- 05 4月, 2017 20 次提交
-
-
由 Andrey Vagin 提交于
cb_running is reported in /proc/self/net/netlink and it is reported by the ss tool, when it gets information from the proc files. sock_diag is a new interface which is used instead of proc files, so it looks reasonable that this interface has to report no less information about sockets than proc files. We use these flags to dump and restore netlink sockets. Signed-off-by: NAndrei Vagin <avagin@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We should be returning -ENOMEM if qed_mcp_cmd_add_elem() fails. The current code returns success. Fixes: 4ed1eea8 ("qed: Revise MFW command locking") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NTomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We accidentally left this dead code behind after commit 5952fde1 ("net: sched: choke: remove dead filter classify code"). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
There is a cut and paste bug here so we accidentally clear the first few bytes of "resp" a second time instead clearing "ctx". Fixes: 50c0add5 ("liquidio: refactor interrupt moderation code") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
In hardware configurations where multiple queues are active, the rx queue needs to be mapped into a dma channel, even if a single rx queue is used. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Add all the currently available SPEED_<foo> strings. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Updates for net-next. Main changes are to add WoL and selftest features, optimize XDP_TX by using short BDs, and to cap the usage of MSIX. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The current code enables up to the maximum MSIX vectors in the PCIE config space without considering the max completion rings available. An MSIX vector is only useful when it has an associated completion ring, so it is better to cap it. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
No offload is performed on the XDP_TX ring so we can use the short TX BDs. This has the effect of doubling the size of the XDP TX ring so that it now matches the size of the rx ring by default. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
It is necessary to disable autoneg before enabling PHY loopback, otherwise link won't come up. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The mac loopback self test operates in polling mode. To support that, we need to add functions to open and close the NIC half way. The half open mode allows the rings to operate without IRQ and NAPI. We use the XDP transmit function to send the loopback packet. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add the basic infrastructure and only firmware tests initially. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add suspend/resume callbacks using the newer dev_pm_ops method. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
And add functions to set and free magic packet filter. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add pci shutdown method to put device in the proper WoL and power state. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to driver probe function to check if the device is WoL capable and if Magic packet WoL filter is currently set. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Features added include WoL and selftest. Signed-off-by: NDeepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2017-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.11 iwlwifi * an RCU fix * a fix for a potential out-of-bounds access crash * a fix for IBSS which has been broken since DQA was enabled rtlwifi * fix scheduling while atomic regression brcmfmac * fix use-after-free bug found by KASAN ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2017 20 次提交
-
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== qed: QM & ILT changes This series introduces several changes and improvements to existing queue manager and ILT configurations done during initialization. Notice some of the patches are actually future fixes, I.e., bugs that can't be triggered with exisiting driver but are needed for some future functionality. Patch #1 refactors the configuration of the hardware's queue manager, which is quite messy today. This contains most of the bulk [code-wise] in the series. Patch #2, #3 fix Timers related ILT configurations that are yet to affect qed in existing scenarios. Patch #4 reduces needless ILT lines wasted for RoCE configurations. Patch #5 allows RoCE partitions to manage with less memory regions [important, e.g., for Multi-function parititions with RoCE support]. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
It's possible some configurations would prevent driver from utilizing all the Memory Regions due to a lack of ILT lines. In such a case, calculate how many memory regions would have to be dropped due to limit, and manage without those. Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
As RoCE doesn't need to use the SRC, allocating ILT memory on behalf of RoCE is wasting available ILT lines. Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
As of today there's no protocol supported that requires support from the TM hardware block and enables SRIOV, but we should still correct the calculation to reflect the lines required for such future VFs instead of changing the PF's own lines. Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kalderon 提交于
When configuring the HW timers block we should set the number of CIDs up until the last CID that require timers, instead of only those CIDs whose protocol needs timers support. Today, the protocols that require HW timers' support have their CIDs before any other protocol, but that would change in future [when we add iWARP support]. Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
Refactor and clean up the queue manager initialization logic. Also, this adds support for RoC low latency queues, which later would be used for improving RoCE latency in high throughput scenarios. Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Ungerer 提交于
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Number of sockets is limited by 16-bit, so 64-bit allocation will never happen. 16-bit ops are the worst code density-wise on x86_64 because of additional prefix (66). Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta reuseport_add_sock 539 536 -3 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Make ->hash_count, ->low_watermark and ->high_watermark unsigned int and propagate unsignedness to other variables. This change doesn't change code generation because these fields aren't used in 64-bit contexts but make it anyway: these fields can't be negative numbers. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Hash size can't negative so "unsigned int" is logically correct. Propagate "unsigned int" to loop counters. Space savings: add/remove: 0/0 grow/shrink: 2/2 up/down: 6/-18 (-12) function old new delta flow_cache_flush_tasklet 362 365 +3 __flow_cache_shrink 333 336 +3 flow_cache_cpu_up_prep 178 171 -7 flow_cache_lookup 1159 1148 -11 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Flow keys aren't 4GB+ numbers so 64-bit arithmetic is excessive. Space savings (I'm not sure what CSWTCH is): add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-48 (-48) function old new delta flow_cache_lookup 1163 1159 -4 CSWTCH 75997 75953 -44 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Breaking the include loop netdevice.h, dsa.h, devlink.h broke this driver, it depends on includes brought in by these headers. Adding linux/of.h fixes it. Fixes: ed0e39e97d34 ("net: break include loop netdevice.h, dsa.h, devlink.h") Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Bernat 提交于
When an incoming frame is tagged or when GRO is disabled, the skb handled to vxlan_xmit() doesn't contain a valid transport header offset. This makes ND proxying fail. We combine two changes: replace use of skb_transport_offset() and ensure the necessary amount of skb is linear just before using it: - In vxlan_xmit(), when determining if we have an ICMPv6 neighbor discovery packet, just check if it is an ICMPv6 packet and rely on neigh_reduce() to do more checks if this is the case. The use of pskb_may_pull() is replaced by skb_header_pointer() for just the IPv6 header. - In neigh_reduce(), add pskb_may_pull() for IPv6 header and neighbor discovery message since this was removed from vxlan_xmit(). Replace skb_transport_header() with ipv6_hdr() + 1. - In vxlan_na_create(), replace first skb_transport_offset() with ipv6_hdr() + 1 and second with skb_network_offset() + sizeof(struct ipv6hdr). Additionally, ensure we pskb_may_pull() the whole skb as we need it to iterate over the options. Signed-off-by: NVincent Bernat <vincent@bernat.im> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Before when implementing sctp prsctp, SCTP_PR_STREAM_STATUS wasn't added, as it needs to save abandoned_(un)sent for every stream. After sctp stream reconf is added in sctp, assoc has structure sctp_stream_out to save per stream info. This patch is to add SCTP_PR_STREAM_STATUS by putting the prsctp per stream statistics into sctp_stream_out. v1->v2: fix an indent issue. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Salil Mehta says: ==================== net: hns: Misc. HNS Bug Fixes & Code Improvements This patch set introduces various HNS bug fixes, optimizations and code improvements. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Salil 提交于
This patch fixes some checkpatch.pl script caught errors and warnings during the compilation time. Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 lipeng 提交于
There is a bug on Hip06 that tx ring interrupts packets count will be clear when drivers send data to tx ring, so that the tx packets count will never upgrade to packets line, and cause the interrupts engendered was delayed. Sometimes, it will cause sending performance lower than expected. To fix this bug, we set tx ring interrupts packets line to 1 forever, to avoid count clear. And set the gap time to 20us, to solve the problem that too many interrupts engendered when packets line is 1. This patch could advance the send performance on ARM from 6.6G to 9.37G when an iperf send thread on ARM and an iperf send thread on X86 for XGE. Signed-off-by: Nlipeng <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kejian Yan 提交于
HNS needs SMB Buffers to store at least two packets after sending pause frame because of the link delay. The MTU of HNS is 9728. As the processor user manual described, the SBM buffer threshold should be modified. Reported-by: NPing Zhang <zhangping5@huawei.com> Signed-off-by: NKejian Yan <yankejian@huawei.com> Reviewed-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kejian Yan 提交于
We need to free all ppe submodule if it fails to initialize ppe by any fault, so this patch will free all ppe resource before hns_ppe_init() returns exception situation Reported-by: NJinchuanTian <tianjinchuan1@huawei.com> Signed-off-by: NKejian Yan <yankejian@huawei.com> Reviewed-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kejian Yan 提交于
This patch fixes the code to clear pclint warning/info. Reported-by: NPing Zhang <zhangping5@huawei.com> Signed-off-by: NKejian Yan <yankejian@huawei.com> Reviewed-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-