Implement filters for Layer 3 and Layer 4 using TC Flower API. Add the
corresponding callbacks in XGMAC core.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev_kfree_skb() function performs also input parameter validation.
Thus the test around the shown calls is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds the logic to insert a given VLAN ID in a packet. This is offloaded
to HW and its descriptor based. For now, only XGMAC implements the
necessary callbacks.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the support for Source Address Insertion and Replacement in XGMAC
cores. Two methods are supported: Descriptor based and register based.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a counter that increments each time a packet with split header is
received.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the support for Split Header feature in the RX path and enable it in
XGMAC cores.

This does not impact neither beneficts bandwidth but it does reduces CPU
usage because without the feature all the entire packet is memcpy'ed,
while that with the feature only the header is.

With Split Header disabled 'perf stat -d' gives:
86870.624945 task-clock (msec)      #    0.429 CPUs utilized
     1073352 context-switches       #    0.012 M/sec
           1 cpu-migrations         #    0.000 K/sec
         213 page-faults            #    0.002 K/sec
327113872376 cycles                 #    3.766 GHz (62.53%)
 56618161216 instructions           #    0.17  insn per cycle (75.06%)
 10742205071 branches               #  123.658 M/sec (75.36%)
   584309242 branch-misses          #    5.44% of all branches (75.19%)
 17594787965 L1-dcache-loads        #  202.540 M/sec (74.88%)
  4003773131 L1-dcache-load-misses  #   22.76% of all L1-dcache hits (74.89%)
  1313301468 LLC-loads              #   15.118 M/sec (49.75%)
   355906510 LLC-load-misses        #   27.10% of all LL-cache hits (49.92%)

With Split Header enabled 'perf stat -d' gives:
49324.456539 task-clock (msec)     #    0.245 CPUs utilized
     2542387 context-switches      #    0.052 M/sec
           1 cpu-migrations        #    0.000 K/sec
         213 page-faults           #    0.004 K/sec
177092791469 cycles                #    3.590 GHz (62.30%)
 68555756017 instructions          #    0.39  insn per cycle (75.16%)
 12697019382 branches              #  257.418 M/sec (74.81%)
   442081897 branch-misses         #    3.48% of all branches (74.79%)
 20337958358 L1-dcache-loads       #  412.330 M/sec (75.46%)
  3820210140 L1-dcache-load-misses #   18.78% of all L1-dcache hits (75.35%)
  1257719198 LLC-loads             #   25.499 M/sec (49.73%)
   685543923 LLC-load-misses       #   54.51% of all LL-cache hits (49.86%)

Changes from v2:
	- Reword commit message (Jakub)
Changes from v1:
	- Add performance info (David)
	- Add misssing dma_sync_single_for_device()
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to add Split Header support, stmmac_rx() needs to take into
account that packet may be split accross multiple descriptors.

Refactor the logic of this function in order to support this scenario.

Changes from v2:
	- Fixup if condition detection (Jakub)
	- Don't stop NAPI with unfinished packet (Jakub)
	- Use napi_alloc_skb() (Jakub)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TX Timestamp in XGMAC comes from MAC instead of descriptors. Implement
this in a new callback.

Also, RX Timestamp in XGMAC must be cheked against corruption and we need
a barrier to make sure that descriptor fields are read correctly.

Changes from v2:
	- Rework return code check (Jakub)
Changes from v1:
	- Rework the get timestamp function (David)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Because we don't care about the individual files, we can remove the
stored dentry for the files, as they are not needed to be kept track of
at all.

Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the VLAN Hash Filtering feature in XGMAC core.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the RSS functionality and add the corresponding callbacks in
XGMAC core.

Changes from v1:
	- Do not use magic constants (Jakub)
	- Use ethtool_rxfh_indir_default() (Jakub)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This variant of netif_napi_add() should be used from drivers
using NAPI to exclusively poll a TX queue.
Signed-off-by: NFrode Isaksen <fisaksen@baylibre.com>
Tested-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With recent changes that introduced support for Page Pool in stmmac, Jon
reported that NFS boot was no longer working on an ARM64 based platform
that had the IP behind an IOMMU.

As Page Pool API does not guarantee DMA syncing because of the use of
DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon
re-allocation because we are always re-using same pages.

In fact, ARM64 code invalidates the DMA area upon two situations [1]:
	- sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE
	- sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE

So, as we must invalidate both the current RX buffer and the newly allocated
buffer we propose this fix.

[1] arch/arm64/mm/cache.S
Reported-by: NJon Hunter <jonathanh@nvidia.com>
Tested-by: NJon Hunter <jonathanh@nvidia.com>
Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Tested-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC.

Let's allow this speed by default.
Reported-by: NOndrej Jirman <megi@xff.cz>
Tested-by: NOndrej Jirman <megi@xff.cz>
Fixes: 5b0d7d7d ("net: stmmac: Add the missing speeds that XGMAC supports")
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need the memory to be zeroed upon allocation so use kcalloc()
instead.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RX Descriptors are being cleaned after setting the buffers which may
lead to buffer addresses being wiped out.

Fix this by clearing earlier the RX Descriptors.

Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.

This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.

Remove tc_block_offload alias.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.

This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.

This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.

This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.

There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. get hash table size in hw feature reigster, and add support
for taller hash table(128/256) in dwmac4.
2. only clear GMAC_PACKET_FILTER bits used in this function,
to avoid side effect to functions of other bits.

stmmac selftests output log with flow control on:
	ethtool -t eth0
	The test result is PASS
	The test extra info:
	 1. MAC Loopback                 0
	 2. PHY Loopback                 -95
	 3. MMC Counters                 0
	 4. EEE                          -95
	 5. Hash Filter MC               0
	 6. Perfect Filter UC            0
	 7. MC Filter                    0
	 8. UC Filter                    0
	 9. Flow Control                 0
Signed-off-by: NBiao Huang <biao.huang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mapping and unmapping DMA region is an high bottleneck in stmmac driver,
specially in the RX path.

This commit introduces support for Page Pool API and uses it in all RX
queues. With this change, we get more stable troughput and some increase
of banwidth with iperf:
	- MAC1000 - 950 Mbps
	- XGMAC: 9.22 Gbps

Changes from v3:
	- Use page_pool_destroy() (Ilias)
Changes from v2:
	- Uncoditionally call page_pool_free() (Jesper)
Changes from v1:
	- Use page_pool_get_dma_addr() (Jesper)
	- Add a comment (Jesper)
	- Add page_pool_free() call (Jesper)
	- Reintroduce sync_single_for_device (Arnd / Ilias)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for coalescing RX path by specifying number of frames which
don't need to have interrupt on completion bit set.

This is only available when RX Watchdog is enabled.
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:
	"This is the wrong place to change the queue mapping.
	stmmac_xmit() is called with a specific TX queue locked,
	and accessing a different TX queue results in a data race
	for all of that queue's state.

	I think this commit should be reverted upstream and in all
	stable branches.  Instead, the driver should implement the
	ndo_select_queue operation and override the queue mapping there."

Fixes: c5acdbee ("net: stmmac: Send TSO packets always from Queue 0")
Suggested-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only disable the interrupts if RX NAPI gets to be scheduled. Also,
schedule the TX NAPI only when the interrupts are disabled.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the RX Tail Pointer to the last available SKB entry.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, stmmac only supports 32 bits addressing for SKB. Enable the
support for upto 48 bits addressing in XGMAC core.

This avoids the use of bounce buffers and increases performance.

Changes from v1:
	- Fallback to 32 bits in failure (Andrew)
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a performance killer and anyways the interrupts are being
disabled by RX NAPI so no need to disable them again.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XGMAC supports following speeds:
	- 10G XGMII
	- 5G XGMII
	- 2.5G XGMII
	- 2.5G GMII
	- 1G GMII
	- 100M MII
	- 10M MII

Add them to the stmmac driver.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For performance reasons decrease the default RX Watchdog value for the
minimum allowed.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not enable EEE feature in the PHY if MAC does not support it.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some DT bindings do not have the PHY handle. Let's fallback to manually
discovery in case phylink_of_phy_connect() fails.

Changes from v1:
	- Fixup comment style (Sergei)

Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic")
Reported-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Tested-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the PHY does not support EEE mode, then a crash is observed when the
ethernet interface is enabled. The crash occurs, because if the PHY does
not support EEE, then although the EEE timer is never configured, it is
still marked as enabled and so the stmmac ethernet driver is still
trying to update the timer by calling mod_timer(). This triggers a BUG()
in the mod_timer() because we are trying to update a timer when there is
no callback function set because timer_setup() was never called for this
timer.

The problem is caused because we return true from the function
stmmac_eee_init(), marking the EEE timer as enabled, even when we have
not configured the EEE timer. Fix this by ensuring that we return false
if the PHY does not support EEE and hence, 'eee_active' is not set.

Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When stmmac_eee_init() is called to disable EEE support, then the timer
for EEE support is stopped and we return from the function. Prior to
stopping the timer, a mutex was acquired but in this case it is never
released and so could cause a deadlock. Fix this by releasing the mutex
prior to returning from stmmax_eee_init() when stopping the EEE timer.

Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Tested-by: NThierry Reding <treding@nvidia.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.

This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.

Fixes: f748be53 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: NRoland Hii <roland.king.guan.hii@intel.com>
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When building without CONFIG_OF, we get a harmless build warning:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_phy_setup':
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:973:22: error: unused variable 'node' [-Werror=unused-variable]
  struct device_node *node = priv->plat->phy_node;

Reword it so we always use the local variable, by making it the
fwnode pointer instead of the device_node.

Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of PHYLINK conversion we stopped parsing the phy-handle property
from DT. Unfortunatelly, some wrapper drivers still rely on this phy
node to configure the PHY.

Let's restore the parsing of PHY handle while these wrapper drivers are
not fully converted to PHYLINK.

Fixes: 74371272 ("net: stmmac: Convert to phylink and remove phylib logic")
Reported-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Tested-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert everything to phylink.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Start adding the phylink callbacks.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for the convertion, split the adjust_link function into
mac_config and add the mac_link_up and mac_link_down functions.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details the full gnu general public license is included in
  this distribution in the file called copying

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope [that] it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details the full gnu general public license is included in
  this distribution in the file called copying

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 57 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAlexios Zavras <alexios.zavras@intel.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of devm_alloc_etherdev_mqs() to simplify the code.
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>