Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 26 4月, 2007 2 次提交
  3. 04 10月, 2006 1 次提交
  5. 30 8月, 2006 1 次提交
  7. 28 7月, 2006 1 次提交
  9. 06 7月, 2006 1 次提交
    • D
      [PATCH] ZyDAS ZD1211 USB-WLAN driver · e85d0918
      由 Daniel Drake 提交于 
      There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.

Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.

Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.

This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.

This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!

We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite

If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      e85d0918
  11. 06 6月, 2006 1 次提交
  13. 25 4月, 2006 3 次提交
    • Z
      [PATCH] wireless Kconfig add IPW2200_RADIOTAP · 34f8ae46
      由 Zhu Yi 提交于 
      Makefile both IPW2200_RADIOTAP and IPW2200_PROMISCUOUS depend on
IPW2200_MONITOR. Let IPW2200_PROMISCUOUS select IPW2200_RADIOTAP.
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      34f8ae46
    • Z
      [PATCH] ipw2200: rename CONFIG_IPW_QOS to CONFIG_IPW2200_QOS · e43e3c1e
      由 Zhu Yi 提交于 
      Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      e43e3c1e
    • Z
      [PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated · d685b8c2
      由 Zhu Yi 提交于 
      With this patch, a new promiscuous mode is enabled. If the module is loaded
with the rtap_iface=1 module parameter, two interfaces will be created
(instead of just one).

The second interface is prefixed 'rtap' and provides received 802.11 frames
on the current channel to user space in a radiotap header format.

Example usage:

        % modprobe ipw2200 rtap_iface=1
        % iwconfig eth1 essid MyNetwork
        % dhcpcd eth1
        % tcpdump -i rtap0

If you do not specify 'rtap_iface=1' then the rtap interface will
not be created and you will need to turn it on via:

        % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface

You can filter out what type of information is passed to user space via
the rtap_filter sysfs entry.  Currently you can tell the driver to
transmit just the headers (which will provide the RADIOTAP and IEEE
802.11 header but not the payload), to filter based on frame control
type (Management, Control, or Data), and whether to report transmitted
frames, received frames, or both.

The transmit frame reporting is based on a patch by Stefan Rompf.

Filters can be get and set via a sysfs interface. For example, set the
filter to only send headers (0x7), don't report Tx'd frames (0x10), and
don't report data frames (0x100):

        % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter

All your packets are belong to us:

        % tethereal -n -i rtap0
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      d685b8c2
  15. 20 4月, 2006 1 次提交
    • J
      [PATCH] Revert NET_RADIO Kconfig title change · c1783454
      由 Jean Tourrilhes 提交于 
      	2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I
personally disagree with this change and want it reverted. Patch for
2.6.17-rc1.
	Rationale : WIRELESS_EXT is an invisible option. Therefore,
the only way for a user to enable it is via NET_RADIO. Some users need
to do that for out-of-tree drivers. Therefore it should be mentionned
in the title of the option.
	Rationale2 : the option just below is called "Wireless
Extension API over RtNetlink". Some users may confuse this option for
the main "Wireless Extension" option. Therefore reverting this change
help disambiguate the relation between those two options.
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      c1783454
  17. 01 4月, 2006 1 次提交
  19. 28 3月, 2006 5 次提交
  21. 25 3月, 2006 1 次提交
  23. 23 3月, 2006 1 次提交
    • J
      [PATCH] WE-20 for kernel 2.6.16 · 711e2c33
      由 Jean Tourrilhes 提交于 
      	This is version 20 of the Wireless Extensions. This is the
completion of the RtNetlink work I started early 2004, it enables the
full Wireless Extension API over RtNetlink.

	Few comments on the patch :
	o totally driver transparent, no change in drivers needed.
	o iwevent were already RtNetlink based since they were created
(around 2.5.7). This adds all the regular SET and GET requests over
RtNetlink, using the exact same mechanism and data format as iwevents.
	o This is a Kconfig option, as currently most people have no
need for it. Surprisingly, patch is actually small and well
encapsulated.
	o Tested on SMP, attention as been paid to make it 64 bits clean.
	o Code do probably too many checks and could be further
optimised, but better safe than sorry.
	o RtNetlink based version of the Wireless Tools available on
my web page for people inclined to try out this stuff.

	I would also like to thank Alexey Kuznetsov for his helpful
suggestions to make this patch better.
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      711e2c33
  25. 17 2月, 2006 3 次提交
  27. 11 2月, 2006 1 次提交
  29. 31 1月, 2006 2 次提交
  31. 15 1月, 2006 2 次提交
  33. 13 1月, 2006 1 次提交
  35. 01 12月, 2005 2 次提交
  37. 11 11月, 2005 1 次提交
    • S
      [PATCH] Atmel wireless update · b16a228d
      由 simon@thekelleys.org.uk 提交于 
      * Merge PCMCIA card table with new Brodowski PCMCIA id table.
* Add missing entries to PCMCIA id table.
* Other tweaks to conform with Documentation/driver-changes.txt
  (types, call request_region, etc)
* Fix size of requested IO region.
* Reduce printk verbosity.
* Remove EXPERIMENTAL
* tweak to association code - don't force shared key authentication
  when wep in use.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
      b16a228d
  39. 15 10月, 2005 1 次提交
  41. 06 9月, 2005 3 次提交
  43. 26 8月, 2005 1 次提交
  45. 24 8月, 2005 1 次提交
  47. 28 6月, 2005 1 次提交
  49. 28 5月, 2005 2 次提交