- 07 6月, 2017 8 次提交
-
-
由 Niklas Cassel 提交于
stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: NAlexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Max Filippov 提交于
ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Reviewed-by: NTobias Klauser <tklauser@distanz.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugeniu Rosca 提交于
Commit a47b70ea ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb072 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea ("ravb: unmap descriptors when freeing rings") Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Haines 提交于
When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by: NRichard Haines <richard_c_haines@btinternet.com> Acked-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NHuw Davies <huw@codeweavers.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The current comparison of entry < 0 will never be true since entry is an unsigned integer. Make entry an int to ensure -ve error return values from the call to jumbo_frm are correctly being caught. Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2017-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 It has been a slow start of cycle and this the first set of fixes for 4.12. Nothing really major here. wcn36xx * fix an issue with module reload brcmfmac * fix aligment regression on 64 bit systems iwlwifi * fixes for memory leaks, runtime PM, memory initialisation and other smaller problems * fix IBSS on devices using DQA mode (7260 and up) * fix the minimum firmware API requirement for 7265D, 3168, 8000 and 8265 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-06-06 This series contains fixes to i40e and i40evf only. Mauro S. M. Rodrigues fixes a flood in the kernel log which was introduced in a previous commit because of a mistaken substitution of __I40E_VSI_DOWN instead of __I40E_DOWN when testing the state of the PF. Björn Töpel fixes an issue introduced in a previous commit where the offset was incorrect and could lead to data corruption for architectures using PAGE_SIZE larger than 8191. Fixed the issue by updating the page_offset correctly using the proper setting for truesize. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 6月, 2017 14 次提交
-
-
由 David S. Miller 提交于
This reverts commit b699d003. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Björn Töpel 提交于
In f8b45b74 ("i40e/i40evf: Use build_skb to build frames") i40e_build_skb updates the page_offset field with an incorrect offset, which can lead to data corruption. This patch updates page_offset correctly, by properly setting truesize. Note that the bug only appears on architectures where PAGE_SIZE is 8192 or larger. Fixes: f8b45b74 ("i40e/i40evf: Use build_skb to build frames") Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mauro S. M. Rodrigues 提交于
Commit 0da36b97 ("i40e: use DECLARE_BITMAP for state fields") introduced changes in the way i40e works with state flags converting them to bitmaps using kernel bitmap API. This change introduced a regression due to a mistaken substitution using __I40E_VSI_DOWN instead of __I40E_DOWN when testing state of a PF at i40e_reset_subtask() function. This caused a flood in the kernel log with the follow message: [49.013] i40e 0002:01:00.0: bad reset request 0x00000020 Commit d19cb64b ("i40e: separate PF and VSI state flags") also introduced some misuse of the VSI and PF flags, so both could be considered as the offenders. This patch simply fixes the flags where it makes sense by changing __I40E_VSI_DOWN to __I40E_DOWN. Fixes: 0da36b97 ("i40e: use DECLARE_BITMAP for state fields") Fixes: d19cb64b ("i40e: separate PF and VSI state flags") Reviewed-by: N"Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Signed-off-by: N"Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kalle Valo 提交于
Merge tag 'iwlwifi-for-kalle-2017-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fixes for 4.12: * Some memory leaks; * IBSS support; * Some bugzilla bugs; * Some runtime PM fixes; * Rate-scaling issues; * Some locking problems;
-
由 Shahar S Matityahu 提交于
Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1 ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Liad Kaufman 提交于
Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b873 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Haim Dreyfuss 提交于
During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Gregory Greenman 提交于
Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 05 6月, 2017 14 次提交
-
-
由 Ido Shamay 提交于
The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5 ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c: ..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features' ..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haishuang Yan 提交于
We must free allocated skb when genlmsg_put() return fails. Fixes: 1555d204 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anmol Sarma 提交于
Update tcp.txt to fix mandatory congestion control ops and default CCA selection. Also, fix comment in tcp.h for undo_cwnd. Signed-off-by: NAnmol Sarma <me@anmolsarma.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Talat Batheesh 提交于
Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c55768 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: NOr Gerlitz <gerlitz.or@gmail.com> Signed-off-by: NTalat Batheesh <talatb@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Acked-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haishuang Yan 提交于
Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NSasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By: NLorenzo Colitti <lorenzo@google.com> Tested-By: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Commit 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Garver 提交于
Since commit 9b4437a5 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by: NEric Garver <e@erig.me> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Soheil Hassas Yeganeh 提交于
Prior to f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by: NCyril Hrubis <chrubis@suse.cz> Tested-by: NCyril Hrubis <chrubis@suse.cz> Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Hocko 提交于
xgbe_map_rx_buffer is rather confused about what PAGE_ALLOC_COSTLY_ORDER means. It uses PAGE_ALLOC_COSTLY_ORDER-1 assuming that PAGE_ALLOC_COSTLY_ORDER is the first costly order which is not the case actually because orders larger than that are costly. And even that applies only to sleeping allocations which is not the case here. We simply do not perform any costly operations like reclaim or compaction for those. Simplify the code by dropping the order calculation and use PAGE_ALLOC_COSTLY_ORDER directly. Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liam McBirnie 提交于
ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: NLiam McBirnie <liam.mcbirnie@boeing.com> Acked-by: NPeter Dawson <peter.a.dawson@boeing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: NManoj Iyer <manoj.iyer@canonical.com> Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2017 4 次提交
-
-
由 Michael S. Tsirkin 提交于
commit d85b758f ("virtio_net: fix support for small rings") was supposed to increase the buffer size for small rings but had an unintentional side effect of decreasing it for large rings. This seems to break some setups - it's not yet clear why, but increasing buffer size back to what it was before helps. Fixes: d85b758f ("virtio_net: fix support for small rings") Reported-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: N"J. Bruce Fields" <bfields@fieldses.org> Tested-by: NMikulas Patocka <mpatocka@redhat.com> Tested-by: N"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chopra, Manish 提交于
Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: NManish Chopra <manish.chopra@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Bloch 提交于
Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Acked-by: NJiri Benc <jbenc@redhat.com> Tested-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NMark Bloch <markb@mellanox.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
The original author left the project and so far has not responded to emails sent to the listed address. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-