Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 1月, 2018 2 次提交
    • G
      powerpc/powernv: Add ppc_pci_reset_phbs parameter to issue a PHB reset · 45baee14
      由 Guilherme G. Piccoli 提交于 
      During a kdump kernel boot in PowerPC, we request a reset of the PHBs
to the FW. It makes sense, since if we are booting a kdump kernel it
means we had some trouble before and we cannot rely in the adapters'
health; they could be in a bad state, hence the reset is needed.

But this reset is useful not only in kdump - there are situations,
specially when debugging drivers, that we could break an adapter in
a way it requires such reset. One can tell to just go ahead and
reboot the machine, but happens that many times doing kexec is much
faster, and so preferable than a full power cycle.

This patch adds the ppc_pci_reset_phbs parameter to perform such reset.
Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      45baee14
    • R
      powerpc: Use octal numbers for file permissions · 57ad583f
      由 Russell Currey 提交于 
      Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret.  Replace macros for the basic permission
flags (user/group/other read/write/execute) with numeric constants
instead, across the whole powerpc tree.

Introducing a significant number of changes across the tree for no runtime
benefit isn't exactly desirable, but so long as these macros are still
used in the tree people will keep sending patches that add them.  Not only
are they hard to parse at a glance, there are multiple ways of coming to
the same value (as you can see with 0444 and 0644 in this patch) which
hurts readability.
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Reviewed-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      57ad583f
  3. 20 1月, 2018 1 次提交
  5. 19 1月, 2018 1 次提交
    • A
      powerpc/powernv: Add debugfs interface for imc-mode and imc-command · 684d9840
      由 Anju T Sudhakar 提交于 
      In memory Collection (IMC) counter pmu driver controls the ucode's
execution state. At the system boot, IMC perf driver pause the ucode.
Ucode state is changed to "running" only when any of the nest units
are monitored or profiled using perf tool.

Nest units support only limited set of hardware counters and ucode is
always programmed in the "production mode" ("accumulation") mode. This
mode is configured to provide key performance metric data for most of
the nest units.

But ucode also supports other modes which would be used for "debug" to
drill down specific nest units. That is, ucode when switched to
"powerbus" debug mode (for example), will dynamically reconfigure the
nest counters to target only "powerbus" related events in the hardware
counters. This allows the IMC nest unit to focus on powerbus related
transactions in the system in more detail. At this point, production
mode events may or may not be counted.

IMC nest counters has both in-band (ucode access) and out of band
access to it. Since not all nest counter configurations are supported
by ucode, out of band tools are used to characterize other nest
counter configurations.

Patch provides an interface via "debugfs" to enable the switching of
ucode modes in the system. To switch ucode mode, one has to first
pause the microcode (imc_cmd), and then write the target mode value to
the "imc_mode" file.

Proposed Approach:

In the proposed approach, the function (export_imc_mode_and_cmd) which
creates the debugfs interface for imc mode and command is implemented
in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer
base address for each chip.

The interface to expose imc mode and command is required only if we
have nest pmu units registered. Employing the existing data structures
to track whether we have any nest units registered will require to
extend data from perf side to opal-imc.c. Instead an integer is
introduced to hold that information by counting successful nest unit
registration. Debugfs interface is removed based on the integer count.

Example for the interface:

  $ ls /sys/kernel/debug/imc
  imc_cmd_0  imc_cmd_8  imc_mode_0  imc_mode_8
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      684d9840
  7. 16 1月, 2018 1 次提交
    • B
      powernv/kdump: Fix cases where the kdump kernel can get HMI's · 4145f358
      由 Balbir Singh 提交于 
      Certain HMI's such as malfunction error propagate through
all threads/core on the system. If a thread was offline
prior to us crashing the system and jumping to the kdump
kernel, bad things happen when it wakes up due to an HMI
in the kdump kernel.

There are several possible ways to solve this problem

1. Put the offline cores in a state such that they are
not woken up for machine check and HMI errors. This
does not work, since we might need to wake up offline
threads to handle TB errors
2. Ignore HMI errors, setup HMEER to mask HMI errors,
but this still leads the window open for any MCEs
and masking them for the duration of the dump might
be a concern
3. Wake up offline CPUs, as in send them to
crash_ipi_callback (not wake them up as in mark them
online as seen by the hotplug). kexec does a
wake_online_cpus() call, this patch does something
similar, but instead sends an IPI and forces them to
crash_ipi_callback()

This patch takes approach #3.

Care is taken to enable this only for powenv platforms
via crash_wake_offline (a global value set at setup
time). The crash code sends out IPI's to all CPU's
which then move to crash_ipi_callback and kexec_smp_wait().
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      4145f358
  9. 10 1月, 2018 1 次提交
  11. 11 12月, 2017 2 次提交
  13. 04 12月, 2017 1 次提交
  15. 22 11月, 2017 2 次提交
  17. 21 11月, 2017 1 次提交
  19. 13 11月, 2017 2 次提交
  21. 12 11月, 2017 14 次提交
  23. 07 11月, 2017 2 次提交
  25. 06 11月, 2017 8 次提交
    • C
      powerpc/powernv: Add OPAL_BUSY to opal_error_code() · 77adbd22
      由 Cyril Bur 提交于 
      Also export opal_error_code() so that it can be used in modules
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      77adbd22
    • C
      powerpc/opal: Add opal_async_wait_response_interruptible() to opal-async · 9aab2449
      由 Cyril Bur 提交于 
      This patch adds an _interruptible version of opal_async_wait_response().
This is useful when a long running OPAL call is performed on behalf of
a userspace thread, for example, the opal_flash_{read,write,erase}
functions performed by the powernv-flash MTD driver.

It is foreseeable that these functions would take upwards of two
minutes causing the wait_event() to block long enough to cause hung
task warnings. Furthermore, wait_event_interruptible() is preferable
as otherwise there is no way for signals to stop the process which is
going to be confusing in userspace.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      9aab2449
    • S
      powernv/opal-sensor: remove not needed lock · 95e1bc1d
      由 Stewart Smith 提交于 
      Parallel sensor reads could run out of async tokens due to
opal_get_sensor_data grabbing tokens but then doing the sensor
read behind a mutex, essentially serializing the (possibly
asynchronous and relatively slow) sensor read.

It turns out that the mutex isn't needed at all, not only
should the OPAL interface allow concurrent reads, the implementation
is certainly safe for that, and if any sensor we were reading
from somewhere isn't, doing the mutual exclusion in the kernel
is the wrong place to do it, OPAL should be doing it for the kernel.

So, remove the mutex.

Additionally, we shouldn't be printing out an error when we don't
get a token as the only way this should happen is if we've been
interrupted in down_interruptible() on the semaphore.
Reported-by: NRobert Lippert <rlippert@google.com>
Signed-off-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      95e1bc1d
    • C
      powerpc/opal: Rework the opal-async interface · 86cd6d98
      由 Cyril Bur 提交于 
      Future work will add an opal_async_wait_response_interruptible()
which will call wait_event_interruptible(). This work requires extra
token state to be tracked as wait_event_interruptible() can return and
the caller could release the token before OPAL responds.

Currently token state is tracked with two bitfields which are 64 bits
big but may not need to be as OPAL informs Linux how many async tokens
there are. It also uses an array indexed by token to store response
messages for each token.

The bitfields make it difficult to add more state and also provide a
hard maximum as to how many tokens there can be - it is possible that
OPAL will inform Linux that there are more than 64 tokens.

Rather than add a bitfield to track the extra state, rework the
internals slightly.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
[mpe: Fix __opal_async_get_token() when no tokens are free]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      86cd6d98
    • C
      powerpc/opal: Make __opal_async_{get, release}_token() static · 59cf9a1c
      由 Cyril Bur 提交于 
      There are no callers of both __opal_async_get_token() and
__opal_async_release_token().

This patch also removes the possibility of "emergency through
synchronous call to __opal_async_get_token()" as such it makes more
sense to initialise opal_sync_sem for the maximum number of async
tokens.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      59cf9a1c
    • W
      powerpc/opal: Fix EBUSY bug in acquiring tokens · 71e24d77
      由 William A. Kennington III 提交于 
      The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.

This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.

Fixes: 8d724823 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: NWilliam A. Kennington III <wak@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      71e24d77
    • A
      powerpc/powernv: Reserve a hole which appears after enabling IOV · d6f934fd
      由 Alexey Kardashevskiy 提交于 
      In order to make generic IOV code work, the physical function IOV BAR
should start from offset of the first VF. Since M64 segments share
PE number space across PHB, and some PEs may be in use at the time
when IOV is enabled, the existing code shifts the IOV BAR to the index
of the first PE/VF. This creates a hole in IOMEM space which can be
potentially taken by some other device.

This reserves a temporary hole on a parent and releases it when IOV is
disabled; the temporary resources are stored in pci_dn to avoid
kmalloc/free.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      d6f934fd
    • N
      powerpc/powernv: Use FIXUP_ENDIAN_HV in OPAL return · 63c9d8a4
      由 Nicholas Piggin 提交于 
      Close the recoverability gap for OPAL calls by using FIXUP_ENDIAN_HV
in the return path.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      63c9d8a4
  27. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  29. 25 10月, 2017 1 次提交
    • M
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns... · 6aa7de05
      由 Mark Rutland 提交于 
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6aa7de05