Add missing 4xx EMAC data sysfs nodes.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add Bamboo platform defconfig
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add Bamboo platform support.  This is an AMCC 440EP-based reference platform.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add PPC440EP core support.  PPC440EP is a PPC440-based SoC with a classic PPC
FPU and another set of peripherals.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Marked APUS and GEMINI as BROKEN since they do not build at the platform
level.  We have requested that the maintainers of these boards/platforms
fix them by the time 2.6.15 is released or we plan on concerning them
unmaintained and thus removing them.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cs89x0 talks a lot at boot.  Seems like debug leftover.  This patch
downgrades printks to KERN_DEBUG.  While we're at it, make these messages a
bit less obscure.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The default resync_max_sector is set to "mddev->size << 1".  If the
raid-personality-module updates mddev->size, it must update
resync_max_sectors too.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The code that sets the altivec capability of the CPU based on firmware
informations can enable altivec when the kernel has CONFIG_ALTIVEC
disabled.  This results in "interesting" crashes.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Improve the likelihood that someone submitting a patch will notify the
MAN-PAGES maintainer.

This is a follow-up to comments on the July 29 lkml email thread: "Broke nice
range for RLIMIT NICE"
Signed-off-by: NPaul Jackson <pj@sgi.com>
Cc: "Michael Kerrisk" <mtk-manpages@gmx.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Michael maintains the kernel manpages.  He wants us to tell him when we
change or augment the userspace API.  Add his contact details to
MAINTAINERS.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Peter Missel:
- Add support for the SVideo input on the GDI Black Gold.

Mauro Carvalho Chehab:
- Linux/version.h removed. Replaced by linux/utsname.h

Michael Krufky:
- Added analog support for DViCO FusionHDTV5 Gold.

CC: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fixed some bttv card numbers.

- BTTV and SAA7134 version numbers incremented to reflect changes.

- pci_dma_supported() is called after pci_set_dma_mask() which
  already did check that for us. This patch removes the unneeded call to
  pci_dma_supported() at bttv-driver.c

- Ensure a sufficient I2C bus idle time between 2 messages for
  saa7134-i2c.c

- It is important to write at first to MO_GP3_IO for cx88-tvaudio.c

- Use try_to_freeze() instead of refrigerator at msp3400.c

- Recognizing the MFPE05-2 Tuner at tveeprom.c

- Add new parameter to help identify radio chipsets at tuner module:
  show_i2c=1 will show 16 reading bytes from detected tuners.

- BTTV does generate some Unimplemented IOCTL log at tuner module:
  0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending
  MSP3400 calls to non-msp3400 tuners. Warning eliminated.
  VIDIOSAUDIO is also called, so debug messages updated. It is still
  requiring IOCTL implementation.

- Added two more tuners.

- Add support for the SVideo input on the GDI Black Gold.
Signed-off-by: NPeter Missel <peter.missel@onlinehome.de>
Signed-off-by: NGraham Bevan <graham.bevan@ntlworld.com>
Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t.online.de>
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We know that the randomisation slows down some workloads on Transmeta CPUs
by quite large amounts.  We think it's because the CPU needs to recode the
same x86 instructions when they pop up at a different virtual address after
a fork+exec.

So disable randomization by default on those CPUs.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make it compile with CONFIG_PM=n

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Seems that both Greg and I submitted the same patch and it just kept on
applying...

Cc: Greg KH <greg@kroah.com>
Cc: Kumar Gala <galak@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If there are devices that use interrupts over a suspend event, ACPI must
restore the PCI interrupt links on resume.  Anything else breaks any
device that hasn't been converted to the new (dubious) PM rules.

Drivers that need the irq free/re-aquire sequence can be done one by one
independently of this one.

There's no real guarantee that handle_mm_fault() will always be able to
break a COW situation - if an update from another thread ends up
modifying the page table some way, handle_mm_fault() may end up
requiring us to re-try the operation.

That's normally fine, but get_user_pages() ended up re-trying it as a
read, and thus a write access could in theory end up losing the dirty
bit or be done on a page that had not been properly COW'ed.

This makes get_user_pages() always retry write accesses as write
accesses by making "follow_page()" require that a writable follow has
the dirty bit set.  That simplifies the code and solves the race: if the
COW break fails for some reason, we'll just loop around and try again.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by: Jochen Hein (Bugzilla Bug 4312)

When there is disk I/O happening, the framebuffer has a little snow on
the screen.  Once I/O has finished, no garbage remains on screen.

This bug was explained by: Knut Petersen

Most important is CRTC register 2f, signal quality is also improved for
higher vclk values by changing set_vclk() according to the X drivers and
cyblafb.c

The fix is to set the performance register (0x2f) with a more stable
value.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by: Jochen Hein (Bugzilla Bug 4386)

booting leaves the end of long lines in the last line on screen when
scrolling.  When X is running, scrolling puts garbage on the screen
(looks like X data) Console switch fixes the screen.  Behaviour seems to
be identical with noaccel and without on the video=tridentfb parameter
in lilo.conf.

This bug was explained by: Knut_Petersen

Acceleration is broken for all BLADE 3D chips for all versions of kernel
2.6 except for 32bit modes.  Most important reason is that the u32 col
parameter of the graphics engine needs the color value replicated to all
u8 of the u32 (8bit modes) and to both u16 of the u32.

Fix color value passed to graphics engine, verified by the reporter.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ordering of setting and clearing device_add_pending went wrong on some
occasions, causing multifunction cards only to be handled correctly on the
first insertion, not on subsequent ones.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid registering PCMCIA CF cards before other IDE stuff. This means the risk
of /dev/hd* being re-ordered is lessened. The _sane_ thing to assert any
ordering is to use udev, nameif and so on, of course.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When you rm a watch, an IN_IGNORED event is sent down the event queue
with the watch descriptor that you just rm'd.

If you then add a watch you could get the ignored watch's wd and if you
haven't read the entire event queue, user space will think that it's
newly created watch was just ignored.

To avoid this problem we just use idr_get_new_above instead of
idr_get_new.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a file is moved over an existing file that you are watching,
inotify won't send you a DELETE_SELF event and it won't unref the inode
until the inotify instance is closed by the application.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch displays the name of the fbdev driver in sysfs.
Down the road this will replace the current proc handle we have.
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Drivers really only work well in SMP if they actually can be selected.
This is a leftover from the time when the 6pack drive only used to be
a bitrotten variant of the slip driver.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>

 Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi Jeff,

Here's a little patch fixing a typo in smc91x.h.

Regards,

Tony

--ReaqsoxgOBHFXBhH
Content-Type: text/x-chdr; charset=us-ascii
Content-Disposition: inline; filename="patch-fix-typo-smc91x.h"
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Yukon-Lite chipset needs workaround for revision 7 (or later).
Without this patch, chip gets stuck in low power mode and never
boots. Newer SysKonnect vendor code already had same patch.

Related bug in skge is http://bugs.gentoo.org/87822

Chris, please add for 2.6.12.2
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Contains general updates (additional configuration info, hopefully
better examples, updated some out of date info, and a bonus pass
through ispell to banish the "paramters.") and info specific to
gratuitous ARP and xmit policy functionality already in 2.6.13-rc2.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

SCSI=m must disallow static drivers.

The problem is that all the SATA drivers depend on SCSI_SATA.

With SCSI=m and SCSI_SATA=y this allows the static enabling of the SATA
drivers with unwanted effects, e.g.:
- SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y
  -> SCSI_ATA_ADMA is built statically but scsi/built-in.o is not linked
     into the kernel
- SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y, SCSI_SATA_AHCI=m
  -> SCSI_ATA_ADMA and libata are built statically but
     scsi/built-in.o is not linked into the kernel,
     SCSI_SATA_AHCI is built modular (unresolved symbols due to missing
                                      libata)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Increase driver version to 0.8
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Cleanup code that is used to toggle LED's. Since we
get called from ethtool, can use that thread rather than
setting up a timer.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

During autonegotiation set PHY interrupt mask to ignore
bogus speed change interrupts.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The code to clear fifo errors was incorrect and sending garbage
to the external phy. Removed the no longer used inline's funcs.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Minor whitespace cleanups.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The check for Yukon lite changes was restricting itself to
rev A3. It turns out that these changes are also true on A4
and later.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Cleanup the phy_lock deadlock because of relocking in the nway_reset path.
Reported by Francois Romieu.

Also, don't need to do irqsave/restore for blink,
just excluding bh is good enough.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Here is a fix for a typo, thanks Eliot Dresselhaus.
Since transmitter not active when device is down, it wasn't really noticed.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>