syscall will have it set if the remounted fs is supposed to keep it. In the case of "noac" though, MS_SYNCHRONOUS is implied. A remount of such a mount will lose the MS_SYNCHRONOUS flag since "sync" isn't part of the mount options. Reported-by: NMax Matveev <makc@redhat.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
When compiling, I was getting this warning: fs/nfs/nfs4xdr.c: In function ‘decode_secinfo’: fs/nfs/nfs4xdr.c:4839:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] We were unconditionally returning 0 as long as there wasn't an error coming out of xdr_inline_decode(). We probably want to check the error status coming out of decode_op_hdr() and decode_secinfo_gss(), rather than assuming that everything is OK all the time. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When readdir() returns a directory entry for the root of a mounted filesystem, Linux follows the old convention of returning the inode number of the covered directory (despite newer versions of POSIX declaring that this is a bug). To ensure this continues to work, the NFSv4 readdir implementation requests the 'mounted-on-fileid' from the server. However, readdirplus also needs to instantiate an inode for this entry, and for that, we also need to request the real fileid as per this patch. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 4月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
The following patch ensures that we do not get permanently trapped in the RPC layer when trying to establish a new client id or session. This again ensures that the state manager can finish in a timely fashion when the last filesystem to reference the nfs_client exits. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If a server for some reason keeps sending NFS4ERR_DELAY errors, we can end up looping forever inside nfs4_proc_create_session, and so the usual mechanisms for detecting if the nfs_client is dead don't work. Fix this by ensuring that we loop inside the nfs4_state_manager thread instead. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 4月, 2011 2 次提交
-
-
由 Bryan Schumaker 提交于
I only want to try other secflavors during an initial mount if NFS4ERR_WRONGSEC is returned. nfs4_handle_exception() could potentially map other errors to EPERM, so we should handle this error specially for correctness. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
If we fail to contact the gss upcall program, then no message will be sent to the server. The client still updated the sequence number, however, and this lead to NFS4ERR_SEQ_MISMATCH for the next several RPC calls. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 4月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
Currently, the state manager may continue to try recovering state forever even after the last filesystem to reference that nfs_client has umounted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 14 4月, 2011 6 次提交
-
-
由 Bryan Schumaker 提交于
While decoding a secinfo reply, I store the list of supported sec flavors on a page accessible through res->flavors. Before reading each new flavor, I do some math to determine if there is enough space left on this page, and I break out of my read look if there isn't. In order to perform this check correctly, I need to use the address of res->flavors, rather than the address of res. When this loop was broken early I lied to the caller and told them that the entire list had been decoded. This could lead to problems if the caller tries to use any the garbage data claiming to be a valid sec flavor. I fixed this by using res->flavors->num_flavors as a counter, incrementing it every time a sec flavor is successfully decoded. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
We were always attempting sec flavor negotiation, even if the user told us a specific sec flavor to use. If that sec flavor fails, we should return an error rather than continuing with sec flavor negotiation. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
nfs4_lookup_root() is already configured to use either RPC_AUTH_UNIX or a user specified flavor (through -o sec=<whatever>). We should use this flavor first, and only attempt negotiation if it fails with -EPERM. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
NFS_MAX_SECFLAVORS should already take into account RPC_AUTH_UNIX and RPC_AUTH_NULL, so we don't need to set aside extra slots for them. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
There can be an infinite loop if gss_create_upcall() is called without the userspace program running. To prevent this, we return -EACCES if we notice that pipe_version hasn't changed (indicating that the pipe has not been opened). Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
mark_inode_dirty_sync() grabs the same inode lock! race conditions between holding the lock in pnfs_set_layoutcommit() and in mark_inode_dirty_sync() can result in a second call to pnfs_layoutcommit_inode(), but this will be a noop as NFS_INO_LAYOUTCOMMIT won't be set in the second call Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 4月, 2011 5 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The inode was used in an earlier version of the code, but it isn't used anymore. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We only need to call nfs_mark_request_dirty() once in nfs_writepage_setup(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
In fs/nfs/super.c::nfs_fs_mount() we test for a NULL 'data': ... if (data == NULL || mntfh == NULL) goto out_free_fh; ... and then further down in the function we test 'data' again: ... nfs_fscache_get_super_cookie( s, data ? data->fscache_uniq : NULL, NULL); ... this second check is just dead code since there is no way 'data' could possibly be NULL here. We also rely on a non-NULL 'data' in more than one location between these two tests, further proving the point that the second test is bogus. This patch removes the dead code. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Dave Chinner 提交于
nfs_scan_commit() is called with the inode->i_lock held, but it then calls __mark_inode_dirty() while still holding the lock. This causes a deadlock. Push the inode->i_lock into nfs_scan_commit() so it can protect only the parts of the code it needs to and can be dropped before the call to __mark_inode_dirty() to avoid the deadlock. Signed-off-by: NDave Chinner <dchinner@redhat.com> Tested-by: NWill Simoneau <simoneau@ele.uri.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2011 1 次提交
-
-
由 Bryan Schumaker 提交于
When attempting an initial mount, we should only attempt other authflavors if AUTH_UNIX receives a NFS4ERR_WRONGSEC error. This allows other errors to be passed back to userspace programs. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 4月, 2011 1 次提交
-
-
由 Bryan Schumaker 提交于
rpc_authflavor_t is cast from an unsigned int, but the initial code tried to use it as a signed int. I fix this by passing an rpc_authflavor_t pointer around, and returning signed integers from functions. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 29 3月, 2011 1 次提交
-
-
由 Dave Chinner 提交于
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥ If we are already holding the i_lock, we have a reference to the inode so we can safely use ihold() to gain an extra reference. This avoids hangs due to lock recursion on the i_lock now that the inode_lock is gone and igrab() uses the i_lock itself. Signed-off-by: NDave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 3月, 2011 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Now that the inode scalability patches have been merged, it is no longer safe to call igrab() under the inode->i_lock. Now that we no longer call nfs_clear_request() until the nfs_page is being freed, we know that we are always holding a reference to the nfs_open_context, which again holds a reference to the path, and so the inode cannot be freed until the last nfs_page has been removed from the radix tree and freed. We can therefore skip the igrab()/iput() altogether. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 3月, 2011 8 次提交
-
-
由 Weston Andros Adamson 提交于
changes LAYOUTGET and GETDEVICEINFO XDR parsing to: - not use vmap, which doesn't work on incoherent archs - use xdr_stream parsing for all xdr Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Test NFS_INO_LAYOUTCOMMIT before kzalloc Mark inode dirty to retry LAYOUTCOMMIT on kzalloc failure. Add comments. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
When sec=<something> is not presented as a mount option, we should attempt to determine what security flavor the server is using. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
A submount may use different security than the parent mount does. We should figure out what sec flavor the submount uses at mount time. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch adds the nfs4 operation secinfo as a valid nfs rpc operation. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
A later patch will need to perform a lookup using an alternate client with a different security flavor. This patch adds support for doing that on NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch changes nfs4_call_sync() from a macro into a static inline function. As a macro, the call_sync() function will not do any type checking and depends on the sequence arguments always having the same name. As a function, we get to have type checking and can rename the arguments if we so choose. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 3月, 2011 1 次提交
-
-
由 Fred Isaman 提交于
Now that all the infrastructure is in place, we will do the right thing if we remove this special casing. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-