Our routines look at tscdeadline and period when deciding state of a
timer.  The timer is disarmed when switching between TSC deadline and
other modes, so we should set everything to disarmed state.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

preemption timer only looks at tscdeadline and could inject already
disarmed timer.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

0 should disable the timer, but start_hv_timer will recognize it as an
expired timer instead.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The description in the Intel SDM of how the divide configuration
register is used: "The APIC timer frequency will be the processor's bus
clock or core crystal clock frequency divided by the value specified in
the divide configuration register."

Observation of baremetal shown that when the TDCR is change, the TMCCT
does not change or make a big jump in value, but the rate at which it
count down change.

The patch update the emulation to APIC timer to so that a change to the
divide configuration would be reflected in the value of the counter and
when the next interrupt is triggered.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Fixed some whitespace and added a check for negative delta and running
 timer. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

If we take TSC-deadline mode timer out of the picture, the Intel SDM
does not say that the timer is disable when the timer mode is change,
either from one-shot to periodic or vice versa.

After this patch, the timer is no longer disarmed on change of mode, so
the counter (TMCCT) keeps counting down.

So what does a write to LVTT changes ? On baremetal, the change of mode
is probably taken into account only when the counter reach 0. When this
happen, LVTT is use to figure out if the counter should restard counting
down from TMICT (so periodic mode) or stop counting (if one-shot mode).

This patch is based on observation of the behavior of the APIC timer on
baremetal as well as check that they does not go against the description
written in the Intel SDM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Fixed rate limiting of periodic timer.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Extract the logic of limit lapic periodic timer frequency to a new function,
this function will be used by later patches.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

SDM 10.5.4.1 TSC-Deadline Mode mentioned that "Transitioning between TSC-Deadline
mode and other timer modes also disarms the timer". So the APIC Timer Initial Count
Register for one-shot/periodic mode should be reset. This patch do it.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Removed unnecessary definition of APIC_LVT_TIMER_MASK.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

A comment might serve future readers.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It has been experimentally confirmed that supporting these two MSRs is one
of the necessary conditions for nested Hyper-V to use the TSC page. Modern
Windows guests are noticeably slower when they fall back to reading
timestamps from the HV_X64_MSR_TIME_REF_COUNT MSR instead of using the TSC
page.

The newly supported MSRs are advertised with the AccessFrequencyRegs
partition privilege flag and CPUID.40000003H:EDX[8] "Support for
determining timer frequencies is available" (both outside of the scope of
this KVM patch).
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Preempt can occur in the preemption timer expiration handler:

          CPU0                    CPU1

  preemption timer vmexit
  handle_preemption_timer(vCPU0)
    kvm_lapic_expired_hv_timer
      hv_timer_is_use == true
  sched_out
                           sched_in
                           kvm_arch_vcpu_load
                             kvm_lapic_restart_hv_timer
                               restart_apic_timer
                                 start_hv_timer
                                   already-expired timer or sw timer triggerd in the window
                                 start_sw_timer
                                   cancel_hv_timer
                           /* back in kvm_lapic_expired_hv_timer */
                           cancel_hv_timer
                             WARN_ON(!apic->lapic_timer.hv_timer_in_use);  ==> Oops

This can be reproduced if CONFIG_PREEMPT is enabled.

------------[ cut here ]------------
 WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1563 kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm]
 CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G           OE   4.13.0-rc2+ #16
 RIP: 0010:kvm_lapic_expired_hv_timer+0x9e/0xb0 [kvm]
Call Trace:
  handle_preemption_timer+0xe/0x20 [kvm_intel]
  vmx_handle_exit+0xb8/0xd70 [kvm_intel]
  kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm]
  ? kvm_arch_vcpu_load+0x47/0x230 [kvm]
  ? kvm_arch_vcpu_load+0x62/0x230 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x81/0x220
  entry_SYSCALL64_slow_path+0x25/0x25
 ------------[ cut here ]------------
 WARNING: CPU: 4 PID: 2972 at /home/kernel/linux/arch/x86/kvm//lapic.c:1498 cancel_hv_timer.isra.40+0x4f/0x60 [kvm]
 CPU: 4 PID: 2972 Comm: qemu-system-x86 Tainted: G        W  OE   4.13.0-rc2+ #16
 RIP: 0010:cancel_hv_timer.isra.40+0x4f/0x60 [kvm]
Call Trace:
  kvm_lapic_expired_hv_timer+0x3e/0xb0 [kvm]
  handle_preemption_timer+0xe/0x20 [kvm_intel]
  vmx_handle_exit+0xb8/0xd70 [kvm_intel]
  kvm_arch_vcpu_ioctl_run+0xdd1/0x1be0 [kvm]
  ? kvm_arch_vcpu_load+0x47/0x230 [kvm]
  ? kvm_arch_vcpu_load+0x62/0x230 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x81/0x220
  entry_SYSCALL64_slow_path+0x25/0x25

This patch fixes it by making the caller of cancel_hv_timer, start_hv_timer
and start_sw_timer be in preemption-disabled regions, which trivially
avoid any reentrancy issue with preempt notifier.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Add more WARNs. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the TSC deadline timer is programmed really close to the deadline or
even in the past, the computation in vmx_set_hv_timer will program the
absolute target tsc value to vmcs preemption timer field w/ delta == 0,
then plays a vmentry and an upcoming vmx preemption timer fire vmexit
dance, the lapic timer injection is delayed due to this duration. Actually
the lapic timer which is emulated by hrtimer can handle this correctly.

This patch fixes it by firing the lapic timer and injecting a timer interrupt
immediately during the next vmentry if the TSC deadline timer is programmed
really close to the deadline or even in the past. This saves ~300 cycles on
the tsc_deadline_timer test of apic.flat.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the code to cancel the hv timer into the caller, just before
it starts the hrtimer.  Check availability of the hv timer in
start_hv_timer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are many cases in which the hv timer must be canceled.  Split out
a new function to avoid duplication.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM says, that at most one LAPIC should be configured with ExtINT
delivery. KVM configures all LAPICs this way. This causes pic_unlock()
to kick the first available vCPU from the internal KVM data structures.
If this vCPU is not the BSP, but some not-yet-booted AP, the BSP may
never realize that there is an interrupt.

Fix that by enabling ExtINT delivery only for the BSP.

This allows booting a Linux guest without a TSC in the above situation.
Otherwise the BSP gets stuck in calibrate_delay_converge().
Signed-off-by: NJan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Preemption can occur during cancel preemption timer, and there will be
inconsistent status in lapic, vmx and vmcs field.

          CPU0                    CPU1

  preemption timer vmexit
  handle_preemption_timer(vCPU0)
    kvm_lapic_expired_hv_timer
      vmx_cancel_hv_timer
        vmx->hv_deadline_tsc = -1
        vmcs_clear_bits
        /* hv_timer_in_use still true */
  sched_out
                           sched_in
                           kvm_arch_vcpu_load
                             vmx_set_hv_timer
                               write vmx->hv_deadline_tsc
                               vmcs_set_bits
                           /* back in kvm_lapic_expired_hv_timer */
                           hv_timer_in_use = false
                           ...
                           vmx_vcpu_run
                             vmx_arm_hv_run
                               write preemption timer deadline
                             spurious preemption timer vmexit
                               handle_preemption_timer(vCPU0)
                                 kvm_lapic_expired_hv_timer
                                   WARN_ON(!apic->lapic_timer.hv_timer_in_use);

This can be reproduced sporadically during boot of L2 on a
preemptible L1, causing a splat on L1.

 WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
 CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ #24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm]
  Call Trace:
  handle_preemption_timer+0xe/0x20 [kvm_intel]
  vmx_handle_exit+0xc9/0x15f0 [kvm_intel]
  ? lock_acquire+0xdb/0x250
  ? lock_acquire+0xdb/0x250
  ? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm]
  kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm]
  kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? __fget+0xf3/0x210
  do_vfs_ioctl+0xa4/0x700
  ? __fget+0x114/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x8f/0x750
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL64_slow_path+0x25/0x25

This patch fixes it by disabling preemption while cancelling
preemption timer.  This way cancel_hv_timer is atomic with
respect to kvm_arch_vcpu_load.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Patch series "kvmalloc", v5.

There are many open coded kmalloc with vmalloc fallback instances in the
tree.  Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.

As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.

Most callers, I could find, have been converted to use the helper
instead.  This is patch 6.  There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.

[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com

This patch (of 9):

Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code.  Yet we do not have any common helper
for that and so users have invented their own helpers.  Some of them are
really creative when doing so.  Let's just add kv[mz]alloc and make sure
it is implemented properly.  This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures.  This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.

This patch also changes some existing users and removes helpers which
are specific for them.  In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL).  Those need to be
fixed separately.

While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers.  Existing ones would have to die
slowly.

[sfr@canb.auug.org.au: f2fs fixup]
  Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>	[ext4 part]
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit bbd64115.

I've been sitting on this revert for too long and it unfortunately
missed 4.11.  It's also the reason why I haven't merged ring-based
dirty tracking for 4.12.

Using kvm_vcpu_memslots in kvm_gfn_to_hva_cache_init and
kvm_vcpu_write_guest_offset_cached means that the MSR value can
now be used to access SMRAM, simply by making it point to an SMRAM
physical address.  This is problematic because it lets the guest
OS overwrite memory that it shouldn't be able to touch.

Cc: stable@vger.kernel.org
Fixes: bbd64115Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Provide versions of struct gfn_to_hva_cache functions that
take vcpu as a parameter instead of struct kvm.  The existing functions
are not needed anymore, so delete them.  This allows dirty pages to
be logged in the vcpu dirty ring, instead of the global dirty ring,
for ring-based dirty memory tracking.
Signed-off-by: NLei Cao <lei.cao@stratus.com>
Message-Id: <CY1PR08MB19929BD2AC47A291FD680E83F04F0@CY1PR08MB1992.namprd08.prod.outlook.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since bf9f6ac8 ("KVM: Update Posted-Interrupts Descriptor when vCPU
is blocked", 2015-09-18) the posted interrupt descriptor is checked
unconditionally for PIR.ON.  Therefore we don't need KVM_REQ_EVENT to
trigger the scan and, if NMIs or SMIs are not involved, we can avoid
the complicated event injection path.

Calling kvm_vcpu_kick if PIR.ON=1 is also useless, though it has been
there since APICv was introduced.

However, without the KVM_REQ_EVENT safety net KVM needs to be much
more careful about races between vmx_deliver_posted_interrupt and
vcpu_enter_guest.  First, the IPI for posted interrupts may be issued
between setting vcpu->mode = IN_GUEST_MODE and disabling interrupts.
If that happens, kvm_trigger_posted_interrupt returns true, but
smp_kvm_posted_intr_ipi doesn't do anything about it.  The guest is
entered with PIR.ON, but the posted interrupt IPI has not been sent
and the interrupt is only delivered to the guest on the next vmentry
(if any).  To fix this, disable interrupts before setting vcpu->mode.
This ensures that the IPI is delayed until the guest enters non-root mode;
it is then trapped by the processor causing the interrupt to be injected.

Second, the IPI may be issued between kvm_x86_ops->sync_pir_to_irr(vcpu)
and vcpu->mode = IN_GUEST_MODE.  In this case, kvm_vcpu_kick is called
but it (correctly) doesn't do anything because it sees vcpu->mode ==
OUTSIDE_GUEST_MODE.  Again, the guest is entered with PIR.ON but no
posted interrupt IPI is pending; this time, the fix for this is to move
the RVI update after IN_GUEST_MODE.

Both issues were mostly masked by the liberal usage of KVM_REQ_EVENT,
though the second could actually happen with VT-d posted interrupts.
In both race scenarios KVM_REQ_EVENT would cancel guest entry, resulting
in another vmentry which would inject the interrupt.

This saves about 300 cycles on the self_ipi_* tests of vmexit.flat.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Calls to apic_find_highest_irr are scanning IRR twice, once
in vmx_sync_pir_from_irr and once in apic_search_irr.  Change
sync_pir_from_irr to get the new maximum IRR from kvm_apic_update_irr;
now that it does the computation, it can also do the RVI write.

In order to avoid complications in svm.c, make the callback optional.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add return value to __kvm_apic_update_irr/kvm_apic_update_irr.
Move vmx_sync_pir_to_irr around.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pending interrupts might be in the PI descriptor when the
LAPIC is restored from an external state; we do not want
them to be injected.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.

Use the new static_key_deferred_flush() API to flush pending updates on
module unload.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On interrupt delivery the PPR can only grow (except for auto-EOI),
so it is impossible that non-auto-EOI interrupt delivery results
in KVM_REQ_EVENT.  We can therefore use __apic_update_ppr.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On PPR update, we set KVM_REQ_EVENT unconditionally anytime PPR is lowered.
But we can take into account IRR here already.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PPR needs to be updated whenever on every IRR read because we
may have missed TPR writes that _increased_ PPR.  However, these
writes need not generate KVM_REQ_EVENT, because either KVM_REQ_EVENT
has been set already in __apic_accept_irq, or we are going to
process the interrupt right away.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since we're already in VCPU context, all we have to do here is recompute
the PPR value.  That will in turn generate a KVM_REQ_EVENT if necessary.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

LAPIC after reset is in xAPIC mode, which poses a problem for hotplug of
VCPUs with high APIC ID, because reset VCPU is waiting for INIT/SIPI,
but there is no way to uniquely address it using xAPIC.

From many possible options, we chose the one that also works on real
hardware: accepting interrupts addressed to LAPIC's x2APIC ID even in
xAPIC mode.

KVM intentionally differs from real hardware, because real hardware
(Knights Landing) does just "x2apic_id & 0xff" to decide whether to
accept the interrupt in xAPIC mode and it can deliver one interrupt to
more than one physical destination, e.g. 0x123 to 0x123 and 0x23.

Fixes: 682f732e ("KVM: x86: bump MAX_VCPUS to 288")
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Slow path tried to prevent IPIs from x2APIC VCPUs from being delivered
to xAPIC VCPUs and vice-versa.  Make slow path behave like fast path,
which never distinguished that.
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There were three calls sites:
 - recalculate_apic_map and kvm_apic_match_physical_addr, where it would
   only complicate implementation of x2APIC hotplug;
 - in apic_debug, where it was still somewhat preserved, but keeping the
   old function just for apic_debug was not worth it
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>

Cluster xAPIC delivery incorrectly assumed that dest_id <= 0xff.
With enabled KVM_X2APIC_API_USE_32BIT_IDS in KVM_CAP_X2APIC_API, a
userspace can send an interrupt with dest_id that results in
out-of-bounds access.

Found by syzkaller:

  BUG: KASAN: slab-out-of-bounds in kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 at addr ffff88003d9ca750
  Read of size 8 by task syz-executor/22923
  CPU: 0 PID: 22923 Comm: syz-executor Not tainted 4.9.0-rc4+ #49
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
   [...]
  Call Trace:
   [...] __dump_stack lib/dump_stack.c:15
   [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51
   [...] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
   [...] print_address_description mm/kasan/report.c:194
   [...] kasan_report_error mm/kasan/report.c:283
   [...] kasan_report+0x231/0x500 mm/kasan/report.c:303
   [...] __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:329
   [...] kvm_irq_delivery_to_apic_fast+0x11fa/0x1210 arch/x86/kvm/lapic.c:824
   [...] kvm_irq_delivery_to_apic+0x132/0x9a0 arch/x86/kvm/irq_comm.c:72
   [...] kvm_set_msi+0x111/0x160 arch/x86/kvm/irq_comm.c:157
   [...] kvm_send_userspace_msi+0x201/0x280 arch/x86/kvm/../../../virt/kvm/irqchip.c:74
   [...] kvm_vm_ioctl+0xba5/0x1670 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3015
   [...] vfs_ioctl fs/ioctl.c:43
   [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679
   [...] SYSC_ioctl fs/ioctl.c:694
   [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
   [...] entry_SYSCALL_64_fastpath+0x1f/0xc2
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: e45115b6 ("KVM: x86: use physical LAPIC array for logical x2APIC")
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

From the Intel SDM, volume 3, section 10.4.3, "Enabling or Disabling the
Local APIC,"

  When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent
  to an IA-32 processor without an on-chip APIC. The CPUID feature flag
  for the APIC (see Section 10.4.2, "Presence of the Local APIC") is
  also set to 0.
Signed-off-by: NJim Mattson <jmattson@google.com>
[Changed subject tag from nVMX to x86.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

On some benchmarks (e.g. netperf with ioeventfd disabled), APICv
posted interrupts turn out to be slower than interrupt injection via
KVM_REQ_EVENT.

This patch optimizes a bit the IRR update, avoiding expensive atomic
operations in the common case where PI.ON=0 at vmentry or the PIR vector
is mostly zero.  This saves at least 20 cycles (1%) per vmexit, as
measured by kvm-unit-tests' inl_from_qemu test (20 runs):

              | enable_apicv=1  |  enable_apicv=0
              | mean     stdev  |  mean     stdev
    ----------|-----------------|------------------
    before    | 5826     32.65  |  5765     47.09
    after     | 5809     43.42  |  5777     77.02

Of course, any change in the right column is just placebo effect. :)
The savings are bigger if interrupts are frequent.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The base clock for the LAPIC timer is always CLOCK_MONOTONIC.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Most windows guests still utilize APIC Timer periodic/oneshot mode
instead of tsc-deadline mode, and the APIC Timer periodic/oneshot
mode are still emulated by high overhead hrtimer on host. This patch
converts the expected expire time of the periodic/oneshot mode to
guest deadline tsc in order to leverage VMX preemption timer logic
for APIC Timer tsc-deadline mode. After each preemption timer vmexit
preemption timer is restarted to emulate LVTT current-count register
is automatically reloaded from the initial-count register when the
count reaches 0. This patch reduces ~5600 cycles for each APIC Timer
periodic mode operation virtualization.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
[Squashed with my fixes that were reviewed-by Paolo.]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Rename start/cancel_hv_tscdeadline to start/cancel_hv_timer since
they will handle both APIC Timer periodic/oneshot mode and tsc-deadline
mode.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Introdce kvm_get_lapic_target_expiration_tsc() to get APIC Timer target
deadline tsc.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Check apic_lvtt_tscdeadline() mode directly instead of apic_lvtt_oneshot()
and apic_lvtt_period() to guarantee the timer is in tsc-deadline mode when
rdmsr MSR_IA32_TSCDEADLINE.
Suggested-by: NRadim Krčmář <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>