- 20 5月, 2019 16 次提交
-
-
由 Anson Huang 提交于
On i.MX7D SDB board, sw2 supplies 1p0d/1p2 LDO, this patch assigns corresponding power supply for 1p0d/1p2 LDO to avoid confusion by below log: vdd1p0d: supplied by regulator-dummy vdd1p2: supplied by regulator-dummy With this patch, the power supply is more accurate: vdd1p0d: supplied by SW2 vdd1p2: supplied by SW2 Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and sw2 supplies vdd3p0 LDO, this patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log: vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy With this patch, the power supply is more accurate: vdd1p1: supplied by VGEN5 vdd3p0: supplied by SW2 vdd2p5: supplied by VGEN5 Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
Add clock-frequency property to CPU node. Avoids warnings like "/cpus/cpu@0 missing clock-frequency property" for "arm,cortex-a7". Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
This patch adds i.MX7ULP EVK board MIPI-DSI backlight support. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
Add i.MX7ULP EVK board PWM support. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Leo Yan 提交于
CoreSight DT bindings have been updated, thus the old compatible strings are obsolete and the drivers will report warning if DTS uses these obsolete strings. This patch switches to the new bindings for CoreSight dynamic funnel and static replicator, so can dismiss warning during initialisation. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Fabio Estevam <festevam@gmail.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: NLeo Yan <leo.yan@linaro.org> Acked-by: NSuzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Update pinmux settings according to hardware team input. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Add meaningful GPIO line names for the board GPIOs. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Add GPIO beeper, to let the board produce beeps. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Add GPIO power button and GPIO poweroff, which is present on new hardware. These let the system power itself off on shutdown. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
The yellow LED is in the ethernet jack socket, bind it to netdev trigger to indicate ethernet activity. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Add ethernet PHY GPIO reset line, to let the kernel to reset the PHY. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Turn USBH1 into Host and update the GPIO polarity of the regulator to match new hardware. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Marek Vasut 提交于
Enable flow control lines on UART1 and UART2, add matching pinmux entries. Add and enable UART3 with RS485 mode enabled on boot. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Reviewed-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
i.MX6Q/DL's WDOGs use IMX6QDL_CLK_IPG as clock root, assign IMX6QDL_CLK_IPG to them instead of IMX6QDL_CLK_DUMMY. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Anson Huang 提交于
i.MX6SL's KPP and WDOG use IMX6SL_CLK_IPG as clock root, assign IMX6SL_CLK_IPG to them instead of IMX6SL_CLK_DUMMY. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 17 5月, 2019 2 次提交
-
-
由 YueHaibing 提交于
Remove duplicated include. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 David Howells 提交于
Wire up the mount API syscalls on non-x86 arches. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 5月, 2019 2 次提交
-
-
由 Russell King 提交于
This reverts commit e8c24bbd. GCC 4.7, which is still permitted, emits code using the original syntax. This means we end up with lots of assembler warnings when building with a currently-supported version of gcc. Revert the commit (with fixups to keep the follow-on -mauto-it change) to avoid these warnings. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Stephen Boyd 提交于
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com> Acked-by: NTero Kristo <t-kristo@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: NMark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: NMax Filippov <jcmvbkbc@gmail.com> Acked-by: NJohn Crispin <john@phrozen.org> Acked-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NStephen Boyd <sboyd@kernel.org>
-
- 15 5月, 2019 7 次提交
-
-
由 Masahiro Yamada 提交于
Now that all instances of #include <asm/sizes.h> have been replaced with #include <linux/sizes.h>, we can remove these. Link: http://lkml.kernel.org/r/1553267665-27228-2-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
Since commit dccd2304 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common place. We need to eliminate potential issues beforehand. If it is enabled for arm, Clang build results in the following modpost warning: WARNING: vmlinux.o(.text+0x1124): Section mismatch in reference from the function setup_machine_tags() to the function .init.text:early_print() The function setup_machine_tags() references the function __init early_print(). This is often because setup_machine_tags lacks a __init annotation or the annotation of early_print is wrong. Link: http://lkml.kernel.org/r/20190423034959.13525-8-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
Patch series "compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING", v3. This patch (of 11): When function tracing for IPIs is enabled, we get a warning for an overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as triggered by raise_nmi(): arch/arm/kernel/smp.c: In function 'raise_nmi': arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds] trace_ipi_raise(target, ipi_types[ipinr]); This is a correct warning as we actually overflow the array here. This patch raise_nmi() to call __smp_cross_call() instead of smp_cross_call(), to avoid calling into ftrace. For clarification, I'm also adding a two new code comments describing how this one is special. The warning appears to have shown up after commit e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the number assignment from '15' to '8', but as far as I can tell has existed since the IPI tracepoints were first introduced. If we decide to backport this patch to stable kernels, we probably need to backport e7273ff4 as well. [yamada.masahiro@socionext.com: rebase on v5.1-rc1] Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com Fixes: e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI") Fixes: 365ec7b1 ("ARM: add IPI tracepoints") # v3.17 Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Mathieu Malaterre <malat@debian.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Borislav Petkov <bp@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Souptick Joarder 提交于
Convert to use vm_map_pages() to map range of kernel memory to user vma. Link: http://lkml.kernel.org/r/936e5e107c746a7310e3a3c471188ca3ac8f9754.1552921225.git.jrdr.linux@gmail.comSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
No need to handle the freeing disable in arch code when we already have a core hook (and a different name for the option) for it. Link: http://lkml.kernel.org/r/20190213174621.29297-7-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: NMike Rapoport <rppt@linux.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 5月, 2019 1 次提交
-
-
由 Viresh Kumar 提交于
Currently, the notifiers are called once for each CPU of the policy->cpus cpumask. It would be more optimal if the notifier can be called only once and all the relevant information be provided to it. Out of the 23 drivers that register for the transition notifiers today, only 4 of them do per-cpu updates and the callback for the rest can be called only once for the policy without any impact. This would also avoid multiple function calls to the notifier callbacks and reduce multiple iterations of notifier core's code (which does locking as well). This patch adds pointer to the cpufreq policy to the struct cpufreq_freqs, so the notifier callback has all the information available to it with a single call. The five drivers which perform per-cpu updates are updated to use the cpufreq policy. The freqs->cpu field is redundant now and is removed. Acked-by: David S. Miller <davem@davemloft.net> (sparc) Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 5月, 2019 1 次提交
-
-
由 Masahiro Yamada 提交于
These files do not define (USBHS_)DRIVER_NAME. Yet, they can be successfully compiled because they are never built as a module by anyone, i.e, the MODULE_ALIAS() calls are always no-op. A problem showed up when a patch "moduleparam: Save information about built-in modules in separate file" was applied. With this new feature, MODULE_*() will be populated even if the callers are built-in. To avoid the build errors, the lines referencing to the undefined macro must be removed. The complete fix is to remove all MODULE_* and #include <linux/module.h> like many "make ... explicitly non-modular" commits did. For now, I am touching only the offending lines. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 06 5月, 2019 2 次提交
-
-
由 Daniel Lezcano 提交于
The module support for the thermal subsystem makes little sense: - some subsystems relying on it are not modules, thus forcing the framework to be compiled in - it is compiled in for almost every configs, the remaining ones are a few platforms where I don't see why we can not switch the thermal to 'y'. The drivers can stay in tristate. - platforms need the thermal to be ready as soon as possible at boot time in order to mitigate Usually the subsystems framework are compiled-in and the plugs are as module. Remove the module option. The removal of the module related dead code will come after this patch gets in or is acked. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NGuenter Roeck <groeck@chromium.org> For mini2440: Acked-by: NKrzysztof Kozlowski <krzk@kernel.org> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Petr Štetiar 提交于
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. Signed-off-by: NPetr Štetiar <ynezz@true.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2019 3 次提交
-
-
由 Douglas Anderson 提交于
The "host" USB port on rk3288 has a hardware errata where we've got to assert a PHY reset whenever we see a remote wakeup. Add that quirk property to the device tree. Signed-off-by: NDouglas Anderson <dianders@chromium.org> Reviewed-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Douglas Anderson 提交于
Let's hook up the resets to the three USB PHYs on rk3288 as per the bindings. This is in preparation for a future patch that will set the "snps,reset-phy-on-wake" on the host port. Signed-off-by: NDouglas Anderson <dianders@chromium.org> Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
-
由 Alexandre Belloni 提交于
Allow selecting and unselecting the PIT clocksource driver so it doesn't have to be compiled when unused. Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
- 02 5月, 2019 1 次提交
-
-
由 Linus Walleij 提交于
This converts the EP93xx SPI master driver to use GPIO descriptors for chip select handling. EP93xx was using platform data to pass in GPIO lines, by converting all board files to use GPIO descriptor tables the core will look up the GPIO lines from the SPI device in the same manner as for device tree. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 01 5月, 2019 2 次提交
-
-
由 Hillf Danton 提交于
A new local variable is introduced for accessing p2m entry with lock protection. Signed-off-by: NHillf Danton <hdanton@sina.com> Signed-off-by: NStefano Stabellini <sstabellini@kernel.org> Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
-
由 Hillf Danton 提交于
Release the newly allocated p2m entry if we detect a duplicate in the RB tree. Signed-off-by: NHillf Danton <hdanton@sina.com> Signed-off-by: NStefano Stabellini <sstabellini@kernel.org> Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
-
- 30 4月, 2019 3 次提交
-
-
由 Adam Ford 提交于
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. This was previosly fixed on Torpedo, but missed on the SOM-LV Fixes: 5cb8b0fa ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: NAdam Ford <aford173@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Marc Zyngier 提交于
Instead of always going via arch_counter_get_cntvct_stable to access the counter workaround, let's have arch_timer_read_counter point to the right method. For that, we need to track whether any CPU in the system has a workaround for the counter. This is done by having an atomic variable tracking this. Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Marc Zyngier 提交于
When a given timer is affected by an erratum and requires an alternative implementation of set_next_event, we do a rather complicated dance to detect and call the workaround on each set_next_event call. This is clearly idiotic, as we can perfectly detect whether this CPU requires a workaround while setting up the clock event device. This only requires the CPU-specific detection to be done a bit earlier, and we can then safely override the set_next_event pointer if we have a workaround associated to that CPU. Acked-by: NMark Rutland <mark.rutland@arm.com> Acked-by; Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-