That zero just means that nothing else found any irq information either.

This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in
run_posix_cpu_timers() on alpha/smp.  We didn't disable interrupts
properly before calling smp_percpu_timer_interrupt().

We *do* disable interrupts everywhere except this unfortunate
smp_percpu_timer_interrupt().  Fixed thus.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixup for the recent slab leak fix

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As usual, the reason of this breakage is quite silly: in do_entIF, we
are checking for PS == 0 to see whether it was a kernel BUG() or
userspace trap.

It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode
due to non-zero IPL, and the things get messed up horribly then.  In
this particular case it was BUG_ON(!irqs_disabled()) triggered in
run_posix_cpu_timers(), so we ended up shooting "current" with the
bursts of one SIGTRAP and three SIGILLs on every timer tick.  ;-)

Patch from Catalin Marinas

This patch calculates the AFS partition length by expanding the image
length information to the nearest erase block boundary. This
eliminates the problems with JFFS2 erasing the footer.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If CONFIG_SERIAL_8250_NR_UARTS is smaller than the array size in
asm/serial.h, we trampled on memory which wasn't ours.  Take our
big boots away by limiting the number of ports initialised to the
smaller of ...NR_UARTS and the array size.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

This patch fixes the V bit setting for the ARM1020x processors. At
reset, this bit is automatically set to the value of the HIVECSINIT
input signal which just happened to be 1 but it is not mandatory.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The new EABI gcc adds -mthumb-interwork by default, even if
-mabi=apcs-gnu is passed. This causes a warning for every compiled C
file when -march=armv4 is used. The patch adds -mno-thumb-interwork
if the option is supported. This is also useful since we don't need
any ARM/Thumb interworking in the kernel
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

This patch fixes a broken comment in the proc-arm1020.S file which
prevents the file compilation
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix a use-uninitialised bug.

Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch addresses the following minor issues:

  - Typo in printk
  - Redundant casts
  - Use C99 struct initializers instead of memset
  - Parenthesis around return value
  - Use inline instead of __inline__
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes 2.4 compatability header from freevxfs.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- fix a buffer_head leak in vxfs_getfsh()

- s/SLAB_KERNEL/GFP_KERNEL/

- check sb_bread() return value

- drop pointless buffer-mapped() test.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On system boot up, there was an failure reported to boot.msg:

     <5>Trying to move old root to /initrd ... failed

According to initrd(4) man page, step #7 of BOOT-UP OPERATION
is described as below:
          7. If the normal root file has directory /initrd, device
          /dev/ram0 is moved from  /  to  /initrd.   Otherwise  if
          directory  /initrd  does  not  exist device /dev/ram0 is
          unmounted.

We got service calls from customers concerning about this failure message
at boot time.  Many systems do not have /initrd and thus the message can be
changed in the case of non-existing /initrd so that it does not sound like
a failure of the system.
Signed-off-by: NJay Lan <jlan@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

udf_find_entry can never be called with a NULL argument, so we shouldn't
check for it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch plugs a slab cache leak in fat module initialization.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro.
 Fixed an error in the delay asm macro: '1' is an invalid immediate value.
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out).  Some minor
clean-ups in the make files.
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added 'mm/Kconfig' to the xtensa Kconfig file to get a flat memory layout.
Fixed a typo in one of the help texts (thanks Geert for pointing it out)
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I noticed this because I was doing some more ipc cleanups and I did the
original errno and ipc cleanups for other architectures, so it stuck out.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

xtensa should use valid_signal() instead of testing _NSIG directly like
everyone else.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce proper declarations for i8253_lock and i8259A_lock.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Editor snafu in which the call to ppc_sys_get_pdata got inside the if check
instead of before it.  Oops.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently selinux_sb_copy_data requires an entire page be allocated to
*orig when the function is called.  This "requirement" is based on the fact
that we call copy_page(in_save, nosec_save) and in_save = orig when the
data is not FS_BINARY_MOUNTDATA.  This means that if a caller were to call
do_kern_mount with only about 10 bytes of options, they would get passed
here and then we would corrupt PAGE_SIZE - 10 bytes of memory (with all
zeros.)

Currently it appears all in kernel FS's use one page of data so this has
not been a problem.  An out of kernel FS did just what is described above
and it would almost always panic shortly after they tried to mount.  From
looking else where in the kernel it is obvious that this string of data
must always be null terminated.  (See example in do_mount where it always
zeros the last byte.) Thus I suggest we use strcpy in place of copy_page.
In this way we make sure the amount we copy is always less than or equal to
the amount we received and since do_mount is zeroing the last byte this
should be safe for all.
Signed-off-by: NEric Paris <eparis@parisplace.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Acked-by: NJames Morris <jmorris@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In fixing the /proc/misc problem that was reported last week where the tpm
module name was being obfuscated in /proc/misc I introduced a bug in the
module unloading code.  This patch fixes the problem.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_KEXEC=y doesnt work:

arch/ppc/kernel/relocate_kernel.S:37: Error: unsupported relocation against SRR1
arch/ppc/kernel/relocate_kernel.S:39: Error: unsupported relocation against SRR0
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit 4866cde0 requires finish_arch_switch
to have only one parameter instead of two.

Also fix another compile error (double declaration of account_system_vtime)
if CONFIG_VIRT_CPU_ACCOUNTING is not defined.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As the information is now exported via sysfs, there's no need for an userspace
tool any longer.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up PCMCIA modalias file in sysfs
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The generic fbcon code tries to register and use the vsync IRQ for
ARM platforms with acornfb, but forgets to disable its own cursor
timer.  The result is a flickering flashing cursor.

Remove the code from the fbcon core to register this platform
private interrupt.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If we receive an unrecognised abort during boot, don't try to
send a signal to pid0, but instead report the current state.
This leads to less confusing debug reports.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use klist_del() instead of klist_remove() when unregistering devices.
This will prevent a deadlock when executing a recursive unregister using
device_for_each_child().

Signed-off-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No one was looking at the return value of bus_rescan_devices, and it
really wasn't anything that anyone in the kernel would ever care about.
So change it which enabled some counting code to be removed also.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core.  To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n).  If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.

Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table).  This patch does
not make it possible to override the driver's id table.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a single file, "unbind", to the sysfs directory of every
device that is currently bound to a driver.  To unbind the driver from
the device, write anything to this file and they will be disconnected
from each other.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>