Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 29 4月, 2019 1 次提交
    • J
      Provide in-kernel headers to make extending kernel easier · 43d8ce9d
      由 Joel Fernandes (Google) 提交于 
      Introduce in-kernel headers which are made available as an archive
through proc (/proc/kheaders.tar.xz file). This archive makes it
possible to run eBPF and other tracing programs that need to extend the
kernel for tracing purposes without any dependency on the file system
having headers.

A github PR is sent for the corresponding BCC patch at:
https://github.com/iovisor/bcc/pull/2312

On Android and embedded systems, it is common to switch kernels but not
have kernel headers available on the file system. Further once a
different kernel is booted, any headers stored on the file system will
no longer be useful. This is an issue even well known to distros.
By storing the headers as a compressed archive within the kernel, we can
avoid these issues that have been a hindrance for a long time.

The best way to use this feature is by building it in. Several users
have a need for this, when they switch debug kernels, they do not want to
update the filesystem or worry about it where to store the headers on
it. However, the feature is also buildable as a module in case the user
desires it not being part of the kernel image. This makes it possible to
load and unload the headers from memory on demand. A tracing program can
load the module, do its operations, and then unload the module to save
kernel memory. The total memory needed is 3.3MB.

By having the archive available at a fixed location independent of
filesystem dependencies and conventions, all debugging tools can
directly refer to the fixed location for the archive, without concerning
with where the headers on a typical filesystem which significantly
simplifies tooling that needs kernel headers.

The code to read the headers is based on /proc/config.gz code and uses
the same technique to embed the headers.

Other approaches were discussed such as having an in-memory mountable
filesystem, but that has drawbacks such as requiring an in-kernel xz
decompressor which we don't have today, and requiring usage of 42 MB of
kernel memory to host the decompressed headers at anytime. Also this
approach is simpler than such approaches.
Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      43d8ce9d
  3. 07 3月, 2019 1 次提交
    • A
      time: Make VIRT_CPU_ACCOUNTING_GEN depend on GENERIC_CLOCKEVENTS · 041a1574
      由 Arnd Bergmann 提交于 
      Moving the CONTEXT_TRACKING Kconfig option into kernel/time/Kconfig added
an implicit dependency on the surrounding GENERIC_CLOCKEVENTS option, but
this is not always enabled when it is possible to select
VIRT_CPU_ACCOUNTING_GEN:

WARNING: unmet direct dependencies detected for CONTEXT_TRACKING
  Depends on [n]: GENERIC_CLOCKEVENTS [=n]
  Selected by [y]:
  - VIRT_CPU_ACCOUNTING_GEN [=y] && <choice> && HAVE_CONTEXT_TRACKING [=y] && HAVE_VIRT_CPU_ACCOUNTING_GEN [=y]

Platforms without GENERIC_CLOCKEVENTS are rare enough so that corner case
can be just ignored. Make it a dependency for VIRT_CPU_ACCOUNTING_GEN to
simplify the configuration.

Fixes: a4cffdad ("time: Move CONTEXT_TRACKING to kernel/time/Kconfig")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Paul E . McKenney" <paulmck@linux.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/20190304200202.1163250-1-arnd@arndb.de
      041a1574
  5. 04 3月, 2019 1 次提交
  7. 28 2月, 2019 1 次提交
    • J
      Add io_uring IO interface · 2b188cc1
      由 Jens Axboe 提交于 
      The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.

IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.

Two new system calls are added for this:

io_uring_setup(entries, params)
	Sets up an io_uring instance for doing async IO. On success,
	returns a file descriptor that the application can mmap to
	gain access to the SQ ring, CQ ring, and io_uring_sqes.

io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
	Initiates IO against the rings mapped to this fd, or waits for
	them to complete, or both. The behavior is controlled by the
	parameters passed in. If 'to_submit' is non-zero, then we'll
	try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
	kernel will wait for 'min_complete' events, if they aren't
	already available. It's valid to set IORING_ENTER_GETEVENTS
	and 'min_complete' == 0 at the same time, this allows the
	kernel to return already completed events without waiting
	for them. This is useful only for polling, as for IRQ
	driven IO, the application can just check the CQ ring
	without entering the kernel.

With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.

For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.

Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.

Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.cReviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      2b188cc1
  9. 27 2月, 2019 1 次提交
  11. 02 2月, 2019 2 次提交
  13. 14 1月, 2019 1 次提交
    • P
      kbuild: Disable LD_DEAD_CODE_DATA_ELIMINATION with ftrace & GCC <= 4.7 · 16fd20aa
      由 Paul Burton 提交于 
      When building using GCC 4.7 or older, -ffunction-sections & the -pg flag
used by ftrace are incompatible. This causes warnings or build failures
(where -Werror applies) such as the following:

  arch/mips/generic/init.c:
    error: -ffunction-sections disabled; it makes profiling impossible

This used to be taken into account by the ordering of calls to cc-option
from within the top-level Makefile, which was introduced by commit
90ad4052 ("kbuild: avoid conflict between -ffunction-sections and
-pg on gcc-4.7"). Unfortunately this was broken when the
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to
Kconfig in commit e85d1d65 ("kbuild: test dead code/data elimination
support in Kconfig"), because the flags used by this check no longer
include -pg.

Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be
enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building
using GCC 4.7 or older.
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Fixes: e85d1d65 ("kbuild: test dead code/data elimination support in Kconfig")
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      16fd20aa
  15. 06 1月, 2019 1 次提交
    • M
      jump_label: move 'asm goto' support test to Kconfig · e9666d10
      由 Masahiro Yamada 提交于 
      Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".

The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:

  #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
  # define HAVE_JUMP_LABEL
  #endif

We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.

Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
      e9666d10
  17. 15 12月, 2018 1 次提交
  19. 01 12月, 2018 1 次提交
    • J
      psi: make disabling/enabling easier for vendor kernels · e0c27447
      由 Johannes Weiner 提交于 
      Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Tested-by: NMel Gorman <mgorman@techsingularity.net>
Reported-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e0c27447
  21. 20 11月, 2018 1 次提交
  23. 27 10月, 2018 2 次提交
  25. 02 10月, 2018 1 次提交
  27. 24 8月, 2018 1 次提交
  29. 23 8月, 2018 2 次提交
  31. 18 8月, 2018 1 次提交
  33. 09 8月, 2018 1 次提交
  35. 02 8月, 2018 3 次提交
  37. 18 7月, 2018 1 次提交
    • L
      kbuild: Add build salt to the kernel and modules · 9afb719e
      由 Laura Abbott 提交于 
      In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.

Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.

Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.
Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      9afb719e
  39. 28 6月, 2018 1 次提交
  41. 25 6月, 2018 1 次提交
  43. 14 6月, 2018 1 次提交
    • C
      dma-mapping: move all DMA mapping code to kernel/dma · cf65a0f6
      由 Christoph Hellwig 提交于 
      Currently the code is split over various files with dma- prefixes in the
lib/ and drives/base directories, and the number of files keeps growing.
Move them into a single directory to keep the code together and remove
the file name prefixes.  To match the irq infrastructure this directory
is placed under the kernel/ directory.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
      cf65a0f6
  45. 08 6月, 2018 2 次提交
  47. 06 6月, 2018 1 次提交
    • M
      rseq: Introduce restartable sequences system call · d7822b1e
      由 Mathieu Desnoyers 提交于 
      Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.

* Restartable sequences (per-cpu atomics)

Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.

The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.

Here are benchmarks of various rseq use-cases.

Test hardware:

arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading

The following benchmarks were all performed on a single thread.

* Per-CPU statistic counter increment

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                344.0                 31.4          11.0
x86-64:                15.3                  2.0           7.7

* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
             per-cpu buffer

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:               2502.0                 2250.0         1.1
x86-64:               117.4                   98.0         1.2

* liburcu percpu: lock-unlock pair, dereference, read/compare word

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                751.0                 128.5          5.8
x86-64:                53.4                  28.6          1.9

* jemalloc memory allocator adapted to use rseq

Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):

The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.

* Reading the current CPU number

Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.

Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:

- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
  executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
  assembly, which makes it a useful building block for restartable
  sequences.
- The approach of reading the cpu id through memory mapping shared
  between kernel and user-space is portable (e.g. ARM), which is not the
  case for the lsl-based x86 vdso.

On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.

Benchmarking various approaches for reading the current CPU number:

ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop):                                    8.4 ns
- Read CPU from rseq cpu_id:                               16.7 ns
- Read CPU from rseq cpu_id (lazy register):               19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu:                           301.8 ns
- getcpu system call:                                     234.9 ns

x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop):                                    0.8 ns
- Read CPU from rseq cpu_id:                                0.8 ns
- Read CPU from rseq cpu_id (lazy register):                0.8 ns
- Read using gs segment selector:                           0.8 ns
- "lsl" inline assembly:                                   13.0 ns
- glibc 2.19-0ubuntu6 getcpu:                              16.6 ns
- getcpu system call:                                      53.9 ns

- Speed (benchmark taken on v8 of patchset)

Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:

Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.

* CONFIG_RSEQ=n

avg.:      41.37 s
std.dev.:   0.36 s

* CONFIG_RSEQ=y

avg.:      40.46 s
std.dev.:   0.33 s

- Size

On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.

[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdfSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com
      d7822b1e
  49. 29 5月, 2018 3 次提交
    • M
      kconfig: replace $(UNAME_RELEASE) with function call · 2972666a
      由 Masahiro Yamada 提交于 
      Now that 'shell' function is supported, this can be self-contained in
Kconfig.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>
      2972666a
    • M
      kconfig: reference environment variables directly and remove 'option env=' · 104daea1
      由 Masahiro Yamada 提交于 
      To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
      104daea1
    • M
      kbuild: remove CONFIG_CROSS_COMPILE support · f1089c92
      由 Masahiro Yamada 提交于 
      Kbuild provides a couple of ways to specify CROSS_COMPILE:

[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE

[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc.  It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.

To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.

I guess the majority is [1] or [2].  Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
  arch/arm/configs/lpc18xx_defconfig
  arch/hexagon/configs/comet_defconfig
  arch/nds32/configs/defconfig
  arch/openrisc/configs/or1ksim_defconfig
  arch/openrisc/configs/simple_smp_defconfig
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
      f1089c92
  51. 18 5月, 2018 1 次提交
  53. 17 5月, 2018 1 次提交
  55. 15 5月, 2018 1 次提交
    • S
      bpf: enable stackmap with build_id in nmi context · bae77c5e
      由 Song Liu 提交于 
      Currently, we cannot parse build_id in nmi context because of
up_read(&current->mm->mmap_sem), this makes stackmap with build_id
less useful. This patch enables parsing build_id in nmi by putting
the up_read() call in irq_work. To avoid memory allocation in nmi
context, we use per cpu variable for the irq_work. As a result, only
one irq_work per cpu is allowed. If the irq_work is in-use, we
fallback to only report ips.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
      bae77c5e
  57. 05 4月, 2018 2 次提交
    • D
      syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls · 7303e30e
      由 Dominik Brodowski 提交于 
      It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.

As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7303e30e
    • D
      syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y · 1bd21c6c
      由 Dominik Brodowski 提交于 
      It may be useful for an architecture to override the definitions of the
SYSCALL_DEFINE0() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>,
in particular to use a different calling convention for syscalls.

This patch provides a mechanism to do so: It introduces
CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, <asm/sycall_wrapper.h>
is included in <linux/syscalls.h> and may be used to define the macros
mentioned above. Moreover, as the syscall calling convention may be
different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the syscall function
prototypes in <linux/syscalls.h> are #ifndef'd out in that case.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-3-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1bd21c6c
  59. 26 3月, 2018 1 次提交
  61. 10 3月, 2018 1 次提交