- 07 2月, 2008 40 次提交
-
-
由 Christoph Hellwig 提交于
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an xfs_dinode that embedds a xfs_dinode_core one will have to do endian swapping while the other doesn't. Instead of having the current mess with the CFORK macros that have byteswapping and non-byteswapping version (which are inconsistantly named while we're at it) just define each family of the macros to stand by itself and simplify the whole matter. A few direct references to the CFORK variants were cleaned up to use IFORK or DFORK to make this possible. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30163a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
There is no need to lock any page in xfs_buf.c because we operate on our own address_space and all locking is covered by the buffer semaphore. If we ever switch back to main blockdeive address_space as suggested e.g. for fsblock with a similar scheme the locking will have to be totally revised anyway because the current scheme is neither correct nor coherent with itself. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30156a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Robert P. J. Day 提交于
SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30098a Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Tim Shimmin 提交于
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE where appropriate. Initial patch and motivation from Nicolas Kaiser. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30096a Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Niv Sardi 提交于
This assert is bogus. We can have a forced shutdown occur between the check for the XLOG_FORCED_SHUTDOWN and the ASSERT. Also, the logging system shouldn't care about the state of XFS_FORCED_SHUTDOWN, it should only check XLOG_FORCED_SHUTDOWN. The logging system has it's own forced shutdown flag so, for the case of a forced shutdown that's not due to a logging error, we can flush the log. SGI-PV: 972985 SGI-Modid: xfs-linux-melb:xfs-kern:30029a Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Eric Sandeen 提交于
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if CONFIG_XFS_RT is off. This should be safe because mount checks in xfs_rtmount_init: so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be encountered after that. Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space, presumeably gcc can optimize around the various "if (0)" type checks: xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8 xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8 <-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4 xfs_qm_vop_chown_reserve -4 SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30014a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Mount option parsing is platform specific. Move it out of core code into the platform specific superblock operation file. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30012a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Implement the new generic callout for file preallocation. Atomically change the file size if requested. SGI-PV: 972756 SGI-Modid: xfs-linux-melb:xfs-kern:30009a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
The log force added in xfs_iget_core() has been a performance issue since it was introduced for tight loops that allocate then unlink a single file. under heavy writeback, this can introduce unnecessary latency due tothe log I/o getting stuck behind bulk data writes. Fix this latency problem by avoinding the need for the log force by moving the place we mark linux inode dirty to the transaction commit rather than on transaction completion. This also closes a potential hole in the sync code where a linux inode is not dirty between the time it is modified and the time the log buffer has been written to disk. SGI-PV: 972753 SGI-Modid: xfs-linux-melb:xfs-kern:30007a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Prevent transaction overrun in xfs_iomap_write_allocate() if we race with a truncate that overlaps the delalloc range we were planning to allocate. If we race, we may allocate into a hole and that requires block allocation. At this point in time we don't have a reservation for block allocation (apart from metadata blocks) and so allocating into a hole rather than a delalloc region results in overflowing the transaction block reservation. Fix it by only allowing a single extent to be allocated at a time. SGI-PV: 972757 SGI-Modid: xfs-linux-melb:xfs-kern:30005a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
There are several mount options that don't show up in /proc/mounts. Add them in and clean up the showargs code at the same time. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30004a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Sparse trips over the locking order in xlog_recover_do_efd_trans() when xfs_trans_delete_ail() drops the ail lock. Because the unlock is conditional, we need to either annotate with a "fake unlock" or change the structure of the code so sparse thinks the function always unlocks. Reordering the code makes it simpler, so do that. SGI-PV: 972755 SGI-Modid: xfs-linux-melb:xfs-kern:30003a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
These are mostly locking annotations, marking things static, casts where needed and declaring stuff in header files. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30002a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Patch inspired by Andi Kleen. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30000a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Vlad Apostolov 提交于
We need xfs_bulkstat() to report inode stat for inodes with link count zero but reference count non zero. The fix here: http://oss.sgi.com/archives/xfs/2007-09/msg00266.html changed this behavior and made xfs_bulkstat() to filter all unlinked inodes including those that are not destroyed yet but held by reference. The attached patch returns back to the original behavior by marking the on-disk inode buffer "dirty" when di_mode is cleared (at that time both inode link and reference counter are zero). SGI-PV: 972004 SGI-Modid: xfs-linux-melb:xfs-kern:29914a Signed-off-by: NVlad Apostolov <vapo@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
SGI-PV: 971596 SGI-Modid: xfs-linux-melb:xfs-kern:29902a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Eric Sandeen 提交于
XFS_IOC_GETVERSION, XFS_IOC_GETXFLAGS and XFS_IOC_SETXFLAGS all take a "long" which changes size between 32 and 64 bit platforms. So, the ioctl cmds that come in from a 32-bit app aren't as expected, for example on GETXFLAGS, unknown cmd fd(3) cmd(80046601){t:'f';sz:4} due to the size mismatch. So, use instead the 32-bit version of the commands for compat ioctls, and other than that it doesn't take any more manipulation. Also, for both native and compat versions, just define them to the values as defined in fs.h SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29849a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
No need for xfs to have its own hex dumping routine now that the kernel has one. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29847a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
This macro is unused an all other acros in this family operate on native types, so we most likely won't grow a user either. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29846a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
There is no need to lock any page in xfs_buf.c because we operate on our own address_space and all locking is covered by the buffer semaphore. If we ever switch back to main blockdeive address_space as suggested e.g. for fsblock with a similar scheme the locking will have to be totally revised anyway because the current scheme is neither correct nor coherent with itself. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29845a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Refactoring xfs_mountfs() to call sub-functions for logical chunks can help save a bit of stack, and can make it easier to read this long function. The mount path is one of the longest common callchains, easily getting to within a few bytes of the end of a 4k stack when over lvm, quotas are enabled, and quotacheck must be done. With this change on top of the other stack-related changes I've sent, I can get xfs to survive a normal xfsqa run on 4k stacks over lvm. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29834a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Mostly trivial conversion with one exceptions: h_num_logops was kept in native endian previously and only converted to big endian in xlog_sync, but we always keep it big endian now. With todays cpus fast byteswap instructions that's not an issue but the new variant keeps the code clean and maintainable. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29821a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- the various assign lsn macros are replaced by a single inline, xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except for a more sane calling convention. ASSIGN_LSN_DISK is replaced by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same, except we pass the cycle and block arguments explicitly instead of a log paramter. The latter two variants only had 2, respectively one user anyway. - the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the same calling conventions. - GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away the unused arch argument. Instead of conditional defintions depending on host endianess we now do an unconditional swap and shift then, which generates equal code. - the unused XLOG_SET macro is removed. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29820a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
- the various assign lsn macros are replaced by a single inline, xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except for a more sane calling convention. ASSIGN_LSN_DISK is replaced by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same, except we pass the cycle and block arguments explicitly instead of a log paramter. The latter two variants only had 2, respectively one user anyway. - the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the same calling conventions. - GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away the unused arch argument. Instead of conditional defintions depending on host endianess we now do an unconditional swap and shift then, which generates equal code. - the unused XLOG_SET macro is removed. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29819a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
No need to have a wrapper just two call two more functions. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29816a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode where apropinquate. And kill some useless helpers while we're at it. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29808a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
xfs_ioctl.c passes around vnode pointers quite a lot, but all places already have the Linux inode which is identical to the vnode these days. Clean the code up to always use the Linux inode. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29807a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
We were already filling the Linux struct statfs anyway, and doing this trivial task directly in xfs_fs_statfs makes the code quite a bit cleaner. While I was at it I also moved copying attributes that don't change over the lifetime of the filesystem outside the superblock lock. xfs_fs_fill_super used to get the magic number and blocksize through xfs_statvfs, but assigning them directly is a lot cleaner and will save some stack space during mount. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:29802a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
Just fill in struct kstat directly from the xfs_inode instead of doing a detour through a bhv_vattr_t and xfs_getattr. SGI-PV: 970980 SGI-Modid: xfs-linux-melb:xfs-kern:29770a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it just duplicates fields already in xfs_inode, and there is nothing this abstraction buys us on XFS/Linux. This patch removes it and shrinks source and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44 bytes in debug/non-debug builds. SGI-PV: 970852 SGI-Modid: xfs-linux-melb:xfs-kern:29754a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
remove spinlock init abstraction macro in spin.h, remove the callers, and remove the file. Move no-op spinlock_destroy to xfs_linux.h Cleanup spinlock locals in xfs_mount.c SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29751a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Switch last couple lock_t's to spinlock_t's. Remove now-unused spinlock-related macros & types. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29748a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29747a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate XFS_SB_LOCK, remove XFS_SB_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29746a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate mru_lock, remove mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29745a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate dabuf_global_lock, remove mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29744a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate pagb_lock, remove mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29743a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate DQ_PINLOCK, remove DQ_PINLOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29742a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate GRANT_LOCK, remove GRANT_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29741a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Eric Sandeen 提交于
Un-obfuscate LOG_LOCK, remove LOG_LOCK->mutex_lock->spin_lock macros, call spin_lock directly, remove extraneous cookie holdover from old xfs code, and change lock type to spinlock_t. SGI-PV: 970382 SGI-Modid: xfs-linux-melb:xfs-kern:29740a Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-