Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.
V2: clean up hdp reset ras error count function.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

replace navi10 ih block with vega20 ih block for
vega20 and arcturus
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ROM clock gating enable/disable is not supported
on APU platform. (i.e. CGTT_ROM_CLK_CTRL0 register
is not availabe on APU). SMUIO callbacks will check
APU flag before enable/disable rom clock gating, and
skip the programming. Accordingly, query clock gating
status through CGTT_ROM_CLK_CTRL0 also doesn't support
on APU platform.

The change applies to RAVEN/RAVEN2/PICASSO/RENOIR.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Switch to smuio callbacks: use smuio v9_0 callbacks
for Vega10/12, smuio v11_0 callbacks for Vega20/Arcturus.
APUs don't support enable/disable rom clock gating and
also don't support read bios from rom. So APU flag check
is needed in clock gating callbacks and asic funciton
for read bios from rom to prevent access unknown offset
on APU.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds common ip support for green_sardine.

v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Concurrent operation of VCN and JPEG decoder in DPG mode is
causing ring timeout due to power state.
Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. The patch covers various .c files for this driver.
Issue reported by checkpatch script.
Signed-off-by: NDeepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Vega20 and Arcturus asics use oss 5.0 version.

[How]
Replace ih ip block by navi10 for vega20 and arcturus.
Signed-off-by: NAlex Sierra <alex.sierra@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Concurrent operation of VCN and JPEG decoder in DPG mode is
causing ring timeout due to power state.
Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.

Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.

Fixes: c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: NDirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds common ip support for green_sardine.

v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
introduced a NULL pointer dereference when booting with
amdgpu.discovery=0, because it removed the call of vega10_reg_base_init()
for that case.

Fix this by calling that funcion if amdgpu_discovery == 0 in addition to
the case that amdgpu_discovery_reg_base_init() failed.

Fixes: c1cf79ca ("drm/amdgpu: use IP discovery table for renoir")
Signed-off-by: NDirk Gouders <dirk@gouders.net>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Switch WREG32/RREG32_PCIE to use indirect reg access
helper for soc15 and onwards
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cache the PCI state on boot and before each case where we might
loose it.

v2: Add pci_restore_state while caching the PCI state to avoid
breaking PCI core logic for stuff like suspend/resume.

v3: Extract pci_restore_state from amdgpu_device_cache_pci_state
to avoid superflous restores during GPU resets and suspend/resumes.

v4: Style fixes.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to restore some registers prior to running asic
init to work around a firmware bug.
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enabe HDP SD/DS clock gatting in Renoir series.
Signed-off-by: NPrike.Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When we reset the GPU, note what type of reset will be
used.  This makes debugging different reset scenarios
more clear as the driver may use different reset
methods depending on conditions on the system.
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Default value is auto, doesn't change
original reset method logic.

v2: change to use parameter reset_method
v3: add warn msg if specified mode isn't supported
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Init soc15 reg base early enough so we can touch
mailbox related registers in request full access
for sriov before set_ip_blocks, vi&nv arch doesn't
use reg base in virt ops.

v2: fix reg_base_init missed in bare metal case.
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move request init data to virt detection func, so we
can insert request full access between request init data
and set ip blocks.
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The failed case is no SDMA1 IP for Renoir discovery table while in accessing SDMA1 reg base,
thus need have nullptr test for soc15_read_register invoked in MMR addres space inquire opt.
Signed-off-by: NPrike.Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than relying on gpu info firmware.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add some APU flags to simplify handling of different APU
variants.  It's easier to understand the special cases
if we use names flags rather than checking device ids and
silicon revisions.

v2: rebase on latest code
Acked-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Vram lost counter is wrongly increased by two during baco reset.

V2: assumed vram lost for mode1 reset on all ASICs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Vram lost counter is wrongly increased by two during baco reset.

V2: assumed vram lost for mode1 reset on all ASICs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable VCN2.5 DPG mode for arcturus after below items are applied.
ASD: 0x21000023
SOS: 0x17003B
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
VBIOS: 23
Signed-off-by: NJames Zhu <James.Zhu@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

we need to move virt detection much earlier because:
1) HW team confirms us that RCC_IOV_FUNC_IDENTIFIER will always
be at DE5 (dw) mmio offset from vega10, this way there is no
need to implement detect_hw_virt() routine in each nbio/chip file.
for VI SRIOV chip (tonga & fiji), the BIF_IOV_FUNC_IDENTIFIER is at
0x1503

2) we need to acknowledged we are SRIOV VF before we do IP discovery because
the IP discovery content will be updated by host everytime after it recieved
a new coming "REQ_GPU_INIT_DATA" request from guest (there will be patches
for this new handshake soon).
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NEmily Deng <Emily.Deng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The ROMC_INDEX/DATA offset was changed to e4/e5 since
from smuio_v11 (vega20/arcturus).
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Tested-by: NCandice Li <Candice.Li@amd.com>
Reviewed-by: NCandice Li <Candice.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The ROMC_INDEX/DATA offset was changed to e4/e5 since
from smuio_v11 (vega20/arcturus).
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Tested-by: NCandice Li <Candice.Li@amd.com>
Reviewed-by: NCandice Li <Candice.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HDP ras error counters are dirty ones after cold reboot
Read operation is needed to reset them to 0
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's 25 Mhz (refclk / 4).  This fixes the interpretation
of the rlc clock counter.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It's 25 Mhz (refclk / 4).  This fixes the interpretation
of the rlc clock counter.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So don't use it.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better clean that up before some automation starts to complain about it
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The only data fabric information the adev struct currently
contains is a function pointer table. In the near future,
we will be adding some cached DF information into adev. As
such, this patch creates a new amdgpu_df struct for adev.
Right now, it only containst the old function pointer table,
but new stuff will be added soon.
Signed-off-by: NJoseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With default PSP FW loading
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.

V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Before, initialization of smu ip block would be skipped
for sriov ASICs. But if there's only one VF being used,
guest driver should be able to dump some HW info such as
clks, temperature,etc.

To solve this, now after onevf mode is enabled, host
driver will notify guest. If it's onevf mode, guest will
do smu hw_init and skip some steps in normal smu hw_init
flow because host driver has already done it for smu.

With this fix, guest app can talk with smu and dump hw
information from smu.

v2: refine the logic for pm_enabled.Skip hw_init by not
changing pm_enabled.
v3: refine is_support_sw_smu and fix some indentation
issue.
Signed-off-by: NJack Zhang <Jack.Zhang1@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is used to determine whether runtime pm can be
supported or not.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v1: compared to bare-metal: sriov support psp loading VCN firmware; only one
encoding ring would be used in each instance.
v2: keep unchange for bare-metal VCN2.5 hw_init, just add a flag with sriov
and also remove multiple lines.
v3: squash in warning fix
Signed-off-by: NJane Jian <Jane.Jian@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>