Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 25 1月, 2018 1 次提交
  3. 23 1月, 2018 1 次提交
  5. 17 1月, 2018 1 次提交
    • K
      perf tools: Add ARM Statistical Profiling Extensions (SPE) support · ffd3d18c
      由 Kim Phillips 提交于 
      'perf record' and 'perf report --dump-raw-trace' supported in this
release.

Example usage:

 # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000
 # perf report --dump-raw-trace

Note that the perf.data file is portable, so the report can be run on
another architecture host if necessary.

Output will contain raw SPE data and its textual representation, such
as:

0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000  offset: 0  ref: 0x1891ad0e  idx: 1  tid: 2227  cpu: 1
.
. ... ARM SPE data: size 2097152 bytes
.  00000000:  49 00                                           LD
.  00000002:  b2 c0 3b 29 0f 00 00 ff ff                      VA 0xffff00000f293bc0
.  0000000b:  b3 c0 eb 24 fb 00 00 00 80                      PA 0xfb24ebc0 ns=1
.  00000014:  9a 00 00                                        LAT 0 XLAT
.  00000017:  42 16                                           EV RETIRED L1D-ACCESS TLB-ACCESS
.  00000019:  b0 00 c4 15 08 00 00 ff ff                      PC 0xff00000815c400 el3 ns=1
.  00000022:  98 00 00                                        LAT 0 TOT
.  00000025:  71 36 6c 21 2c 09 00 00 00                      TS 39395093558
.  0000002e:  49 00                                           LD
.  00000030:  b2 80 3c 29 0f 00 00 ff ff                      VA 0xffff00000f293c80
.  00000039:  b3 80 ec 24 fb 00 00 00 80                      PA 0xfb24ec80 ns=1
.  00000042:  9a 00 00                                        LAT 0 XLAT
.  00000045:  42 16                                           EV RETIRED L1D-ACCESS TLB-ACCESS
.  00000047:  b0 f4 11 16 08 00 00 ff ff                      PC 0xff0000081611f4 el3 ns=1
.  00000050:  98 00 00                                        LAT 0 TOT
.  00000053:  71 36 6c 21 2c 09 00 00 00                      TS 39395093558
.  0000005c:  48 00                                           INSN-OTHER
.  0000005e:  42 02                                           EV RETIRED
.  00000060:  b0 2c ef 7f 08 00 00 ff ff                      PC 0xff0000087fef2c el3 ns=1
.  00000069:  98 00 00                                        LAT 0 TOT
.  0000006c:  71 d1 6f 21 2c 09 00 00 00                      TS 39395094481
...

Other release notes:

- applies to acme's perf/{core,urgent} branches, likely elsewhere

- Report is self-contained within the tool.
  Record requires enabling the kernel SPE driver by
  setting CONFIG_ARM_SPE_PMU.

- The intel-bts implementation was used as a starting point; its
  min/default/max buffer sizes and power of 2 pages granularity need to be
  revisited for ARM SPE

- Recording across multiple SPE clusters/domains not supported

- Snapshot support (record -S), and conversion to native perf events
  (e.g., via 'perf inject --itrace'), are also not supported

- Technically both cs-etm and spe can be used simultaneously, however
  disabled for simplicity in this release
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Reviewed-by: NDongjiu Geng <gengdongjiu@huawei.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ffd3d18c
  7. 23 10月, 2017 1 次提交
  9. 22 9月, 2017 1 次提交
    • A
      perf tools: Provide mutex wrappers for pthreads rwlocks · 0a7c74ea
      由 Arnaldo Carvalho de Melo 提交于 
      Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.

I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.

The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: NAndi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0a7c74ea
  11. 13 9月, 2017 1 次提交
    • A
      perf stat: Support JSON metrics in perf stat · b18f3e36
      由 Andi Kleen 提交于 
      Add generic support for standalone metrics specified in JSON files to
perf stat. A metric is a formula that uses multiple events to compute a
higher level result (e.g. IPC).

Previously metrics were always tied to an event and automatically
enabled with that event. But now change it that we can have standalone
metrics. They are in the same JSON data structure as events, but don't
have an event name.

We also allow to organize the metrics in metric groups, which allows a
short cut to select several related metrics at once.

Add a new -M / --metrics option to perf stat that adds the metrics or
metric groups specified.

Add the core code to manage and parse the metric groups. They are
collected from the JSON data structures into a separate rblist.  When
computing shadow values look for metrics in that list.  Then they are
computed using the existing saved values infrastructure in stat-shadow.c

The actual JSON metrics are in a separate pull request.

  % perf stat -M Summary --metric-only -a sleep 1

   Performance counter stats for 'system wide':

  Instructions   CLKS          CPU_Utilization  GFLOPs   SMT_2T_Utilization   Kernel_Utilization
  317614222.0    1392930775.0  0.0              0.0      0.2                  0.1

       1.001497549 seconds time elapsed

  % perf stat -M GFLOPs flops

   Performance counter stats for 'flops':

     3,999,541,471  fp_comp_ops_exe.sse_scalar_single #  1.2 GFLOPs   (66.65%)
                14  fp_comp_ops_exe.sse_scalar_double                 (66.65%)
                 0  fp_comp_ops_exe.sse_packed_double                 (66.67%)
                 0  fp_comp_ops_exe.sse_packed_single                 (66.70%)
                 0  simd_fp_256.packed_double                         (66.70%)
                 0  simd_fp_256.packed_single                         (66.67%)
                 0  duration_time

       3.238372845 seconds time elapsed

v2: Add missing header file
v3: Move find_map to pmu.c
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b18f3e36
  13. 22 8月, 2017 1 次提交
  15. 19 7月, 2017 2 次提交
  17. 26 4月, 2017 1 次提交
  19. 21 4月, 2017 1 次提交
  21. 20 4月, 2017 1 次提交
  23. 28 3月, 2017 1 次提交
  25. 23 3月, 2017 1 次提交
    • A
      perf tools: Add a simple expression parser for JSON · 07516736
      由 Andi Kleen 提交于 
      Add a simple expression parser good enough to parse JSON relation
expressions. The parser is implemented using bison.

This is just intended as an simple parser for internal usage in the
event lists, not the beginning of a "perf scripting language"

v2: Use expr__ prefix instead of expr_
    Support multiple free variables for parser

Committer note:

The v2 patch had:

  %define api.pure full

In expr.y, that is a feature introduced in bison 2.7, to have reentrant
parsers, not using global variables, which would make tools/perf stop
building with the bison version shipped in older distros, so Andi
realised that the other parsers (e.g. parse-events.y) were using:

  %pure-parser

Which is present in older versions of bison and fits the bill.

I added:

  CFLAGS_expr-bison.o += -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w

To finally make it build, copying what was there for pmu-bison.o,
another parser.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-8-andi@firstfloor.org
[ stdlib.h is needed in tests/expr.c for free() fixing build in systems such as ubuntu:16.04-x-s390 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      07516736
  27. 16 3月, 2017 1 次提交
    • A
      perf script: Add 'brstackinsn' for branch stacks · 48d02a1d
      由 Andi Kleen 提交于 
      Implement printing instruction sequences as hex dump for branch stacks.

This relies on the x86 instruction decoder used by the PT decoder to
find the lengths of instructions to dump them individually.

This is good enough for pattern matching.

This allows to study hot paths for individual samples, together with
branch misprediction and cycle count / IPC information if available (on
Skylake systems).

  % perf record -b ...
  % perf script -F brstackinsn
  ...
    read_hpet+67:
          ffffffff9905b843        insn: 74 ea                     # PRED
          ffffffff9905b82f        insn: 85 c9
          ffffffff9905b831        insn: 74 12
          ffffffff9905b833        insn: f3 90
          ffffffff9905b835        insn: 48 8b 0f
          ffffffff9905b838        insn: 48 89 ca
          ffffffff9905b83b        insn: 48 c1 ea 20
          ffffffff9905b83f        insn: 39 f2
          ffffffff9905b841        insn: 89 d0
          ffffffff9905b843        insn: 74 ea                     # PRED

Only works when no special branch filters are specified.

Occasionally the path does not reach up to the sample IP, as the LBRs
may be frozen before executing a final jump. In this case we print a
special message.

The instruction dumper piggy backs on the existing infrastructure from
the IP PT decoder.

An earlier iteration of this patch relied on a disassembler, but this
version only uses the existing instruction decoder.

Committer note:

Added hint about how to get suitable perf.data files for use with
'-F brstackinsm':

  $ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
  $
  $ perf script -F brstackinsn
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'
  $
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      48d02a1d
  29. 14 3月, 2017 1 次提交
    • H
      perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info · f3b3614a
      由 Hari Bathini 提交于 
      Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.

Committer notes:

Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.

Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:

  util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
     ret  += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
                                         ^
Testing it:

  # perf record --namespaces -a
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
  #
  # perf report -D
  <SNIP>
  3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
                [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
                 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]

  0x1151e0 [0x30]: event: 9
  .
  . ... raw event: size 48 bytes
  .  0000:  09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00  ......0..q.h....
  .  0010:  a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00  .9...9...(.c....
  .  0020:  03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00  ................
  <SNIP>
        NAMESPACES events:          1
  <SNIP>
  #
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f3b3614a
  31. 17 1月, 2017 1 次提交
  33. 06 12月, 2016 1 次提交
    • W
      perf clang: Add builtin clang support ant test case · 00b86691
      由 Wang Nan 提交于 
      Add basic clang support in clang.cpp and test__clang() testcase. The
first testcase checks if builtin clang is able to generate LLVM IR.

tests/clang.c is a proxy. Real testcase resides in
utils/c++/clang-test.cpp in c++ and exports C interface to perf test
subsystem.

Test result:

   $ perf test -v clang
   51: builtin clang support                               :
   51.1: Test builtin clang compile C source to IR              :
   --- start ---
   test child forked, pid 13215
   test child finished with 0
   ---- end ----
   Test builtin clang support subtest 0: Ok

Committer note:

Make sure you've enabled CLANG and LLVM builtin support by setting
the LIBCLANGLLVM variable on the make command line, e.g.:

  make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin

Otherwise you'll get this when trying to do the 'perf test' call above:

  # perf test clang
  51: builtin clang support                      : Skip (not compiled in)
  #
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com
[ Removed "Test" from descriptions, redundant and already removed from all the other entries ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      00b86691
  35. 02 12月, 2016 1 次提交
  37. 29 11月, 2016 1 次提交
    • W
      perf tools: Introduce perf hooks · a074865e
      由 Wang Nan 提交于 
      Perf hooks allow hooking user code at perf events. They can be used for
manipulation of BPF maps, taking snapshot and reporting results. In this
patch two perf hook points are introduced: record_start and record_end.

To avoid buggy user actions, a SIGSEGV signal handler is introduced into
'perf record'. It turns off perf hook if it causes a segfault and report
an error to help debugging.

A test case for perf hook is introduced.

Test result:
  $ ./buildperf/perf test -v hook
  50: Test perf hooks                                          :
  --- start ---
  test child forked, pid 10311
  SIGSEGV is observed as expected, try to recover.
  Fatal error (SEGFAULT) in perf hook 'test'
  test child finished with 0
  ---- end ----
  Test perf hooks: Ok
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-5-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a074865e
  39. 24 10月, 2016 1 次提交
  41. 22 9月, 2016 1 次提交
  43. 09 9月, 2016 1 次提交
    • P
      perf annotate: Add branch stack / basic block · 70fbe057
      由 Peter Zijlstra 提交于 
      I wanted to know the hottest path through a function and figured the
branch-stack (LBR) information should be able to help out with that.

The below uses the branch-stack to create basic blocks and generate
statistics from them.

        from    to              branch_i
        * ----> *
                |
                | block
                v
                * ----> *
                from    to      branch_i+1

The blocks are broken down into non-overlapping ranges, while tracking
if the start of each range is an entry point and/or the end of a range
is a branch.

Each block iterates all ranges it covers (while splitting where required
to exactly match the block) and increments the 'coverage' count.

For the range including the branch we increment the taken counter, as
well as the pred counter if flags.predicted.

Using these number we can find if an instruction:

 - had coverage; given by:

        br->coverage / br->sym->max_coverage

   This metric ensures each symbol has a 100% spot, which reflects the
   observation that each symbol must have a most covered/hottest
   block.

 - is a branch target: br->is_target && br->start == add

 - for targets, how much of a branch's coverages comes from it:

	target->entry / branch->coverage

 - is a branch: br->is_branch && br->end == addr

 - for branches, how often it was taken:

        br->taken / br->coverage

   after all, all execution that didn't take the branch would have
   incremented the coverage and continued onward to a later branch.

 - for branches, how often it was predicted:

        br->pred / br->taken

The coverage percentage is used to color the address and asm sections;
for low (<1%) coverage we use NORMAL (uncolored), indicating that these
instructions are not 'important'. For high coverage (>75%) we color the
address RED.

For each branch, we add an asm comment after the instruction with
information on how often it was taken and predicted.

Output looks like (sans color, which does loose a lot of the
information :/)

$ perf record --branch-filter u,any -e cycles:p ./branches 27
$ perf annotate branches

 Percent |	Source code & Disassembly of branches for cycles:pu (217 samples)
---------------------------------------------------------------------------------
         :	branches():
    0.00 :	  40057a:       push   %rbp
    0.00 :	  40057b:       mov    %rsp,%rbp
    0.00 :	  40057e:       sub    $0x20,%rsp
    0.00 :	  400582:       mov    %rdi,-0x18(%rbp)
    0.00 :	  400586:       mov    %rsi,-0x20(%rbp)
    0.00 :	  40058a:       mov    -0x18(%rbp),%rax
    0.00 :	  40058e:       mov    %rax,-0x10(%rbp)
    0.00 :	  400592:       movq   $0x0,-0x8(%rbp)
    0.00 :	  40059a:       jmpq   400656 <branches+0xdc>
    1.84 :	  40059f:       mov    -0x10(%rbp),%rax	# +100.00%
    3.23 :	  4005a3:       and    $0x1,%eax
    1.84 :	  4005a6:       test   %rax,%rax
    0.00 :	  4005a9:       je     4005bf <branches+0x45>	# -54.50% (p:42.00%)
    0.46 :	  4005ab:       mov    0x200bbe(%rip),%rax        # 601170 <acc>
   12.90 :	  4005b2:       add    $0x1,%rax
    2.30 :	  4005b6:       mov    %rax,0x200bb3(%rip)        # 601170 <acc>
    0.46 :	  4005bd:       jmp    4005d1 <branches+0x57>	# -100.00% (p:100.00%)
    0.92 :	  4005bf:       mov    0x200baa(%rip),%rax        # 601170 <acc>	# +49.54%
   13.82 :	  4005c6:       sub    $0x1,%rax
    0.46 :	  4005ca:       mov    %rax,0x200b9f(%rip)        # 601170 <acc>
    2.30 :	  4005d1:       mov    -0x10(%rbp),%rax	# +50.46%
    0.46 :	  4005d5:       mov    %rax,%rdi
    0.46 :	  4005d8:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
    0.00 :	  4005dd:       mov    %rax,-0x10(%rbp)	# +100.00%
    0.92 :	  4005e1:       mov    -0x18(%rbp),%rax
    0.00 :	  4005e5:       and    $0x1,%eax
    0.00 :	  4005e8:       test   %rax,%rax
    0.00 :	  4005eb:       je     4005ff <branches+0x85>	# -100.00% (p:100.00%)
    0.00 :	  4005ed:       mov    0x200b7c(%rip),%rax        # 601170 <acc>
    0.00 :	  4005f4:       shr    $0x2,%rax
    0.00 :	  4005f8:       mov    %rax,0x200b71(%rip)        # 601170 <acc>
    0.00 :	  4005ff:       mov    -0x10(%rbp),%rax	# +100.00%
    7.37 :	  400603:       and    $0x1,%eax
    3.69 :	  400606:       test   %rax,%rax
    0.00 :	  400609:       jne    400612 <branches+0x98>	# -59.25% (p:42.99%)
    1.84 :	  40060b:       mov    $0x1,%eax
   14.29 :	  400610:       jmp    400617 <branches+0x9d>	# -100.00% (p:100.00%)
    1.38 :	  400612:       mov    $0x0,%eax	# +57.65%
   10.14 :	  400617:       test   %al,%al	# +42.35%
    0.00 :	  400619:       je     40062f <branches+0xb5>	# -57.65% (p:100.00%)
    0.46 :	  40061b:       mov    0x200b4e(%rip),%rax        # 601170 <acc>
    2.76 :	  400622:       sub    $0x1,%rax
    0.00 :	  400626:       mov    %rax,0x200b43(%rip)        # 601170 <acc>
    0.46 :	  40062d:       jmp    400641 <branches+0xc7>	# -100.00% (p:100.00%)
    0.92 :	  40062f:       mov    0x200b3a(%rip),%rax        # 601170 <acc>	# +56.13%
    2.30 :	  400636:       add    $0x1,%rax
    0.92 :	  40063a:       mov    %rax,0x200b2f(%rip)        # 601170 <acc>
    0.92 :	  400641:       mov    -0x10(%rbp),%rax	# +43.87%
    2.30 :	  400645:       mov    %rax,%rdi
    0.00 :	  400648:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
    0.00 :	  40064d:       mov    %rax,-0x10(%rbp)	# +100.00%
    1.84 :	  400651:       addq   $0x1,-0x8(%rbp)
    0.92 :	  400656:       mov    -0x8(%rbp),%rax
    5.07 :	  40065a:       cmp    -0x20(%rbp),%rax
    0.00 :	  40065e:       jb     40059f <branches+0x25>	# -100.00% (p:100.00%)
    0.00 :	  400664:       nop
    0.00 :	  400665:       leaveq
    0.00 :	  400666:       retq

(Note: the --branch-filter u,any was used to avoid spurious target and
branch points due to interrupts/faults, they show up as very small -/+
annotations on 'weird' locations)

Committer note:

Please take a look at:

  http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png

To see the colors.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
[ Moved sym->max_coverage to 'struct annotate', aka symbol__annotate(sym) ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      70fbe057
  45. 01 9月, 2016 1 次提交
  47. 28 7月, 2016 1 次提交
  49. 13 7月, 2016 3 次提交
    • D
      perf symbols: Add Rust demangling · cae15db7
      由 David Tolnay 提交于 
      Rust demangling is another step after bfd demangling. Add a diagnosis to
identify mangled Rust symbols based on the hash that the Rust mangler appends
as the last path component, as well as other characteristics.  Add a demangler
to reconstruct the original symbol.

Committer notes:

How I tested it:

Enabled COPR on Fedora 24 and then installed the 'rust-binary' package,
with it:

  $ cat src/main.rs
  fn main() {
      println!("Hello, world!");
  }
  $ cat Cargo.toml
  [package]

  name = "hello_world"
  version = "0.0.1"
  authors = [ "Arnaldo Carvalho de Melo <acme@kernel.org>" ]

  $ perf record cargo bench
   Compiling hello_world v0.0.1 (file:///home/acme/projects/hello_world)
     Running target/release/hello_world-d4b9dab4b2a47d75

  running 0 tests

  test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured

  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.096 MB perf.data (1457 samples) ]
  $

Before this patch:

  $ perf report --stdio --dsos librbml-e8edd0fd.so
  # dso: librbml-e8edd0fd.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:u'
  # Event count (approx.): 979599126
  #
  # Overhead  Command  Symbol
  # ........  .......  .............................................................................................................
  #
       1.78%  rustc    [.] rbml::reader::maybe_get_doc::hb9d387df6024b15b
       1.50%  rustc    [.] _$LT$reader..DocsIterator$LT$$u27$a$GT$$u20$as$u20$std..iter..Iterator$GT$::next::hd9af9e60d79a35c8
       1.20%  rustc    [.] rbml::reader::doc_at::hc88107fba445af31
       0.46%  rustc    [.] _$LT$reader..TaggedDocsIterator$LT$$u27$a$GT$$u20$as$u20$std..iter..Iterator$GT$::next::h0cb40e696e4bb489
       0.35%  rustc    [.] rbml::reader::Decoder::_next_int::h66eef7825a398bc3
       0.29%  rustc    [.] rbml::reader::Decoder::_next_sub::h8e5266005580b836
       0.15%  rustc    [.] rbml::reader::get_doc::h094521c645459139
       0.14%  rustc    [.] _$LT$reader..Decoder$LT$$u27$doc$GT$$u20$as$u20$serialize..Decoder$GT$::read_u32::h0acea2fff9669327
       0.07%  rustc    [.] rbml::reader::Decoder::next_doc::h6714d469c9dfaf91
       0.07%  rustc    [.] _ZN4rbml6reader10doc_as_u6417h930b740aa94f1d3aE@plt
       0.06%  rustc    [.] _fini
  $

After:

  $ perf report --stdio --dsos librbml-e8edd0fd.so
  # dso: librbml-e8edd0fd.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:u'
  # Event count (approx.): 979599126
  #
  # Overhead  Command  Symbol
  # ........  .......  .................................................................
  #
     1.78%  rustc    [.] rbml::reader::maybe_get_doc
     1.50%  rustc    [.] <reader::DocsIterator<'a> as std::iter::Iterator>::next
     1.20%  rustc    [.] rbml::reader::doc_at
     0.46%  rustc    [.] <reader::TaggedDocsIterator<'a> as std::iter::Iterator>::next
     0.35%  rustc    [.] rbml::reader::Decoder::_next_int
     0.29%  rustc    [.] rbml::reader::Decoder::_next_sub
     0.15%  rustc    [.] rbml::reader::get_doc
     0.14%  rustc    [.] <reader::Decoder<'doc> as serialize::Decoder>::read_u32
     0.07%  rustc    [.] rbml::reader::Decoder::next_doc
     0.07%  rustc    [.] _ZN4rbml6reader10doc_as_u6417h930b740aa94f1d3aE@plt
     0.06%  rustc    [.] _fini
  $
Signed-off-by: NDavid Tolnay <dtolnay@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5780B7FA.3030602@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cae15db7
    • A
      perf tools: Uninline scnprintf() and vscnprint() · d0761e37
      由 Arnaldo Carvalho de Melo 提交于 
      They were in tools/include/linux/kernel.h, requiring that it in turn
included stdio.h, which is way too heavy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-855h8olnkot9v0dajuee1lo3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d0761e37
    • A
      tools: Introduce str_error_r() · c8b5f2c9
      由 Arnaldo Carvalho de Melo 提交于 
      The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c8b5f2c9
  51. 08 6月, 2016 2 次提交
  53. 07 6月, 2016 2 次提交
  55. 10 5月, 2016 1 次提交
  57. 07 5月, 2016 1 次提交
  59. 19 4月, 2016 1 次提交
  61. 15 4月, 2016 2 次提交
  63. 08 4月, 2016 2 次提交
    • A
      perf tools: Build syscall table .c header from kernel's syscall_64.tbl · 1b700c99
      由 Arnaldo Carvalho de Melo 提交于 
      We used libaudit to map ids to syscall names and vice-versa, but that
imposes a delay in supporting new syscalls, having to wait for libaudit
to get those new syscalls on its tables.

To remove that delay, for x86_64 initially, grab a copy of
arch/x86/entry/syscalls/syscall_64.tbl and use it to generate those
tables.

Syscalls currently not available in audit-libs:

  # trace -e copy_file_range,membarrier,mlock2,pread64,pwrite64,timerfd_create,userfaultfd
  Error:	Invalid syscall copy_file_range, membarrier, mlock2, pread64, pwrite64, timerfd_create, userfaultfd
  Hint:	try 'perf list syscalls:sys_enter_*'
  Hint:	and: 'man syscalls'
  #

With this patch:

  # trace -e copy_file_range,membarrier,mlock2,pread64,pwrite64,timerfd_create,userfaultfd
    8505.733 ( 0.010 ms): gnome-shell/2519 timerfd_create(flags: 524288) = 36
    8506.688 ( 0.005 ms): gnome-shell/2519 timerfd_create(flags: 524288) = 40
   30023.097 ( 0.025 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63ae382000, count: 4096, pos: 529592320) = 4096
   31268.712 ( 0.028 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63afd8b000, count: 4096, pos: 2314133504) = 4096
   31268.854 ( 0.016 ms): qemu-system-x8/24629 pwrite64(fd: 18, buf: 0x7f63afda2000, count: 4096, pos: 2314137600) = 4096

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-51xfjbxevdsucmnbc4ka5r88@git.kernel.org
[ Added make dep for 'prepare' in 'LIBPERF_IN', fix by Wang Nan to fix parallell build ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1b700c99
    • A
      perf trace: Move syscall table id <-> name routines to separate class · fd0db102
      由 Arnaldo Carvalho de Melo 提交于 
      We're using libaudit for doing name to id and id to syscall name
translations, but that makes 'perf trace' to have to wait for newer
libaudit versions supporting recently added syscalls, such as
"userfaultfd" at the time of this changeset.

We have all the information right there, in the kernel sources, so move
this code to a separate place, wrapped behind functions that will
progressively use the kernel source files to extract the syscall table
for use in 'perf trace'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i38opd09ow25mmyrvfwnbvkj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fd0db102
  65. 02 4月, 2016 1 次提交