- 21 2月, 2008 7 次提交
-
-
由 Michael Buesch 提交于
This fixes the SSB watchdog access for devices without a chipcommon. These devices have the watchdog on the extif. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the baud settings for new devices like the Linksys WRT350n. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Miller 提交于
'u64' is not necessarily 'unsigned long long' drivers/net/wireless/ath5k/base.c: In function 'ath5k_beacon_update_timers': drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/base.c:2130: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/ath5k/base.c: In function 'ath5k_intr': drivers/net/wireless/ath5k/base.c:2391: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
sparse sees int -> bool cast as an error: hw.c:3754:10: warning: cast truncates bits from constant value (ffffffea becomes 0) Fix it by converting the rettype to int and check appropriately. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
Omitted lock causes sparse warning drivers/net/wireless/ath5k/base.c:1682:1: warning: context imbalance in 'ath5k_tasklet_rx' - different lock contexts for basic block Add the lock to the guilty fail path. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NNick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Based on report from Cavan Carroll <cavancarroll@hotmail.com>: http://bugzilla.kernel.org/show_bug.cgi?id=9863 Cc: Cavan Carroll <cavancarroll@hotmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo Couckuyt 提交于
Retarget of an old patch against prism54usb in linux-wireless archive: http://marc.info/?l=linux-wireless&m=117449935810254&w=2 Cc: Ivo Couckuyt <iv0co@yahoo.co.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 2月, 2008 15 次提交
-
-
由 Denis V. Lunev 提交于
release_net is missed on the error path in pneigh_lookup. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This counter is currently write-only. Drawing an analogy with the similar tcp counter, I think that this one should be pointed by the sockets_allocated members of sctp_prot and sctpv6_prot. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
When deleting the veth driver, veth_close calls netif_carrier_off for the two extremities of the network device. netif_carrier_off on the peer device will fire an event and hold a reference on the peer device. Just after, the peer is unregistered taking the rtnl_lock while the linkwatch_event is scheduled. If __linkwatch_run_queue does not occurs before the unregistering, unregister_netdevice will wait for the dev refcount to reach zero holding the rtnl_lock and linkwatch_event will wait for the rtnl_lock and hold the dev refcount. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
From: Matheos Worku <Matheos.Worku@Sun.COM> 1) niu_enable_alt_mac() needs to be adjusted so that the mask is computed properly for the BMAC case. 2) BMAC has 6 alt MAC addresses available, not 7. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As reported by David Woodhouse <dwmw2@infradead.org>, using u_int32_t in struct nf_inet_addr breaks the busybox build. Fix by using __u32. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
The host address parts need to be converted to host-endian first before arithmetic makes any sense on them. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
By allocating ->hinfo, we already have the needed indirection to cope with the per-cpu xtables struct match_entry. [Patrick: do this now before the revision 1 struct is used by userspace] Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert P. J. Day 提交于
Since the header file xt_policy.h tests __KERNEL__, it should be unifdef'ed before exporting to userspace. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joonwoo Park 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=9920 The function skb_make_writable returns true or false. Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The int ret variable is used only to trigger the BUG_ON() after the skb_copy_bits() call, so check the call failure directly and drop the variable. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As reported by Tomas Simonaitis <tomas.simonaitis@gmail.com>, inserting new data in skbs queued over {ip,ip6,nfnetlink}_queue triggers a SKB_LINEAR_ASSERT in skb_put(). Going back through the git history, it seems this bug is present since at least 2.6.12-rc2, probably even since the removal of skb_linearize() for netfilter. Linearize non-linear skbs through skb_copy_expand() when enlarging them. Tested by Thomas, fixes bugzilla #9933. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Unless I miss a guaranteed relation between between "f" and "new_fa->fa_info" this patch is required for fixing a NULL dereference introduced by commit a6501e08 ("[IPV4] FIB_HASH: Reduce memory needs and speedup lookups") and spotted by the Coverity checker. Eric Dumazet says: Hum, you are right, kmem_cache_free() doesnt allow a NULL object, like kfree() does. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
The Coverity checker spotted that less memory than required was allocated. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
IFLA_LINK is no longer a write-only attribute on the kernel side and must thus be validated. Same goes for the newly introduced IFLA_LINKINFO. Fixes undefined behaviour if either of the attributes are not well formed. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jorge Boncompte [DTI2] 提交于
Commit a0a400d7 ("[NET]: dev_mcast: add multicast list synchronization helpers") from you introduced a new field "da_synced" to struct dev_addr_list that is not properly initialized to 0. So when any of the current users (8021q, macvlan, mac80211) calls dev_mc_sync/unsync they mess the address list for both devices. The attached patch fixed it for me and avoid future problems. Signed-off-by: NJorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2008 8 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matheos Worku 提交于
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: NMatheos Worku <matheos.worku@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Add missing structure kernel-doc descriptions to sock.h & skbuff.h to fix kernel-doc warnings. (I think that Stephen H. sent a similar patch, but I can't find it. I just want to kill the warnings, with either patch.) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The result of the ip_route_output is not assigned to skb. This means that - it is leaked - possible OOPS below dereferrencing skb->dst - no ICMP message for this case Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
hci conn child devices other than rfcomm tty should not be moved here. This is my lost, thanks for Barnaby's reporting and testing. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Young 提交于
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Patrick McHardy notes that print_mac() can get invoked even if the result it unused (f.e. as an argument to pr_debug() when DEBUG is not defined). Mark this function as "__pure" to eliminate this problem. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2008 10 次提交
-
-
由 David S. Miller 提交于
net/bluetooth/hci_sysfs.c: In function ‘del_conn’: net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
MAC_FMT is no longer used Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Remove direct use of MAC_FMT Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Keep ordering of policy entries with same selector in xfrm_dst_hash_transfer(). Issue should not appear in usual cases because multiple policy entries with same selector are basically not allowed so far. Bug was pointed out by Sebastien Decugis <sdecugis@hongo.wide.ad.jp>. We could convert bydst from hlist to list and use list_add_tail() instead. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NSebastien Decugis <sdecugis@hongo.wide.ad.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 S.Çağlar Onur 提交于
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So following patch implements usage of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly Signed-off-by: NS.Çağlar Onur <caglar@pardus.org.tr> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wang Chen 提交于
Rusty hardcoded the old module code. We can remove it now. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Everything that is called from netlbl_init() can be marked with __init. This moves 620 bytes from .text section to .text.init one. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Turning them to array and registration in a loop saves 80 lines of code and ~300 bytes from text section. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
According to some OOPS reports ax25_kick tries to clone NULL skbs sometimes. It looks like a race with ax25_clear_queues(). Probably there is no need to add more than a simple check for this yet. Another report suggested there are probably also cases where ax25 ->paclen == 0 can happen in ax25_output(); this wasn't confirmed during testing but let's leave this debugging check for some time. Reported-and-tested-by: NJann Traschewski <jann@gmx.de> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kris Katterjohn 提交于
Signed-off-by: NKris Katterjohn <katterjohn@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-