Make amdgpu the owner of all per-pipe state of the HQDs.

This change will allow us to split the queues between kfd and amdgpu
with a queue granularity instead of pipe granularity.

This patch fixes kfd allocating an HDP_EOP region for its 3 pipes which
goes unused.

v2: support for gfx9
v3: fix gfx7 HPD intitialization
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename straggler instances of r(adeon)dev to a(mdgpu)dev
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the same gfx_*_mqd_commit function for kfd and amdgpu codepaths.

This removes the last duplicates of this programming sequence.

v2: fix cp_hqd_pq_wptr value
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Handle HQD deactivation timeouts instead of ignoring them.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The MQD programming sequence currently exists in 3 different places.
Refactor it to absorb all the duplicates.

The success path remains mostly identical except for a slightly
different order in the non-kiq case. This shouldn't matter if the HQD
is disabled.

The error handling paths have been updated to deal with the new code
structure.

v2: the non-kiq path for gfxv8 was dropped in the rebase
v3: split MEC_HPD_SIZE rename, dropped doorbell changes
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename MEC_HPD_SIZE to GFXN_MEC_HPD_SIZE to clarify it is specific to a
gfx generation.
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

AI affected:

CP/HW team requires KMD insert FRAME_CONTROL(end) after
the last IB and before the fence of this DMAframe.

this is to make sure the cache are flushed, and it's a must
change no matter MCBP/SR-IOV or bare-metal case because new
CP hw won't do the cache flush for each IB anymore, it just
leaves it to KMD now.

with this patch, certain MCBP hang issue when rendering
vulkan/chained-ib are resolved.

v2: drop gfx8 changes.  gfx8 is not affected (Alex)
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

According to CP/hw team requirment, to support PAL/CHAINED-IB
MCBP, kernel driver must guarantee DE_META must be inserted
right prior to the work_load DE IB (with PREEMPT flag), there
cannot be any non-work_load DE IB between-in DE_META and
work_load DE IB.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The usage of kiq should not depend on the virtualization.
Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: NAndres Rodriquez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for MCBP/Virtualization in combination with chained IBs is
formal released on firmware feature version #46. So enable it
according to firmware feature version, otherwise, world switch will
hang.
Signed-off-by: NTrigger Huang <trigger.huang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bug: SWDEV-117987: Always on CU mask broken for gfx7+
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I'm not sure if the order matters, but it seems like it makes
more sense to set this after the range is programmed.

v2: rebase (Alex)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add set_doorbell functions for mec and cpg.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This could be used in Andres' priority scheduling patch
as well.
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if we disable clockgating, we still need to make sure the
cp/rlc interrupts are enabled for powergating which might still
be enabled.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's global, not queue specific, so move it out of the
kiq register init function.
Tested-and-Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to reset the wptr and clear the rings.  The UNMAP_QUEUES
packet writes the current MQD state back the MQD on suspend,
so there is no need to reset it as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the UNMAP_QUEUES packet to have the KIQ properly
disable them.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than open coding them.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As the KCQ setup.  This way we only have to wait once for the
entire MEC.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than waiting for each queue.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

One for KIQ and one for the KCQ. This simplifies the logic and
allows for future optimizations.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to make sure the various init sequences submitted
to KIQ complete before testing the rings.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

KIQ is the Kernel Interface Queue for managing the MEC.  Rather than setting
up rings via direct MMIO of ring registers, the rings are configured via
special packets sent to the KIQ.  The allows the MEC to better manage shared
resources and certain power events.

v2: squash in s3/s4 fix from Rex
v3: further fixes from Rex
Signed-off-by: NDavid Panariti <David.Panariti@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing chips to the doorbell range setup.  These
were missed in the KIQ code.  Fixes power and performance
regressions with KIQ.  Spotted by Rex.
Tested-and-Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to properly set the MTYPE and ROQ space setting.
This should fix performance regressions with KIQ enabled.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new RIDs.
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some of these paths probably cannot be interrupted by a signal anyway.
Those that can would fail to clean up things if they actually got
interrupted.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This way GFX and MM won't fight for VMIDs any more.

Initially disabled since we need to stop flushing all HUBS
at the same time as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clean up a toggle with ?:.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Swap read/write pattern for WREG32_FIELD()
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Swap read/write pattern for WREG32_FIELD()
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use new WREG32_FIELD_OFFSET() to clean up code.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>