- 11 2月, 2014 1 次提交
-
-
由 Steve French 提交于
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option, it was trying to get the mode by querying the acl over the cifs rather than smb2 protocol. This patch makes that protocol independent and makes cifsacl smb2 mounts return a more intuitive operation not supported error (until we add a worker function for smb2_get_acl). Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr which would unconditionally call cifs_get_acl and cifs_set_acl (even when mounted smb2). I made those protocol independent last week (new protocol version operations "get_acl" and "set_acl" but did not add an smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP which at least is better than sending cifs requests on smb2 mount) The previous patches did not fix the one remaining case though ie mounting with "cifsacl" when getting mode from acl would unconditionally end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol independent but to make that protocol independent had to make sure that the callers were passing the protocol independent handle structure (cifs_fid) instead of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid) Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl) to enable this. Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 08 2月, 2014 1 次提交
-
-
由 Steve French 提交于
In the event that a send fails in an uncached write, or we end up needing to reissue it (-EAGAIN case), we'll kfree the wdata but the pages currently leak. Fix this by adding a new kref release routine for uncached writedata that releases the pages, and have the uncached codepaths use that. [original patch by Jeff modified to fix minor formatting problems] Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 20 1月, 2014 1 次提交
-
-
由 Pavel Shilovsky 提交于
Rename CIFSSMBOpen to CIFS_open and make it take cifs_open_parms structure as a parm. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 12 11月, 2013 1 次提交
-
-
由 Steve French 提交于
Opens on current cifs/smb2/smb3 mounts with O_DIRECT flag fail even when caching is disabled on the mount. This was reported by those running SMB2 benchmarks who need to be able to pass O_DIRECT on many of their open calls to reduce caching effects, but would also be needed by other applications. When mounting with forcedirectio ("cache=none") cifs and smb2/smb3 do not go through the page cache and thus opens with O_DIRECT flag should work (when posix extensions are negotiated we even are able to send the flag to the server). This patch fixes that in a simple way. The 9P client has a similar situation (caching is often disabled) and takes the same approach to O_DIRECT support ie works if caching disabled, but if client caching enabled it fails with EINVAL. A followon idea for a future patch as Pavel noted, could be that files opened with O_DIRECT could cause us to change inode->i_fop on the fly from cifs_file_strict_ops to cifs_file_direct_ops which would allow us to support this on non-forcedirectio mounts (cache=strict and cache=loose) as well. Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 18 9月, 2013 1 次提交
-
-
由 David Howells 提交于
In cifs_readpages(), we may decide we don't want to read a page after all - but the page may already have passed through fscache_read_or_alloc_pages() and thus have marks and reservations set. Thus we have to call fscache_readpages_cancel() or fscache_uncache_page() on the pages we're returning to clear the marks. NFS, AFS and 9P should be unaffected by this as they call read_cache_pages() which does the cleanup for you. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 14 9月, 2013 2 次提交
-
-
由 Sachin Prabhu 提交于
When reading a single page with cifs_readpage(), we make a call to fscache_read_or_alloc_page() which once done, asynchronously calls the completion function cifs_readpage_from_fscache_complete(). This completion function unlocks the page once it has been populated from cache. The module then attempts to unlock the page a second time in cifs_readpage() which leads to warning messages. In case of a successful call to fscache_read_or_alloc_page() we should skip the second unlock_page() since this will be called by the cifs_readpage_from_fscache_complete() once the page has been populated by fscache. With the modifications to cifs_readpage_worker(), we will need to re-grab the page lock in cifs_write_begin(). The problem was first noticed when testing new fscache patches for cifs. https://bugzilla.redhat.com/show_bug.cgi?id=1005737Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Sachin Prabhu 提交于
We do not need to take a reference to the pagecache in cifs_readpage_worker() since the calling function will have already taken one before passing the pointer to the page as an argument to the function. Signed-off-by: NSachin Prabhu <sprabhu@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 10 9月, 2013 2 次提交
-
-
由 Pavel Shilovsky 提交于
that force a client to purge cache pages when a server requests it. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
and separate smb20_operations struct. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 09 9月, 2013 1 次提交
-
-
由 Pavel Shilovsky 提交于
that prepare the code to handle different types of SMB2 leases. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 04 9月, 2013 1 次提交
-
-
由 Christoph Hellwig 提交于
Call generic_write_sync() from the deferred I/O completion handler if O_DSYNC is set for a write request. Also make sure various callers don't call generic_write_sync if the direct I/O code returns -EIOCBQUEUED. Based on an earlier patch from Jan Kara <jack@suse.cz> with updates from Jeff Moyer <jmoyer@redhat.com> and Darrick J. Wong <darrick.wong@oracle.com>. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 7月, 2013 1 次提交
-
-
由 Andi Shyti 提交于
In the cifs_reopen_file function, if the following statement is asserted: (tcon->unix_ext && cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP & (tcon->fsUnixInfo.Capability))) and we succeed to open with cifs_posix_open, the function jumps to the label reopen_success and checks for oparms.reconnect which is not initialized. This issue has been reported by scan.coverity.com Signed-off-by: NAndi Shyti <andi@etezian.org> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 12 7月, 2013 2 次提交
-
-
由 Pavel Shilovsky 提交于
If we request reading or writing on a file that needs to be reopened, it causes the deadlock: we are already holding rw semaphore for reading and then we try to acquire it for writing in cifs_relock_file. Fix this by acquiring the semaphore for reading in cifs_relock_file due to we don't make any changes in locks and don't need a write access. CC: <stable@vger.kernel.org> Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
This is a follow-on patch for 8/8 patch from the durable handles series. It fixes the problem when durable file handle timeout expired on the server and reopen returns -ENOENT for such files. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 11 7月, 2013 2 次提交
-
-
由 Pavel Shilovsky 提交于
On reconnects, we need to reopen file and then obtain all byte-range locks held by the client. SMB2 protocol provides feature to make this process atomic by reconnecting to the same file handle with all it's byte-range locks. This patch adds this capability for SMB2 shares. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteven French <steven@steven-GA-970A-DS3.(none)>
-
由 Pavel Shilovsky 提交于
and pass it to the open() call. Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org> Signed-off-by: NSteven French <steven@steven-GA-970A-DS3.(none)>
-
- 29 6月, 2013 2 次提交
-
-
由 Jeff Layton 提交于
Having a global lock that protects all of this code is a clear scalability problem. Instead of doing that, move most of the code to be protected by the i_lock instead. The exceptions are the global lists that the ->fl_link sits on, and the ->fl_block list. ->fl_link is what connects these structures to the global lists, so we must ensure that we hold those locks when iterating over or updating these lists. Furthermore, sound deadlock detection requires that we hold the blocked_list state steady while checking for loops. We also must ensure that the search and update to the list are atomic. For the checking and insertion side of the blocked_list, push the acquisition of the global lock into __posix_lock_file and ensure that checking and update of the blocked_list is done without dropping the lock in between. On the removal side, when waking up blocked lock waiters, take the global lock before walking the blocked list and dequeue the waiters from the global list prior to removal from the fl_block list. With this, deadlock detection should be race free while we minimize excessive file_lock_lock thrashing. Finally, in order to avoid a lock inversion problem when handling /proc/locks output we must ensure that manipulations of the fl_block list are also protected by the file_lock_lock. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Layton 提交于
commit 66189be7 (CIFS: Fix VFS lock usage for oplocked files) exported the locks_delete_block symbol. There's already an exported helper function that provides this capability however, so make cifs use that instead and turn locks_delete_block back into a static function. Note that if fl->fl_next == NULL then this lock has already been through locks_delete_block(), so we should be OK to ignore an ENOENT error here and simply not retry the lock. Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Acked-by: NJ. Bruce Fields <bfields@fieldses.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 5月, 2013 1 次提交
-
-
由 Lukas Czerner 提交于
Currently there is no way to truncate partial page where the end truncate point is not at the end of the page. This is because it was not needed and the functionality was enough for file system truncate operation to work properly. However more file systems now support punch hole feature and it can benefit from mm supporting truncating page just up to the certain point. Specifically, with this functionality truncate_inode_pages_range() can be changed so it supports truncating partial page at the end of the range (currently it will BUG_ON() if 'end' is not at the end of the page). This commit changes the invalidatepage() address space operation prototype to accept range to be invalidated and update all the instances for it. We also change the block_invalidatepage() in the same way and actually make a use of the new length argument implementing range invalidation. Actual file system implementations will follow except the file systems where the changes are really simple and should not change the behaviour in any way .Implementation for truncate_page_range() which will be able to accept page unaligned ranges will follow as well. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com>
-
- 05 5月, 2013 1 次提交
-
-
由 Joe Perches 提交于
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 10 4月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 3月, 2013 1 次提交
-
-
由 Mateusz Guzik 提交于
cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by: NMateusz Guzik <mguzik@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Reported-and-Tested-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 28 2月, 2013 1 次提交
-
-
由 Steve French 提交于
Samba rejected libreoffice's attempt to open a file with illegal O_EXCL (without O_CREAT). Mask this flag off (as the local linux file system case does) for this case, so that we don't have disable Unix Extensions unnecessarily due to the Samba error (Samba server is also being fixed). See https://bugzilla.samba.org/show_bug.cgi?id=9519Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 2月, 2013 2 次提交
-
-
由 Eric W. Biederman 提交于
Cc: Steve French <smfrench@gmail.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate the value should not be changed. In cifs_fill_unix_set_info convert from kuids and kgids into uids and gids that will fit in FILE_UNIX_BASIC_INFO. Cc: Steve French <smfrench@gmail.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 02 1月, 2013 3 次提交
-
-
由 Pavel Shilovsky 提交于
If we have mandatory byte-range locks on a file we can't cache reads because pagereading may have conflicts with these locks on the server. That's why we should allow level2 oplocks for files without mandatory locks only. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
If we have a read oplock and set a read lock in it, we can't write to the locked area - so, filemap_fdatawrite may fail with a no information for a userspace application even if we request a write to non-locked area. Fix this by writing directly to the server and then breaking oplock level from level2 to None. Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS and SMB2 protocols. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
that solution has data races and can end up two identical writes to the server: when clientCanCacheAll value can be changed during the execution of __generic_file_aio_write. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 12 12月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
If we have a read oplock and set a read lock in it, we can't write to the locked area - so, filemap_fdatawrite may fail with a no information for a userspace application even if we request a write to non-locked area. Fix this by populating the page cache without marking affected pages dirty after a successful write directly to the server. Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS and SMB2 protocols. Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 08 12月, 2012 2 次提交
-
-
由 Pavel Shilovsky 提交于
by using cifs_invalidate_mapping rather than invalidate_remote_inode in cifs_oplock_break - this invalidates all inode pages and resets fscache cookies. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
We don't need to permit a write to the area locked with a read lock by any process including the process that issues the write. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 06 12月, 2012 4 次提交
-
-
由 Pavel Shilovsky 提交于
If we netogiate mandatory locking style, have a read lock and try to set a write lock we end up with a write lock in vfs cache and no lock in cifs lock cache - that's wrong. Fix it by returning from cifs_setlk immediately if a error occurs during setting a lock. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
that reacquires byte-range locks when a file is reopened. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Pavel Shilovsky 提交于
Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 28 11月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
Commit eddb079d created a regression in the writepages codepath. Previously, whenever it needed to check the size of the file, it did so by consulting the inode->i_size field directly. With that patch, the i_size was fetched once on entry into the writepages code and that value was used henceforth. If the file is changing size though (for instance, if someone is writing to it or has truncated it), then that value is likely to be wrong. This can lead to data corruption. Pages past the EOF at the time that the writepages call was issued may be silently dropped and ignored because cifs_writepages wrongly assumes that the file must have been truncated in the interim. Fix cifs_writepages to properly fetch the size from the inode->i_size field instead to properly account for this possibility. Original bug report is here: https://bugzilla.kernel.org/show_bug.cgi?id=50991Reported-and-Tested-by: NMaxim Britov <ungifted01@gmail.com> Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
Move actual pte filling for non-linear file mappings into the new special vma operation: ->remap_pages(). Filesystems must implement this method to get non-linear mapping support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 9月, 2012 1 次提交
-
-
由 Pavel Shilovsky 提交于
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 25 9月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
FL_CLOSE is quite common when you close a file on which you hold a lock. The spurious "Unknown lock flags" message in cFYI is confusing in this case. Reported-by: NAlexander Bokovoy <abokovoy@redhat.com> Signed-off-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-