Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 9月, 2006 7 次提交
    • V
      [MLSXFRM]: Auto-labeling of child sockets · 4237c75c
      由 Venkat Yekkirala 提交于 
      This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.

This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4237c75c
    • V
      [MLSXFRM]: Default labeling of socket specific IPSec policies · cb969f07
      由 Venkat Yekkirala 提交于 
      This defaults the label of socket-specific IPSec policies to be the
same as the socket they are set on.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb969f07
    • V
      [MLSXFRM]: Add flow labeling · beb8d13b
      由 Venkat Yekkirala 提交于 
      This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.

The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.

ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      beb8d13b
    • V
      [MLSXFRM]: Flow based matching of xfrm policy and state · e0d1caa7
      由 Venkat Yekkirala 提交于 
      This implements a seemless mechanism for xfrm policy selection and
state matching based on the flow sid. This also includes the necessary
SELinux enforcement pieces.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e0d1caa7
    • V
      [MLSXFRM]: Add security sid to sock · 892c141e
      由 Venkat Yekkirala 提交于 
      This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).

This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      892c141e
    • V
      [MLSXFRM]: Define new SELinux service routine · 08554d6b
      由 Venkat Yekkirala 提交于 
      This defines a routine that combines the Type Enforcement portion of
one sid with the MLS portion from the other sid to arrive at a new
sid. This would be used to define a sid for a security association
that is to be negotiated by IKE as well as for determing the sid for
open requests and connection-oriented child sockets.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      08554d6b
    • V
      [MLSXFRM]: Granular IPSec associations for use in MLS environments · 51bd3986
      由 Venkat Yekkirala 提交于 
      The current approach to labeling Security Associations for SELinux
purposes uses a one-to-one mapping between xfrm policy rules and
security associations.

This doesn't address the needs of real world MLS (Multi-level System,
traditional Bell-LaPadula) environments where a single xfrm policy
rule (pertaining to a range, classified to secret for example) might
need to map to multiple Security Associations (one each for
classified, secret, top secret and all the compartments applicable to
these security levels).

This patch set addresses the above problem by allowing for the mapping
of a single xfrm policy rule to multiple security associations, with
each association used in the security context it is defined for. It
also includes the security context to be used in IKE negotiation in
the acquire messages sent to the IKE daemon so that a unique SA can be
negotiated for each unique security context. A couple of bug fixes are
also included; checks to make sure the SAs used by a packet match
policy (security context-wise) on the inbound and also that the bundle
used for the outbound matches the security context of the flow. This
patch set also makes the use of the SELinux sid in flow cache lookups
seemless by including the sid in the flow key itself. Also, open
requests as well as connection-oriented child sockets are labeled
automatically to be at the same level as the peer to allow for use of
appropriately labeled IPSec associations.

Description of changes:

A "sid" member has been added to the flow cache key resulting in the
sid being available at all needed locations and the flow cache lookups
automatically using the sid. The flow sid is derived from the socket
on the outbound and the SAs (unlabeled where an SA was not used) on
the inbound.

Outbound case:
1. Find policy for the socket.

2. OLD: Find an SA that matches the policy.
 NEW: Find an SA that matches BOTH the policy and the flow/socket.
   This is necessary since not every SA that matches the policy
   can be used for the flow/socket. Consider policy range Secret-TS,
   and SAs each for Secret and TS. We don't want a TS socket to
   use the Secret SA. Hence the additional check for the SA Vs. flow/socket.

3. NEW: When looking thru bundles for a policy, make sure the
        flow/socket can use the bundle. If a bundle is not found,
        create one, calling for IKE if necessary. If using IKE,
        include the security context in the acquire message to the IKE
        daemon.

Inbound case:
1. OLD: Find policy for the socket.
 NEW: Find policy for the incoming packet based on the sid of the
      SA(s) it used or the unlabeled sid if no SAs were
      used. (Consider a case where a socket is "authorized" for two
      policies (unclassified-confidential, secret-top_secret). If the
      packet has come in using a secret SA, we really ought to be
      using the latter policy (secret-top_secret).)

2. OLD: BUG: No check to see if the SAs used by the packet agree with
             the policy sec_ctx-wise.

             (It was indicated in selinux_xfrm_sock_rcv_skb() that
              this was being accomplished by
              (x->id.spi == tmpl->id.spi || !tmpl->id.spi) in xfrm_state_ok,
	      but it turns out tmpl->id.spi
              would normally be zero (unless xfrm policy rules specify one
              at the template level, which they usually don't).
 NEW: The socket is checked for access to the SAs used (based on the
      sid of the SAs) in selinux_xfrm_sock_rcv_skb().

Forward case:
 This would be Step 1 from the Inbound case, followed by Steps 2 and 3
from the Outbound case.

Outstanding items/issues:

- Timewait acknowledgements and such are generated in the
  current/upstream implementation using a NULL socket resulting in the
  any_socket sid (SYSTEM_HIGH) to be used. This problem is not addressed
  by this patch set.

This patch: Add new flask definitions to SELinux

Adds a new avperm "polmatch" to arbitrate flow/state access to a xfrm
policy rule.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      51bd3986
  3. 21 9月, 2006 1 次提交
  5. 03 8月, 2006 1 次提交
    • C
      [AF_UNIX]: Kernel memory leak fix for af_unix datagram getpeersec patch · dc49c1f9
      由 Catherine Zhang 提交于 
      From: Catherine Zhang <cxzhang@watson.ibm.com>

This patch implements a cleaner fix for the memory leak problem of the
original unix datagram getpeersec patch.  Instead of creating a
security context each time a unix datagram is sent, we only create the
security context when the receiver requests it.

This new design requires modification of the current
unix_getsecpeer_dgram LSM hook and addition of two new hooks, namely,
secid_to_secctx and release_secctx.  The former retrieves the security
context and the latter releases it.  A hook is required for releasing
the security context because it is up to the security module to decide
how that's done.  In the case of Selinux, it's a simple kfree
operation.
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dc49c1f9
  7. 01 8月, 2006 2 次提交
  9. 15 7月, 2006 1 次提交
  11. 11 7月, 2006 2 次提交
  13. 01 7月, 2006 5 次提交
  15. 30 6月, 2006 3 次提交
    • C
      [AF_UNIX]: Datagram getpeersec · 877ce7c1
      由 Catherine Zhang 提交于 
      This patch implements an API whereby an application can determine the
label of its peer's Unix datagram sockets via the auxiliary data mechanism of
recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of the peer of a Unix datagram socket.  The application
can then use this security context to determine the security context for
processing on behalf of the peer who sent the packet.

Patch design and implementation:

The design and implementation is very similar to the UDP case for INET
sockets.  Basically we build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).  To retrieve the security
context, the application first indicates to the kernel such desire by
setting the SO_PASSSEC option via getsockopt.  Then the application
retrieves the security context using the auxiliary data mechanism.

An example server application for Unix datagram socket should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_SOCKET, SO_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_SOCKET &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

sock_setsockopt is enhanced with a new socket option SOCK_PASSSEC to allow
a server socket to receive security context of the peer.

Testing:

We have tested the patch by setting up Unix datagram client and server
applications.  We verified that the server can retrieve the security context
using the auxiliary data mechanism of recvmsg.
Signed-off-by: NCatherine Zhang <cxzhang@watson.ibm.com>
Acked-by: NAcked-by: James Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      877ce7c1
    • D
      [NETLINK]: Encapsulate eff_cap usage within security framework. · c7bdb545
      由 Darrel Goeddel 提交于 
      This patch encapsulates the usage of eff_cap (in netlink_skb_params) within
the security framework by extending security_netlink_recv to include a required
capability parameter and converting all direct usage of eff_caps outside
of the lsm modules to use the interface.  It also updates the SELinux
implementation of the security_netlink_send and security_netlink_recv
hooks to take advantage of the sid in the netlink_skb_params struct.
This also enables SELinux to perform auditing of netlink capability checks.
Please apply, for 2.6.18 if possible.
Signed-off-by: NDarrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c7bdb545
    • D
      [PATCH] Keys: Allow in-kernel key requestor to pass auxiliary data to upcaller · 4e54f085
      由 David Howells 提交于 
      The proposed NFS key type uses its own method of passing key requests to
userspace (upcalling) rather than invoking /sbin/request-key.  This is
because the responsible userspace daemon should already be running and will
be contacted through rpc_pipefs.

This patch permits the NFS filesystem to pass auxiliary data to the upcall
operation (struct key_type::request_key) so that the upcaller can use a
pre-existing communications channel more easily.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-By: NKevin Coffman <kwc@citi.umich.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      4e54f085
  17. 28 6月, 2006 2 次提交
  19. 27 6月, 2006 7 次提交
  21. 23 6月, 2006 6 次提交
    • D
      [PATCH] SELinux: add task_movememory hook · 35601547
      由 David Quigley 提交于 
      This patch adds new security hook, task_movememory, to be called when memory
owened by a task is to be moved (e.g.  when migrating pages to a this hook is
identical to the setscheduler implementation, but a separate hook introduced
to allow this check to be specialized in the future if necessary.

Since the last posting, the hook has been renamed following feedback from
Christoph Lameter.
Signed-off-by: NDavid Quigley <dpquigl@tycho.nsa.gov>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      35601547
    • J
      [PATCH] lsm: add task_setioprio hook · 03e68060
      由 James Morris 提交于 
      Implement an LSM hook for setting a task's IO priority, similar to the hook
for setting a tasks's nice value.

A previous version of this LSM hook was included in an older version of
multiadm by Jan Engelhardt, although I don't recall it being submitted
upstream.

Also included is the corresponding SELinux hook, which re-uses the setsched
permission in the proccess class.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      03e68060
    • D
      [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry · 726c3342
      由 David Howells 提交于 
      Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      726c3342
    • D
      [PATCH] VFS: Permit filesystem to override root dentry on mount · 454e2398
      由 David Howells 提交于 
      Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      454e2398
    • D
      [PATCH] Keys: Fix race between two instantiators of a key · 04c567d9
      由 David Howells 提交于 
      Add a revocation notification method to the key type and calls it whilst
the key's semaphore is still write-locked after setting the revocation
flag.

The patch then uses this to maintain a reference on the task_struct of the
process that calls request_key() for as long as the authorisation key
remains unrevoked.

This fixes a potential race between two processes both of which have
assumed the authority to instantiate a key (one may have forked the other
for example).  The problem is that there's no locking around the check for
revocation of the auth key and the use of the task_struct it points to, nor
does the auth key keep a reference on the task_struct.

Access to the "context" pointer in the auth key must thenceforth be done
with the auth key semaphore held.  The revocation method is called with the
target key semaphore held write-locked and the search of the context
process's keyrings is done with the auth key semaphore read-locked.

The check for the revocation state of the auth key just prior to searching
it is done after the auth key is read-locked for the search.  This ensures
that the auth key can't be revoked between the check and the search.

The revocation notification method is added so that the context task_struct
can be released as soon as instantiation happens rather than waiting for
the auth key to be destroyed, thus avoiding the unnecessary pinning of the
requesting process.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      04c567d9
    • M
      [PATCH] selinux: add hooks for key subsystem · d720024e
      由 Michael LeMay 提交于 
      Introduce SELinux hooks to support the access key retention subsystem
within the kernel.  Incorporate new flask headers from a modified version
of the SELinux reference policy, with support for the new security class
representing retained keys.  Extend the "key_alloc" security hook with a
task parameter representing the intended ownership context for the key
being allocated.  Attach security information to root's default keyrings
within the SELinux initialization routine.

Has passed David's testsuite.
Signed-off-by: NMichael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      d720024e
  23. 20 6月, 2006 1 次提交
  25. 18 6月, 2006 2 次提交
    • J
      [SECMARK]: Add new packet controls to SELinux · 4e5ab4cb
      由 James Morris 提交于 
      Add new per-packet access controls to SELinux, replacing the old
packet controls.

Packets are labeled with the iptables SECMARK and CONNSECMARK targets,
then security policy for the packets is enforced with these controls.

To allow for a smooth transition to the new controls, the old code is
still present, but not active by default.  To restore previous
behavior, the old controls may be activated at runtime by writing a
'1' to /selinux/compat_net, and also via the kernel boot parameter
selinux_compat_net.  Switching between the network control models
requires the security load_policy permission.  The old controls will
probably eventually be removed and any continued use is discouraged.

With this patch, the new secmark controls for SElinux are disabled by
default, so existing behavior is entirely preserved, and the user is
not affected at all.

It also provides a config option to enable the secmark controls by
default (which can always be overridden at boot and runtime).  It is
also noted in the kconfig help that the user will need updated
userspace if enabling secmark controls for SELinux and that they'll
probably need the SECMARK and CONNMARK targets, and conntrack protocol
helpers, although such decisions are beyond the scope of kernel
configuration.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4e5ab4cb
    • J
      [SECMARK]: Add SELinux exports · c749b29f
      由 James Morris 提交于 
      Add and export new functions to the in-kernel SELinux API in support of the
new secmark-based packet controls.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c749b29f