- 01 8月, 2006 1 次提交
-
-
由 Anton Blanchard 提交于
Our pseries hcall interfaces are out of control: plpar_hcall_norets plpar_hcall plpar_hcall_8arg_2ret plpar_hcall_4out plpar_hcall_7arg_7ret plpar_hcall_9arg_9ret Create 3 interfaces to cover all cases: plpar_hcall_norets: 7 arguments no returns plpar_hcall: 6 arguments 4 returns plpar_hcall9: 9 arguments 9 returns There are only 2 cases in the kernel that need plpar_hcall9, hopefully we can keep it that way. Pass in a buffer to stash return parameters so we avoid the &dummy1, &dummy2 madness. Signed-off-by: NAnton Blanchard <anton@samba.org> -- Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 31 7月, 2006 1 次提交
-
-
由 Jeremy Kerr 提交于
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. pseries platform changes. Built for pseries_defconfig Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 28 6月, 2006 1 次提交
-
-
由 Michael Ellerman 提交于
Initialise the ppc_md htab callbacks earlier, in the probe routines. This allows us to call htab_finish_init() from htab_initialize(), and makes it private to hash_utils_64.c. Move htab_finish_init() and make_bl() above htab_initialize() to avoid forward declarations. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 01 4月, 2006 2 次提交
-
-
由 Heiko J Schick 提交于
This extends the HCALL interface for InfiniBand usage. I've made the patch against the linux-2.6 git tree and Segher's patch: [PATCH] Change H_StudlyCaps to H_SHOUTING_CAPS We moved this into the common powerpc code based on comments we got after posting the first eHCA InfiniBand device driver patch. Signed-off-by: NHeiko j Schick <schickhj@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
Also cleans up some nearby whitespace problems. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 1月, 2006 1 次提交
-
-
由 David Gibson 提交于
At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2006 3 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 12月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Some debug code wasn't properly removed from the initial 64k pages patch, and while it's harmless, it's also slowing down significantly a very hot code path, thus it should really be removed. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 11月, 2005 3 次提交
-
-
由 Paul Mackerras 提交于
Mostly this involves adding #include <asm/smp.h>, since that defines things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which are SMP-related but still needed on UP. This incorporates fixes posted by Olof Johansson and Heikki Lindholm. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
The ancient ppcdebug/PPCDBG mechanism is now only used in two places. First, in the hash setup code, one of the bits allows the size of the hash table to be reduced by a factor of 8 - which would be better accomplished with a command line option for that purpose. The other was a bunch of bus walking related messages in the iSeries code, which would seem to be insufficient reason to keep the mechanism. This patch removes the last traces of this mechanism. Built and booted on iSeries and pSeries POWER5 LPAR (ARCH=powerpc). Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 11月, 2005 2 次提交
-
-
由 Michael Ellerman 提交于
register_vpa() doesn't actually do a VPA register call it just uses the flags you pass it, so rename it to vpa_call() to be clearer. We can then define register_vpa() and unregister_vpa() which are both simple wrappers around vpa_call(). (we'll need unregister_vpa() for kexec soon) We can then cleanup vpa_init(), and because vpa_init() is only called from platforms/pseries we remove the definition in asm-ppc64/smp.h. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
由 Michael Ellerman 提交于
Move plpar_wrappers.h into arch/powerpc/platforms/pseries, fixup white space, and update callers. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
-
- 10 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 21 9月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch slightly change the TLB flush batch mecanism so that we store the full vaddr (including vsid) when adding an entry to the batch so that the flush part doesn't have to get to the context. This cleans it a bit, and paves the way to future updates like dynamic vsids. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 06 9月, 2005 1 次提交
-
-
由 Milton Miller 提交于
Take udbg out of ppc_md. Allows us to not overwrite early udbg inits when assigning ppc_md. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 05 9月, 2005 1 次提交
-
-
由 Olof Johansson 提交于
We need to indicate to the hypervisor that it needs to save our VMX registers when switching partitions on a shared-processor system, just as it needs to for FP and PMC registers. This could be made to be on-demand when VMX is used, but we don't do that for FP nor PMC right now either so let's not overcomplicate things. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NPaul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: <engebret@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 8月, 2005 2 次提交
-
-
由 Michael Ellerman 提交于
physRpn_to_absRpn is a no-op on non-iSeries platforms, remove the two redundant calls. There's only one caller on iSeries so fold the logic in there so we can get rid of it completely. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 7月, 2005 1 次提交
-
-
由 David Gibson 提交于
This patch removes the use of bitfield types from the ppc64 hash table manipulation code. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-