usally we will use udc->tranceiver == NULL or
udc->tranceiver != NULL.
So when failed to get the udc->tranceiver by usb_get_phy(), we
directly set udc->tranceiver to be NULL.
Then the source code will not need macro IS_ERR_OR_NULL() for
udc->tranceiver judgement. It can reduce the line size and make
the judgement simple.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Signed-off-by: NChao Xie <chao.xie@marvell.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

use devm_xxx for otg driver probe. So we do need care about
the resources release in driver remove or failure handling
in driver probe.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The __exit_p() will be NULL if MODULE is no defined.
It will cause the warning. Removing __exit_p to remove
the warning.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

use devm_xxx for udc driver probe. So we do need care about
the resources release in driver remove or failure handling
in driver probe.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Those have been deprecated for a long time and
previous patches just converted all remaining
users of those.

Since there are no in-tree users and we don't
want any new users for them, let's obliterate
every piece of code related to those calls.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patches converts the driver into the new style start/stop
interface. As a result the driver no longer uses the static
global the_conroller variable.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/gadget/u_serial.c:1291:5: sparse: symbol \
	'userial_init' was not declared. Should it be static?
drivers/usb/gadget/zero.c:66:25: sparse: symbol \
	'gzero_options' was not declared. Should it be static?
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

this warning was introduced by previous patches,
fix it.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Use usb_gstrings_attach() to assign strings in f_acm to assign strings
ids.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The USB strings don't (yet) fully work in multiple configs/gadget
environment. The string id is assigned to the descriptor and the struct
usb_strings. We create a copy of the individual descriptor so we don't
clash if we use a function more than once. However, we have only one
struct usb_string for each string.

Currently each function which is used multiple times checks for
"id != 0" and only assigns string ids if it did not happen yet. This
works well if we use the same function multiple times as long as we do
it within the "one" gadget we have. Trouble starts once we use the same
function in a second gadget.

In order to solve this I introduce usb_gstrings_attach(). This function will
crate a copy all structs except for the strings which are not copied.
After the copy it will assign USB ids and attach it to cdev.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The configfs can't use all of composite's hooks because ->bind() and
->unbind() has to be done a little differently. ->disconnect() and
->setup() on the hand can be recycled.
This patch exports them both so configfs can use them.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch factors out two helper functions from composite_bind()
that is composite_dev_prepare() and its counterpart
composite_dev_cleanup().

This will be used by the configfs which requries a slightly different
bind/setup code because part of its configurations (i.e. config
descripts, cdev, …) are setup in advance and VID/PID and so one should
not be overwritten. Also the setup of ep0 endpoint can be delayed until
the UDC is assigned.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch adds udc_attach_driver() which allows to bind an UDC which is
specified by name to a driver. The name of available UDCs can be
obtained from /sys/class/udc. This interface is intended for configfs
interface.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We can have multiple usb_functions which origin is the same "instance".
Within one USB configuration there should be only one function of an
instance. This back pointer helps configfs to recoginze to which
instance a given usb_function belongs.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts the acm_ms gadget to make use of the function
framework to request the ACM function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts the acm_ms gadget to make use of the function
framework to request the ACM function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts the acm_ms gadget to make use of the function
framework to request the ACM function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts f_acm into a module which uses the new function
interface. It also converts one of its users that is g_serial to make
use of it. The other users of it (g_nokia for instance) are still using
the old include file system and should not notice the change at all. So
they can be converter later independently.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch removes gserial_setup() and gserial_cleanup() and adds
gserial_alloc_line() and gserial_free_line() to replace them.

The initial setup of u_serial happens now on module load time. A
maximum of four TTY ports can be requested which is the current limit.
In theory we could extend this limit, the hard limit is the number of
available endpoints.
alloc_tty_driver() is now called at module init time with the max
available ports. The per-line footprint here is on 32bit is 3 * size of
pointer + 60 bytes (for cdevs).
The remaining memory (struct gs_port) is allocated once a port is
requested.

With this change it is possible to load g_multi and g_serial at the same
time. GS0 receives the module that is loaded first, GS1 is received by
the next module and so on. With the configfs interface the port number
can be exported and the device node is more predictable. Nothing changes
for g_serial and friends as long as one module is used.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This will be used to remove a single function from a given config. Right
now "ignore" that an error at ->bind() time and cleanup later during
composite_unbind() / remove_config().
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Every user of u_serial has now to select the U_SERIAL symbol instead of
including the file.
There is one limition with this: ports and and gs_tty_driver are global
variables in u_serial. Since all users share them, there can be only one
user loaded at a time i.e. either g_serial or g_nokia.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch factors out the three possible functions into three possible
bind functions which are passed as an argument to usb_add_config(). This
will ease the step by step converting of the individual functions to the
new function registration method.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The significant part of this function was removed in 90f79768 ("USB:
Remove unsupported usb gadget drivers"). I would move this to function
bind time but I don't see the point in moving an empty function.
Therefore bye bye.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts the f_sourcesink and f_loopback file to the USB-function
module. Both functions shares a few common utility functions which are
currently implemented in g_zero.c itself. This patch moves the common
code into the sourcesink file and creates one module out of the the two
functions (source sink and loop back).
The g_zero gadget is function specific to source sink and loop back to
set a few options. This Symbol dependency enforces a modul load right
now.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch provides an infrastructure to register & unregister a USB
function. This allows to turn a function into a module and avoid the
'#include "f_.*.c"' magic and we get a clear API / cut between the bare
gadget and its functions.
The concept is simple:
Each function defines the DECLARE_USB_FUNCTION_INIT macro whith an unique
name of the function and two allocation functions.
- one to create an "instance". The instance holds the current configuration
  set. In case there are two usb_configudations with one function there will
  be one instance and two usb_functions
- one to create an "function" from the instance.

The name of the instance is used to automaticaly load the module if it the
instance is not yet available.
The usb_function callbacks are slightly modified and extended:
- usb_get_function()
  creates a struct usb_function inclunding all pointers (bind,
  unbind,…). It uses the "instance" to map its configuration. So we can
  have _two_ struct usb_function, one for each usb_configuration.
- ->unbind()
  Since the struct usb_function was not allocated in ->bind() it should
  not kfree()d here. This function should only reverse what happens in
  ->bind() that is request cleanup and the cleanup of allocated
  descriptors.
- ->free_func()
  a simple kfree() of the struct usb_function
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

f_loopback should only include the bare function but it also includes
the config descriptor. This patch moves the config descriptor into
zero.c, the only user of this function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

f_sourcesink should only include the bare function but it also includes
the config descriptor. This patch moves the config descriptor into
zero.c, the only user of this function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The setup request can be sent to an interface/endpoint or to the device
itself. If it is sent to an interface / endpoint then we forward it to
the function that is mapped to that interface / endpoint.
If the device is the target of the setup request then we forward it to the
->setup() callback of the currently active configuration.
In case of the sourcesink function the requests are function specific
but are sent to the device.
This patch introduces a setup wrapper at configuration level which
forwards the request to the function. By using this wrapper we can keep
the function specific code within the function file and we need just a
hint at config level to forward the request.
The here introduced global variable will be moved into the gadget (which
combines the two functions) in a later patch.
SourceSink is currently the only function using ->setup() at config level.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Removes a couple of:
|drivers/usb/gadget/s3c-hsudc.c: In function 's3c_hsudc_epin_intr':
|drivers/usb/gadget/s3c-hsudc.c:438:2: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast
|arch/arm/include/asm/io.h:104:19: note: expected 'const volatile void *' but argument is of type 'unsigned int'
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>