- 31 3月, 2015 1 次提交
-
-
由 Gavin Shan 提交于
The function eeh_add_parent_pe() is used to create a PE or add one edev to its parent PE. Current code checks if PE#0 is valid for the later case. Actually, we should validate PE#0 for both cases when EEH core regards PE#0 as invalid one (without flag EEH_VALID_PE_ZERO). Otherwise, not all EEH devices can be added to its parent PE#0 for EEH on P7IOC. The patch fixes the issue by validating PE#0 for the two cases. So far, we don't have PE#0 for EEH on P7IOC, but it will show up when we enable M64 for P7IOC. The patch also makes the error message more meaningful. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 3月, 2015 8 次提交
-
-
由 Gavin Shan 提交于
The patch removes struct eeh_dev::dn and the corresponding helper functions: eeh_dev_to_of_node() and of_node_to_eeh_dev(). Instead, eeh_dev_to_pdn() and pdn_to_eeh_dev() should be used to get the pdn, which might contain device_node on PowerNV platform. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
There are 3 EEH operations whose arguments contain device_node: read_config(), write_config() and restore_config(). The patch replaces device_node with pci_dn. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Originally, EEH core probes on device_node or pci_dev to populate EEH devices and PEs, which conflicts with the fact: SRIOV VFs are usually enabled and created by PF's driver and they don't have the corresponding device_nodes. Instead, SRIOV VFs have dynamically created pci_dn, which can be used for EEH probe. The patch reworks EEH probe for PowerNV and pSeries platforms to do probing based on pci_dn, instead of pci_dev or device_node any more. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch adds function traverse_pci_dn(), which is similar to traverse_pci_devices() except it takes pci_dn, not device_node as parameter. The pci_dev.c has been reworked to create eeh_dev from pci_dn, instead of device_node. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Originally, EEH probes on device_node or pci_dev and populates the corresponding eeh_dev. In the subsequent patches, EEH will probes on pci_dn and populates the corresponding eeh_dev. So we have to cache some information in pci_dn, either from device_node or SRIOV PF's enablement platform hook, to populate the eeh_dev properly. The motivation to probe pci_dn, instead of device node or pci_dev, to populate eeh_dev is SRIOV VFs are dynamically created and we don't have the corresponding device nodes for them. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The PCI config accessors previously relied on device_node. Unfortunately, VFs don't have a corresponding device_node, so change the accessors to use pci_dn instead. [bhelgaas: changelog] Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Currently, the PCI config accessors are implemented based on device node. Unfortunately, SRIOV VFs won't have the corresponding device nodes. pci_dn will be used in replacement with device node for SRIOV VFs. So we have to use pci_dn in PCI config accessors. The patch refactors pci_dn in following aspects to make it ready to be used in PCI config accessors as we do in subsequent patch: * pci_dn is organized as a hierarchy tree. PCI device's pci_dn is put to the child list of pci_dn of its upstream bridge or PHB. VF's pci_dn will be put to the child list of pci_dn of PF's bridge. * For one particular PCI device (VF or not), its pci_dn can be found from pdev->dev.archdata.pci_data, PCI_DN(devnode), or parent's list. The fast path (fetching pci_dn through PCI device instance) is populated during early fixup time. [bhelgaas: changelog] Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This is deprecated, it forces the driver to hop via the OF node that may or may not exist, instead use pci_dev_to_eeh_dev() which is simpler. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NShradha Shah <sshah@solarflare.com>
-
- 17 3月, 2015 12 次提交
-
-
由 Gavin Shan 提交于
The patch removes unused file eeh-ioda.c and updates makefile accordingly. Besides, the definition of "struct pnv_eeh_ops" and the instances are all removed. Until now, the chip layer of EEH implementation for PowerNV platform is removed completely. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation reset() and merges its logic to eeh_ops::reset(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation next_error() and merges its logic to eeh_ops::next_error(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation get_state() and merges its logic to eeh_ops::get_state(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation set_option() and merges its logic to eeh_ops::set_option(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation configure_bridge() and merges its logic to eeh_ops::configure_bridge(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB operation get_log() and merges its logic to eeh_ops::get_log(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation post_init() and merge its logic to eeh_ops::post_init(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch drops PHB EEH operation err_inject() and merge its logic to eeh_ops::err_inject(). Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch shortens names of EEH functions in powernv-eeh.c and no logic change introduced by this patch. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch fixes the comments about ppc_md.pcibios_fixup(), which should be called after allocating resources. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Function pcibios_set_pcie_reset_state() is possibly called by pci_reset_function(), on which VFIO infrastructure depends to issue reset. pcibios_set_pcie_reset_state() is issuing reset on the parent PE of the indicated PCI device. The reset causes state lost on all PCI devices except the indicated one as the argument to pcibios_set_pcie_reset_state(). Also, sideband MMIO access from guest when issuing reset would cause unexpected EEH error. For above two issues, the patch applies following enhancements to pcibios_set_pcie_reset_state(): * For all PCI devices except the indicated one, save their state prior to reset and restore state after that. * Explicitly freeze PE prior to reset and unfreeze it after that, in order to avoid unexpected EEH error. Tested-by: NPriya M. A <priyama2@in.ibm.com> Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 3月, 2015 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
POLL_OUT isn't what callers of ->poll() are expecting to see; it's actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap bit... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here's a round of USB fixes for 4.0-rc3. Nothing major, the usual gadget, xhci and usb-serial fixes and a few new device ids as well. All have been in linux-next successfully" * tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits) xhci: Workaround for PME stuck issues in Intel xhci xhci: fix reporting of 0-sized URBs in control endpoint usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards USB: ch341: set tty baud speed according to tty struct USB: serial: cp210x: Adding Seletek device id's USB: pl2303: disable break on shutdown USB: mxuport: fix null deref when used as a console USB: serial: clean up bus probe error handling USB: serial: fix port attribute-creation race USB: serial: fix tty-device error handling at probe USB: serial: fix potential use-after-free after failed probe USB: console: add dummy __module_get USB: ftdi_sio: add PIDs for Actisense USB devices Revert "USB: serial: make bulk_out_size a lower limit" cdc-acm: Add support for Denso cradle CU-321 usb-storage: support for more than 8 LUNs uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539 USB: usbfs: don't leak kernel data in siginfo xhci: Clear the host side toggle manually when endpoint is 'soft reset' xhci: Allocate correct amount of scratchpad buffers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 4.0-rc3. Along with the atime fix that you know about, here are some other serial driver bugfixes as well. Most notable is a wait_until_sent bugfix that was traced back to being around since before 2.6.12 that Johan has fixed up. All have been in linux-next successfully" * tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: fix tty_wait_until_sent maximum timeout TTY: fix tty_wait_until_sent on 64-bit machines USB: serial: fix infinite wait_until_sent timeout TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation net: irda: fix wait_until_sent poll timeout serial: uapi: Declare all userspace-visible io types serial: core: Fix iotype userspace breakage serial: sprd: Fix missing spin_unlock in sprd_handle_irq() console: Fix console name size mismatch tty: fix up atime/mtime mess, take four serial: 8250_dw: Fix get_mctrl behaviour serial:8250:8250_pci: delete unneeded quirk entries serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S Change email address for 8250_pci serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Revert "tty/serial: of_serial: add DT alias ID handling"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.0-rc3. Details are in the shortlog, nothing major, mostly IIO fixes for reported issues. All have been in linux-next successfully" * tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel staging: comedi: vmk80xx: remove "firmware version" kernel messages staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample() iio: ak8975: fix AK09911 dependencies iio: common: ssp_sensors: Protect PM-only functions to kill warning IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc Revert "iio:humidity:si7020: fix pointer to i2c client" iio: light: gp2ap020a00f: Select REGMAP_I2C iio: light: jsa1212: Select REGMAP_I2C iio: ad5686: fix optional reference voltage declaration iio:adc:mcp3422 Fix incorrect scales table iio: mxs-lradc: fix iio channel map regression iio: imu: adis16400: Fix sign extension staging: iio: ad2s1200: Fix sign extension iio: mxs-lradc: only update the buffer when its conversions have finished iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions iio: mxs-lradc: make ADC reads not disable touchscreen interrupts iio: mxs-lradc: separate touchscreen and buffer virtual channels iio: imu: inv_mpu6050: Prevent dereferencing NULL iio: iadc: wait_for_completion_timeout time in jiffies ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are two char/misc fixes for 4.0-rc3. One is a reported binder driver fix needed due to a change in the mm core that happened in 4.0-rc1. Another is a mei driver fix that resolves a reported issue in that driver. Both have been in linux-next for a while" * tag 'char-misc-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: make device disabled on stop unconditionally android: binder: fix binder mmap failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull "code of conflict" from Greg KH: "This file tries to set the rational basis for our code reviews, gives some advice on how to conduct them, and provides an excalation channel for any kernel developers if they so desire it" [ Let's see how this works ] * tag 'cc-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Code of Conflict
-
- 08 3月, 2015 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "A set of updates and bugfixes for the new designware-baytrail driver. And a documentation bugfix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: add required clocks property to binding i2c: designware-baytrail: baytrail_i2c_acquire() might sleep i2c: designware-baytrail: cross-check lock functions i2c: designware-baytrail: fix sparse warnings i2c: designware-baytrail: fix typo in error path i2c: designware-baytrail: describe magic numbers
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "This contains small fixes spread across the drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mmp_pdma: fix warning about slave caps dmaengine: qcom_bam_dma: fix wrong register offsets dmaengine: bam-dma: fix a warning about missing capabilities dmaengine: ioatdma: workaround for incorrect DMACAP register dmaengine: at_xdmac: fix for chan conf simplification dmaengine: dw: don't handle interrupt when dmaengine is not used dma: mmp-tdma: refine dma disable and dma-pos update dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks dmaenegine: mmp-pdma: fix irq handler overwrite physical chan issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "arm64 and generic kernel/module.c (acked by Rusty) fixes for CONFIG_DEBUG_SET_MODULE_RONX" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kernel/module.c: Update debug alignment after symtable generation arm64: Don't use is_module_addr in setting page attributes
-
- 07 3月, 2015 9 次提交
-
-
由 Johan Hovold 提交于
Currently tty_wait_until_sent may take up to twice as long as the requested timeout while waiting for driver and hardware buffers to drain. Fix this by taking the remaining number of jiffies after waiting for driver buffers to drain into account so that the timeout actually becomes a maximum timeout as it is documented to be. Note that this specifically implies tighter timings when closing a port as a consequence of actually honouring the port closing-wait setting for drivers relying on tty_wait_until_sent_from_close (e.g. via tty_port_close_start). Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.12 Reported-by: NZIV-Asier Llano Palacios <asier.llano@cgglobal.com> Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf01050 ("USB: serial: add generic wait_until_sent implementation") Cc: stable <stable@vger.kernel.org> # v3.10 Signed-off-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove incorrect and redundant wait_until_sent operation, which waits for the driver buffer rather than any hardware buffers to drain, something which is already taken care of by the tty layer (and chars_in_buffer). Signed-off-by: NJohan Hovold <johan@kernel.org> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
In case an infinite timeout (0) is requested, the irda wait_until_sent implementation would use a zero poll timeout rather than the default 200ms. Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
ioctl(TIOCGSERIAL|TIOCSSERIAL) report and can change the port->iotype. UART drivers use the UPIO_* definitions, but the uapi header defines parallel values and userspace uses these parallel values for ioctls; thus the userspace values are definitive. Define UPIO_* iotypes in terms of the uapi defines, SERIAL_IO_*; extend the uapi defines to include all values in use by the serial core. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
commit 3ffb1a81 ("serial: core: Add big-endian iotype") re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can assign the port iotype (which is expected to match the selected i/o accessors), so iotype values must not be changed. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Reviewed-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Axel Lin 提交于
Fix return from sprd_handle_irq() with spin_lock held. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
commit 6ae9200f ("enlarge console.name") increased the storage for the console name to 16 bytes, but not the corresponding struct console_cmdline::name storage. Console names longer than 8 bytes cause read beyond end-of-string and failure to match console; I'm not sure if there are other unexpected consequences. Cc: <stable@vger.kernel.org> # 2.6.22+ Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-