- 27 6月, 2018 1 次提交
-
-
由 Thor Thayer 提交于
Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: 78cd6a9d ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com> Signed-off-by: NDinh Nguyen <dinguyen@kernel.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 24 6月, 2018 11 次提交
-
-
由 Geert Uytterhoeven 提交于
If CONFIG_SMP=n, building a kernel for R-Car Gen2 fails with: arch/arm/mach-shmobile/setup-rcar-gen2.o: In function `rcar_gen2_timer_init': setup-rcar-gen2.c:(.init.text+0x30): undefined reference to `secure_cntvoff_init' Indeed, on R-Car Gen2 SoCs, secure_cntvoff_init() is not only needed for secondary CPUs, but also for the boot CPU. This is most visible on SoCs with Cortex A7 cores (e.g. R-Car E2, cfr. commit 9ce3fa68 ("ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794")), but Cortex A15 is affected, too. Fix this by always providing secure_cntvoff_init() when building for ARM V7. Reported-by: NArnd Bergmann <arnd@arndb.de> Fixes: 7c607944 ("ARM: smp: Add initialization of CNTVOFF") Fixes: cad160ed ("ARM: shmobile: Convert file to use cntvoff") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NMaxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'socfpga_nand_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes ARM: dts: socfpga: fix NAND support - NAND should be using nand_x_clk, not nand_clk - fix NAND node compatible for Cyclone5 and Arria10 * tag 'socfpga_nand_fix_v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Fix NAND controller node compatible for Arria10 ARM: dts: socfpga: Fix NAND controller node compatible ARM: dts: socfpga: Fix NAND controller clock supply Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'qcom-fixes-for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Fixes for v4.18-rc1 * Fix coresight graph on msm8916 * Disable uart0 on db820c by default * tag 'qcom-fixes-for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8916: fix Coresight ETF graph connections arm64: dts: apq8096-db820c: disable uart0 by default Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'arm-soc/for-4.18/maintainers-arm64-fixes' of https://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM64-based SoCs MAINTAINERS file fixes for 4.18, please pull the following: - Florian fixes the entry for the Northstar2 SoCs which was somehow lost during a directory move. He also adds an entry for the Stingray SoCs which was missing from the day files were added * tag 'arm-soc/for-4.18/maintainers-arm64-fixes' of https://github.com/Broadcom/stblinux: MAINTAINERS: Update Broadcom iProc entry with Stingray MAINAINTERS: Corrected Broadcom Northstar2 entry Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'arm-soc/for-4.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 4.18, please pull the following: - Scott fixes both the bcm958742k and bcm958742t reference boards to have the correct eMMC voltage specified - Ray fixes the I2C and PCIe Device Tree nodes interrupt specifiers for Northstar 2 and Stingray SoCs. * tag 'arm-soc/for-4.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: Stingray: Fix I2C controller interrupt type arm64: dts: ns2: Fix PCIe controller interrupt type arm64: dts: ns2: Fix I2C controller interrupt type arm64: dts: specify 1.8V EMMC capabilities for bcm958742t arm64: dts: specify 1.8V EMMC capabilities for bcm958742k Signed-off-by: NOlof Johansson <olof@lixom.net>
-
https://github.com/Broadcom/stblinux由 Olof Johansson 提交于
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 4.18, please pull the following: - Ray fixes the I2C and PCIe interrupt types for the Cygnus SoC - Florian fixes the I2C and PCIe interrupts for the Northstar (BCM5301x), Northstar Plus and Hurricane 2 SoCs * tag 'arm-soc/for-4.18/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: Cygnus: Fix PCIe controller interrupt type ARM: dts: Cygnus: Fix I2C controller interrupt type ARM: dts: BCM5301x: Fix i2c controller interrupt type ARM: dts: HR2: Fix interrupt types for i2c and PCIe ARM: dts: NSP: Fix PCIe controllers interrupt types ARM: dts: NSP: Fix i2c controller interrupt type Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18: - Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be properly propagated to the upstream interrupt controller. - Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset. The values in Reference Manual are incorrect. - Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that the SPI controller RX FIFO was not empty after a DMA transfer, and the driver gets stuck in the next PIO transfer when reading one word more than expected. * tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix irq for pcie bridge soc: imx: gpcv2: correct PGC offset ARM: dts: imx6q: Use correct SDMA script for SPI5 core Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.18 Make PM domain initialization more robust in Renesas R-Car SYSC driver. This resolves a regression due to re-parenting of PM domains by 086b3999 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}"). * tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Make PM domain initialization more robust Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebu由 Olof Johansson 提交于
mvebu fixes for 4.17 (part 2) - Use correct size for ICU nodes (irq controller) on Armada 7K/8K - Fix "#cooling-cells" property's name on Synology DS116 (Armada 385) * tag 'mvebu-fixes-4.17-2' of git://git.infradead.org/linux-mvebu: arm: dts: armada: Fix "#cooling-cells" property's name arm64: dts: marvell: fix CP110 ICU node size Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 23 6月, 2018 2 次提交
-
-
由 Rob Herring 提交于
The ETF input should be connected to the funnel output, and the ETF output should be connected to the replicator input. The labels are wrong and these got swapped: Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional Fixes: 7c10da37 ("arm64: dts: qcom: Add msm8916 CoreSight components") Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: NRob Herring <robh@kernel.org> Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org> Tested-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Srinivas Kandagatla 提交于
Access to UART0 is disabled by bootloaders. By leaving it enabled by default would reboot the board. Disable this for now, this would alteast give a board which boots. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
- 19 6月, 2018 14 次提交
-
-
由 Oleksij Rempel 提交于
Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de> Fixes: b1d17f68 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Ray Jui 提交于
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Stingray SoC. Fixes: 1256ea18 ("arm64: dts: Add I2C DT nodes for Stingray SoC") Signed-off-by: NRay Jui <ray.jui@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Ray Jui 提交于
Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: fd5e5dd5 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Signed-off-by: NRay Jui <ray.jui@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Ray Jui 提交于
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: 7ac674e8 ("arm64: dts: Add I2C nodes for NS2") Signed-off-by: NRay Jui <ray.jui@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Scott Branden 提交于
Specify 1.8V EMMC capabilities for bcm958742t board to indicate support for UHS mode. Fixes: d4b4aba6 ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: NScott Branden <scott.branden@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Scott Branden 提交于
Specify 1.8V EMMC capabilities for bcm958742k board to indicate support for UHS mode. Fixes: d4b4aba6 ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by: NScott Branden <scott.branden@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Ray Jui 提交于
Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC Fixes: cd590b50 ("ARM: dts: enable PCIe support for Cygnus") Fixes: f6b88935 ("ARM: dts: Enable MSI support for Broadcom Cygnus") Signed-off-by: NRay Jui <ray.jui@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Ray Jui 提交于
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC. Fixes: b51c05a3 ("ARM: dts: add I2C device nodes for Broadcom Cygnus") Signed-off-by: NRay Jui <ray.jui@broadcom.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: bb097e3e ("ARM: dts: BCM5301X: Add I2C support to the DT") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
The i2c and PCIe controllers had an incorrect type which should have been set to IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: b9099ec7 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
The interrupts for the PCIe controllers should all be of type IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: d71eb941 ("ARM: dts: NSP: Add MSI support on PCI") Fixes: 52219902 ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: 0f9f27a3 ("ARM: dts: NSP: Add I2C support to the DT") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
Update the MAINTAINERS file to cover the "stingray" pattern and a few files under arch/arm64/boot/dts/broadcom/* as well as the clock driver and binding. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Florian Fainelli 提交于
While moving the Northstar 2 DTS into a dedicated directory, the corresponding MAINTAINERS file entry was not updated accordingly, fix that. Fixes: 63a913c1 ("arm64: dts: move ns2 into northstar2 directory") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
- 17 6月, 2018 7 次提交
-
-
由 Anson Huang 提交于
Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Fixes: 03aa1262 ("soc: imx: Add GPCv2 power gating driver") Acked-by: NAndrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Sean Nyekjaer 提交于
According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 67794025 ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period
-
git://linuxtv.org/mchehab/experimental由 Linus Torvalds 提交于
Pull documentation fixes from Mauro Carvalho Chehab: "This solves a series of broken links for files under Documentation, and improves a script meant to detect such broken links (see scripts/documentation-file-ref-check). The changes on this series are: - can.rst: fix a footnote reference; - crypto_engine.rst: Fix two parsing warnings; - Fix a lot of broken references to Documentation/*; - improve the scripts/documentation-file-ref-check script, in order to help detecting/fixing broken references, preventing false-positives. After this patch series, only 33 broken references to doc files are detected by scripts/documentation-file-ref-check" * tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits) fix a series of Documentation/ broken file name references Documentation: rstFlatTable.py: fix a broken reference ABI: sysfs-devices-system-cpu: remove a broken reference devicetree: fix a series of wrong file references devicetree: fix name of pinctrl-bindings.txt devicetree: fix some bindings file names MAINTAINERS: fix location of DT npcm files MAINTAINERS: fix location of some display DT bindings kernel-parameters.txt: fix pointers to sound parameters bindings: nvmem/zii: Fix location of nvmem.txt docs: Fix more broken references scripts/documentation-file-ref-check: check tools/*/Documentation scripts/documentation-file-ref-check: get rid of false-positives scripts/documentation-file-ref-check: hint: dash or underline scripts/documentation-file-ref-check: add a fix logic for DT scripts/documentation-file-ref-check: accept more wildcards at filenames scripts/documentation-file-ref-check: fix help message media: max2175: fix location of driver's companion documentation media: v4l: fix broken video4linux docs locations media: dvb: point to the location of the old README.dvb-usb file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull fsnotify updates from Jan Kara: "fsnotify cleanups unifying handling of different watch types. This is the shortened fsnotify series from Amir with the last five patches pulled out. Amir has modified those patches to not change struct inode but obviously it's too late for those to go into this merge window" * tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: add fsnotify_add_inode_mark() wrappers fanotify: generalize fanotify_should_send_event() fsnotify: generalize send_to_group() fsnotify: generalize iteration of marks by object type fsnotify: introduce marks iteration helpers fsnotify: remove redundant arguments to handle_event() fsnotify: use type id to identify connector object type
-
git://github.com/bzolnier/linux由 Linus Torvalds 提交于
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, few small fixes, some cleanups and dead drivers removal: - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen) - add missing module license tags to omap/omapfb driver (Arnd Bergmann) - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd Bergmann) - convert savagefb, aty128fb & radeonfb drivers to use msleep & co. (Jia-Ju Bai) - allow COMPILE_TEST build for viafb driver (media part was reviewed by media subsystem Maintainer) - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm drivers (drm parts were acked by shmob-drm driver Maintainer) - remove unused auo_k190xfb drivers - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy Shevchenko, Colin Ian King)" * tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits) fb_omap2: add gpiolib dependency video/omap: add module license tags MAINTAINERS: make omapfb orphan video: fbdev: pxafb: match_string() conversion fixup video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling" video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer" video: fbdev: pxafb: Convert to use match_string() helper video: fbdev: via: allow COMPILE_TEST build video: fbdev: remove unused sh_mobile_meram driver drm: shmobile: remove unused MERAM support video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support video: fbdev: remove unused auo_k190xfb drivers video: omap: Improve a size determination in omapfb_do_probe() video: sm501fb: Improve a size determination in sm501fb_probe() video: fbdev-MMP: Improve a size determination in path_init() video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe() video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe() video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency ...
-
- 16 6月, 2018 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull compat updates from Al Viro: "Some biarch patches - getting rid of assorted (mis)uses of compat_alloc_user_space(). Not much in that area this cycle..." * 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: simplify compat ioctl handling signalfd: lift sigmask copyin and size checks to callers of do_signalfd4() vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull aio fixes from Al Viro: "Assorted AIO followups and fixes" * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: eventpoll: switch to ->poll_mask aio: only return events requested in poll_mask() for IOCB_CMD_POLL eventfd: only return events requested in poll_mask() aio: mark __aio_sigset::sigmask const
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull module updates from Jessica Yu: "Minor code cleanup and also allow sig_enforce param to be shown in sysfs with CONFIG_MODULE_SIG_FORCE" * tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Allow to always show the status of modsign module: Do not access sig_enforce directly
-