Reduce the Twrph0 timing slightly to fit on an SMDK2443. This
should still produce valid timings for the NAND devices as it
is still over the smallest device fitted to these boards.

Signed-off-by: Ben Dooks <(address hidden)>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the IRQ number for watchdog on S3C2443
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Change the name of the S3C2443_SDI1 to S3C2443_HSMMC to ensure
that it is correctly identified.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the clocks missing form HCLKCON back into the set of
clocks being registered at initalisation time.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Include <linux/sysdev.h> in any machines that use the PM functions
which require struct sys_device.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We don't need valid_phys_addr_range() or valid_mmap_phys_addr_range()
for the !CONFIG_MMU case.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the formating of the "CPU part" field to be consistent with
the other fields for pre-ARM7 parts. One tab to many for them to
all line up.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Presently, we check for the minimum ARM architecture that we're
building for to determine whether we need ASID support.  This is
wrong - if we're going to support a range of CPUs which include
ARMv6 or higher, we need the ASID.

Convert the checks to use a new configuration symbol, and arrange
for ARMv6 and higher CPU entries to select it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If DEBUG_LL is enabled, we want to use get_irq_regs(), but this
causes a build error due to the inline function missing.  Add
the necessary header file.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

No need for the cascade irq function to have a "fastcall" annotation.
Fix the range checking for valid IRQ numbers - comparing the value
returned by the GIC with NR_IRQS is meaningless since we translate
the GIC irq number to a Linux IRQ number afterwards.

Check the GIC returned IRQ number is within limits first, then add
the IRQ offset, and only then compare with NR_IRQS.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-omap1/Kconfig:41:warning: 'select' used by config
 symbol 'MACH_OMAP_H3' refers to undefined symbol 'GPIOEXPANDER_OMAP'
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add utimensat, signalfd, timerfd, eventfd syscalls.  Add ignore
defines for sync_file_range and fadvise64_64 which we implement
differently.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Change the SPI Channel 1 register offset in s3c_spi1_resource[], and
s3c2412_dma_mappings[]. Offset has to be 0x100 in s3c2412/13's case.
Also, total SPI memory resource size changed to 0x24 for s3c2412/13.
Signed-off-by: NSandeep Patil <psandeep.s@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

WARNING: arch/arm/mach-iop13xx/built-in.o - Section mismatch: reference to
.init.text:iop13xx_pcie_map_irq from .text between 'iop13xx_pci_setup' (at
offset 0x7fc) and 'iop13xx_map_pci_memory'

While fixing this warning I also recalled Adrian Bunk's recommendation to
not use inline in .c files, as 'iop13xx_map_pci_memory' is needlessly
inlined.

Removing 'inline' uncovered some dead code so that is cleaned up as well.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

updates iop13xx msi support for a msi api change in 2.6.22

rev7:
* update for Michael Ellerman's "MSI: arch must connect the irq and the
  msi_desc" patch
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The Integrator/CP SMP platform support was never fully merged, and now
it's causing build breakage.  Remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

A fix for a really stupid typo in the KS8695 serial driver.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Selects GENERIC_GPIO for ARCH_IXP4XX in Kconfig.

IXP4XX has generic GPIO support; however, ARCH_IXP4XX
Kconfig entry currently does not select GENERIC_GPIO like other
arch entries.
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix compile warnings from sharpsl_pm.c. Attribute registration failure
doesn't stop the driver working so just warn about it.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

oprofile depends on having it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__NR_syscall_max is done in x86_64 asm-offsets; do an equivalent in
uml kern_constants.h
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

it depends on elimination of unreachable branches in switch (by object
size), so we must declare it always_inline
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

.. because video-buf.c requires PCI, and VIDEO_EM28XX selects it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll
end up with unbuildable configs.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

need it for page_private(), not all targets have it pulled indirectly
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Add .gitignore entry for syscalltab.
  sh64: generic quicklist support.
  sh64: Update cayman defconfig.
  sh64: Fixup sh-sci build.
  sh64: ppoll/pselect6() and restartable syscalls.
  sh64: dma-mapping updates.
  sh64: Fixups for the irq_regs changes.
  sh64: Wire up many new syscalls.
  spelling fixes: arch/sh64/
  sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  Use menuconfig objects: IDE
  sl82c105: Switch to ref counting API
  ide: remove ide_use_dma()
  ide: add missing validity checks for identify words 62 and 63
  ide: remove ide_dma_enable()
  sl82c105: add speedproc() method and MWDMA0/1 support
  cs5530/sc1200: add ->speedproc support
  cs5530/sc1200: DMA support cleanup
  ide: use ide_tune_dma() part #2
  cs5530/sc1200: add ->udma_filter methods
  ide: always disable DMA before tuning it
  pdc202xx_new: use ide_tune_dma()
  alim15x3: use ide_tune_dma()
  sis5513: PIO mode setup fixes
  serverworks: PIO mode setup fixes
  pdc202xx_old: rewrite mode programming code (v2)

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  ucc_geth: eliminate max-speed, change interface-type to phy-connection-type
  smc911x: fix compilation breakage
  pasemi_mac: Fix local-mac-address parsing
  pasemi_mac: Terminate PCI ID list
  pasemi_mac: Interrupt ack fixes
  pasemi_mac: Fix register defines

It's not necessarily a very sane configuration, but people running "make
randconfig" noticed it wouldn't compile.  This fixes some obvious
problems in discontig.c to allow a clean compile.
Acked-by: Nandrew hendry <andrew.hendry@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Not sure how this one got missed in the great purge some time ago but it did.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality
and as all users of ide_use_dma() were converted to use ide_tune_dma()
now it is possible to add missing checks to ide_tune_dma() and remove
ide_use_dma() completely, so do it.

There should be no functionality changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Check validity of identify words 62 and 63 before using them in
ide_get_mode_mask().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* check ->speedproc return value in ide_tune_dma()
* use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers
* remove no longer needed ide_dma_enable()
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add the speedproc() method for setting transfer modes, modify config_for_dma()
to call it and use ide_max_dma_mode() to select the best DMA mode.
Add support for the multiword DMA modes 0 and 1, using the upper half of the
'drive_data' field to store the DMA timings to program into the drive control
register when DMA is turned on for real.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* add {cs5530,sc1200}_tunepio() for programming PIO timings

* add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting
  transfer mode and convert {cs5530,sc1200}_config_dma() to use it

* bump driver version
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

sc1200.c:

* remove open-coded variant of ide_dma_host_off() (== ->dma_host_off),
  it is not needed because ->dma_off_quietly calls ->dma_host_off

* use ->dma_host_on (== ide_dma_host_on() for this driver) instead of
  open-coded variant, call it from the users of sc1200_config_dma2()

  [ there is no need to call ->dma_host_on in sc1200_config_dma() because
    core code takes care of calling ->ide_dma_on on successful execution
    of ->ide_dma_check ]

* add comment about ->tuneproc interface abuse

cs5530.c/sc1200.c:

* core code takes care of calling ->dma_off_quietly before calling
  ->ide_dma_check so there is no need to call it in ->ide_dma_check methods

* bump driver version
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>