- 13 2月, 2007 5 次提交
-
-
由 OGAWA Hirofumi 提交于
This just cleans up. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 OGAWA Hirofumi 提交于
MMCONFIG_APER_XXX is unneeded in arch/x86_64/pci/mmconfig.c. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 OGAWA Hirofumi 提交于
This rejects broken MCFG tables on Asus. When the table looks bogus just disable mmconfig Arjan and Andi suggested this. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 OGAWA Hirofumi 提交于
Current mmconfig has some problems of remapped range. a) In the case of broken MCFG tables on Asus etc., we need to remap 256M range, but currently only remap 1M. b) The base address always corresponds to bus number 0, but currently we are assuming it corresponds to start bus number. This patch fixes the above problems. (akpm: Arjan suggests that if the MCFG table is broken we just shouldn't use it, rather than try to work around things). Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Olivier Galibert 提交于
i386 and x86-64 pci mmconfig code have a lot in common. So share what's shareable between the two. Signed-off-by: NOlivier Galibert <galibert@pobox.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 03 2月, 2007 1 次提交
-
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 14 11月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
This reverts 4c6e052a commit. Following Linus' i386 change: revert resource reservation for mmcfg config now. Will be revisited in .20 hopefully.
-
- 28 10月, 2006 1 次提交
-
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 10月, 2006 1 次提交
-
-
由 Corey Minyard 提交于
The arch/x86_64/pci directory was giving problems in a wierd cross-compile environment. The exact cause is unknown, but the Makefile used CFLAGS instead of EXTRA_CFLAGS. From what I can tell from Documentation/kbuild/makefiles.txt, CFLAGS should not be used for this, it should be EXTRA_CFLAGS. And it solves the cross-compile problem. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 26 9月, 2006 6 次提交
-
-
由 Andi Kleen 提交于
Saves about 200 bytes of code space. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Cc: gregkh@suse.de Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Aaron Durbin 提交于
On Sat, Sep 09, 2006 at 04:14:29PM +0200, Andi Kleen wrote: > [patch] Looks reasonable, but probably not for 2.6.18 because this stuff > is already too fragile and it is probably too risky to do any big changes now > since not enough testing time is left. Can you please resubmit > it with proper description and signed-off-by line? I can queue it for .19 then > > -Andi Patch inserts PCI memory mapped config region(s) into the resource map. This will allow for the MMCCONFIG regions to be marked as busy in the iomem address space as well as the regions(s) showing up in /proc/iomem. Signed-off-by: NAaron Durbin <adurbin@google.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Needs earlier patch to split type 1 probing from use. This patch should fix the x86 macs where type 1 PCI config space access doesn't work, but MCFG does. They also don't have a usable e820 table so the e820 sanity check failed. Instead assume now that if type 1 doesn't work then MCFG must work and don't do the e820 check. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
First probe if type1/2 accesses work, but then only initialize them at the end. This is useful for a later patch that needs this information inbetween. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Brice Goglin 提交于
Make an mmconfig warning print the bus id with a regular format. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 19 9月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commits 11012d41 and 40dd2d20, which allowed us to use the MMIO accesses for PCI config cycles even without the area being marked reserved in the e820 memory tables. Those changes were needed for EFI-environment Intel macs, but broke some newer Intel 965 boards, so for now it's better to revert to our old 2.6.17 behaviour and at least avoid introducing any new breakage. Andi Kleen has a set of patches that work with both EFI and the broken Intel 965 boards, which will be applied once they get wider testing. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 8月, 2006 2 次提交
-
-
由 Andi Kleen 提交于
As a replacement for the earlier removal of the e820 MCFG check we blacklist the Intel SDV with the original BIOS bug that motivated that check. On those machines don't use MMCONFIG. This also adds a new pci=mmconf parameter to override the blacklist. Cc: Greg KH <gregkh@suse.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The check for the MCFG table being reserved in the e820 map was originally added to detect a broken BIOS in a preproduction Intel SDV. However it also breaks the Apple x86 Macs, which can't supply this properly, but need a working MCFG. With this patch they wouldn't use the MCFG and not work. After some discussion I think it's best to remove the heuristic again. It also failed on some other boxes (although it didn't cause much problems there because old style port access for PCI config space still works as fallback), but the preproduction SDVs can just use pci=nommcfg. Supporting production machines properly is more important. Edgar Hucek did all the debugging work. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Edgar Hucek <hostmaster@ed-soft.at> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 7月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
As Travis Betak points out it accesses the wrong northbridge subfunction now. Switch back to the old code. Cc: "Travis Betak" <betak@mpdtxmail.amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
- Factor out the duplicated access/cache code into a single file * Shared between i386/x86-64. - Share flush code between AGP and IOMMU * Fix a bug: AGP didn't wait for end of flush before - Drop 8 northbridges limit and allocate dynamically - Add lock to serialize AGP and IOMMU GART flushes - Add PCI ID for next AMD northbridge - Random related cleanups The old K8 NUMA discovery code is unchanged. New systems should all use SRAT for this. Cc: "Navin Boppuri" <navin.boppuri@newisys.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2006 1 次提交
-
-
由 Chuck Ebbert 提交于
On 15 Jun 2006 03:45:10 +0200, Andi Kleen wrote: > Anyways I would say that if the BIOS can't get MCFG right then > it's likely not been validated on that board and shouldn't be used. According to Petr Vandrovec: ... "What is important (and checked) is address of MMCONFIG reported by MCFG table... Unfortunately code does not bother with printing that address :-( "Another problem is that code has hardcoded that MMCONFIG area is 256MB large. Unfortunately for the code PCI specification allows any power of two between 2MB and 256MB if vendor knows that such amount of busses (from 2 to 128) will be sufficient for system. With notebook it is quite possible that not full 8 bits are implemented for MMCONFIG bus number." So here is a patch. Unfortunately my system still fails the test because it doesn't reserve any part of the MMCONFIG area, but this may fix others. Booted on x86_64, only compiled on i386. x86_64 still remaps the max area (256MB) even though only 2MB is checked... but 2.6.16 had no check at all so it is still better. PCI: reduce size of x86 MMCONFIG reserved area check 1. Print the address of the MMCONFIG area when the test for that area being reserved fails. 2. Only check if the first 2MB is reserved, as that is the minimum. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 4月, 2006 2 次提交
-
-
由 Andi Kleen 提交于
Surprising that it still worked at all with this - yes it was tested. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Nobody should pass NULL here. Could in theory make it a BUG, but the NULL pointer oops will do as well. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 4月, 2006 3 次提交
-
-
由 Andi Kleen 提交于
Mostly to get better handling when a extended config space access has to fallback to Type1. Cc: gregkh@suse.de Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Previously only the first bus would be checked against Type 1. Why 16? Checking all would need too much memory and we can assume that systems with more than 16 busses have better than average quality BIOS. This is an additional defense against bad MCFG tables. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
This patch introduces a user for the e820_all_mapped function: There have been several machines that don't have a working MMCONFIG, often because of a buggy MCFG table in the ACPI bios. This patch adds a simple sanity check that detects a whole bunch of these cases, and when it detects it, linux now boots rather than crash-and-burns. The accuracy of this detection can in principle be improved if there was a "is this entire range in e820 with THIS attribute", but no such function exist and the complexity needed for this is not really worth it; this simple check already catches most cases anyway. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 3月, 2006 2 次提交
-
-
由 Akinobu Mita 提交于
While working on these patch set, I found several possible cleanup on x86-64 and ia64. akpm: I stole this from Andi's queue. Not only does it clean up bitops. It also unrelatedly changes the prototype of pci_mmcfg_init() and removes its arch_initcall(). It seems that the wrong two patches got joined together, but this is the one which has been tested. This patch fixes the current x86_64 build error (the pci_mmcfg_init() declaration in arch/i386/pci/pci.h disagrees with the definition in arch/x86_64/pci/mmconfig.c) This also means that x86_64's pci_mmcfg_init() gets called in the same (new) manner as x86's: from arch/i386/pci/init.c:pci_access_init(), rather than via initcall. The bitops cleanups came along for free. All this worked OK in -mm testing (since 2.6.16-rc4-mm1) because x86_64 was tested with both patches applied. Signed-off-by: NAkinobu Mita <mita@miraclelinux.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Con Kolivas <kernel@kolivas.org> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
I moved it to a separate function which is safer. This avoids problems with the linker reordering them and the less useful PCI config space access methods taking priority over the better ones. Fixes some problems with broken MMCONFIG Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 2月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 05 2月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
I broke this earlier when moving the patch from i386 to x86-64. Need to return the virtual address here, not the physical address. This fixes some boot time crashes on x86-64. Cc: gregkh@suse.de Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 2月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
Handle more bogus MCFG entries Some Asus P4 boards seem to have broken MCFG tables with only a single entry for busses 0-0. Special case these and assume they mean all busses can be accessed. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 1月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
This was a backup file that somehow made it into the official tree. Never used for anything. Remove. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 12月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
Now needs to include the type 1 functions ("direct") too. Reported by Pavel Roskin <proski@gnu.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 12月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2005 2 次提交
-
-
由 Andi Kleen 提交于
They report all busses as MMCONFIG capable, but it never works for the internal devices in the CPU's builtin northbridge. It just probes all func 0 devices on bus 0 (the internal northbridge is currently always on bus 0) and if they are not accessible using MCFG they are put into a special fallback bitmap. On systems where it isn't we assume the BIOS vendor supplied correct MCFG. Requires the earlier patch for mmconfig type1 fallback Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
When there is no entry for a bus in MCFG fall back to type1. This is especially important on K8 systems where always some devices can't be accessed using mmconfig (in particular the builtin northbridge doesn't support it for its own devices) Cc: <gregkh@suse.de> Cc: <jgarzik@pobox.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 9月, 2005 2 次提交
-
-
由 Andi Kleen 提交于
Since this is shared code I had to implement it for i386 too Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Now that Greg implemented MCFG/_SEG support this shouldn't be needed anymore Cc: gregkh@suse.de Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 8月, 2005 1 次提交
-
-
由 Len Brown 提交于
Delete the ability to build an ACPI kernel that does not include PCI support. When such a machine is created and it requires a tuned kernel, send a patch. http://bugzilla.kernel.org/show_bug.cgi?id=1364Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 24 8月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
The code to detect IO links on Opteron would not check if the node had actually memory. This could lead to pci_bus_to_node returning an invalid node, which might cause crashes later when dma_alloc_coherent passes it to page_alloc_node(). The bug has been there forever but for some reason it is causing now crashes. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-