For better code reuse use the newly added page iterator to iterate
through the pages.  The offset, length within the page is still
calculated by the mapping iterator as well as the actual mapping.  Idea
from Tejun Heo.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an iterator to walk through a scatter list a page at a time starting
at a specific page offset.  As opposed to the mapping iterator this is
meant to be small, performing well even in simple loops like collecting
all pages on the scatterlist into an array or setting up an iommu table
based on the pages' DMA address.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The intent is to ensure that all Tegra-related patches are sent to the
linux-tegra@ mailing list, so people can keep up-to-date on all misc
driver changes.

Doing this with a keyword is far simpler and more compact than listing
all Tegra-related drivers, even if wildcards were used.

Words such as integrate or integrator are common.  Ensure the character
right before "tegra" isn't a-z (case-insensitive), to make sure the
keyword doesn't match those.

The only files that the keyword doesn't match are the NVEC driver.  Add
the linux-tegra mailing list to the NVEC entry to solve this.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Cc: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow K: entries in MAINTAINERS to match directly against filenames;
either those extracted from patch +++ or --- lines, or those specified
on the command-line using the -f option.

This potentially allows fewer lines in a MAINTAINERS entry, if all the
relevant files are scattered throughout the whole kernel tree, yet
contain some common keyword.  An example would be using an ARM SoC name
as the keyword to catch all related drivers.

I don't think setting exact_pattern_match_hash would be appropriate
here; at least for intended Tegra use case, this feature is to ensure
that all Tegra-related driver changes get Cc'd to the Tegra mailing
list.  Setting exact_pattern_match_hash would prevent git history
parsing for e.g.  S-o-b tags, which still seems like it would be useful.
Hence, this flag isn't set.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__orderly_poweroff() does argv_free() if call_usermodehelper_fns()
returns -ENOMEM.  As Lucas pointed out, this can be wrong if -ENOMEM was
not triggered by the failing call_usermodehelper_setup(), in this case
both __orderly_poweroff() and argv_cleanup() can do kfree().

Kill argv_cleanup() and change __orderly_poweroff() to call argv_free()
unconditionally like do_coredump() does.  This info->cleanup() is not
needed (and wrong) since 6c0c0d4d "fix bug in orderly_poweroff() which
did the UMH_NO_WAIT => UMH_WAIT_EXEC change, we can rely on the fact
that CLONE_VFORK can't return until do_execve() succeeds/fails.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: hongfeng <hongfeng@marvell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the frv arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2_block_group_alloc_discontig() disables chain relink by setting
ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple
cluster groups.

It doesn't keep the credits for all chain relink,but
ocfs2_claim_suballoc_bits overrides this in this call trace:
ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()->
__ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits()
ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call
ocfs2_search_chain() one time and disable it again, and then we run out
of credits.

Fix is to allow relink by default and disable it in
ocfs2_block_group_alloc_discontig.

Without this patch, End-users will run into a crash due to run out of
credits, backtrace like this:

  RIP: 0010:[<ffffffffa0808b14>]  [<ffffffffa0808b14>]
  jbd2_journal_dirty_metadata+0x164/0x170 [jbd2]
  RSP: 0018:ffff8801b919b5b8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0
  RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8
  RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0
  R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800
  FS:  00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0)
  Call Trace:
    ocfs2_journal_dirty+0x2f/0x70 [ocfs2]
    ocfs2_relink_block_group+0x111/0x480 [ocfs2]
    ocfs2_search_chain+0x455/0x9a0 [ocfs2]
    ...
Signed-off-by: NXiaowei.Hu <xiaowei.hu@oracle.com>
Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed.  As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.

Note this was introduced by 9d8f13ba ("security: new
security_inode_init_security API adds function callback")

To reproduce:

    set default ACL for the parent dir(ocfs2 in this case):
    $ setfacl -m default:user:jeff:rwx ../ocfs2/
    $ getfacl ../ocfs2/
    # file: ../ocfs2/
    # owner: jeff
    # group: jeff
    user::rwx
    group::r-x
    other::r-x
    default:user::rwx
    default:user:jeff:rwx
    default:group::r-x
    default:mask::rwx
    default:other::r-x

    $ touch a
    $ getfacl a
    # file: a
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:

    $ ./ocfs2_reflink a b
    $ getfacl b
    # file: b
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

In this case, the end user can also observed an error message at syslog:

  (ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0

After applying this patch, create reflink file c from a:

    $ ./ocfs2_reflink a c
    $ getfacl c
    # file: c
    # owner: jeff
    # group: jeff
    user::rw-
    user:jeff:rwx			#effective:rw-
    group::r-x			#effective:r--
    mask::rw-
    other::r--

Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>

static int
reflink_file(char const *src_name, char const *dst_name,
	     bool preserve_attrs)
{
	int fd;

#ifndef REFLINK_ATTR_NONE
#  define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
#  define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
	struct reflink_arguments {
		uint64_t old_path;
		uint64_t new_path;
		uint64_t preserve;
	};

#  define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
	struct reflink_arguments args = {
		.old_path = (unsigned long) src_name,
		.new_path = (unsigned long) dst_name,
		.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
					     REFLINK_ATTR_NONE,
	};

	fd = open(src_name, O_RDONLY);
	if (fd < 0) {
		fprintf(stderr, "Failed to open %s: %s\n",
			src_name, strerror(errno));
		return -1;
	}

	if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
		fprintf(stderr, "Failed to reflink %s to %s: %s\n",
			src_name, dst_name, strerror(errno));
		return -1;
	}
}

int
main(int argc, char *argv[])
{
	if (argc != 3) {
		fprintf(stdout, "Usage: %s source dest\n", argv[0]);
		return 1;
	}

	return reflink_file(argv[1], argv[2], 0);
}
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Reviewed-by: NTao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ef5da59f ("scripts/kernel-doc: handle struct member
__aligned") permits "char something [123] __aligned(8);".

However, by using \d we constraint ourselves with integers.  This is not
always the case.  In fact, it might be better to do char something[123]
__aligned(sizeof(u16));

For example, With wireless_dev defining:

    u8 address[ETH_ALEN] __aligned(sizeof(u16));

With \d, scripts/kernel-doc erroneously says:

    Warning(include/net/cfg80211.h:2618): Excess struct/union/enum/typedef member 'address' description in 'wireless_dev'

This is because the regex __aligned\s*\(\d+\) fails match at \d as
sizeof is used.

So replace \d with .  to indicate "something" in kernel-doc to ignore
__aligned(SOMETHING) in structs.  With this change, we can use integers
OR sizeof() or macros as we please.
Signed-off-by: NNishanth Menon <nm@ti.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

munlock_vma_pages_range() was always incrementing addresses by PAGE_SIZE
at a time.  When munlocking THP pages (or the huge zero page), this
resulted in taking the mm->page_table_lock 512 times in a row.

We can do better by making use of the page_mask returned by
follow_page_mask (for the huge zero page case), or the size of the page
munlock_vma_page() operated on (for the true THP page case).
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight
dri= ver and current sinks.  This patch enables LP8788 backlight module.

(Brightness mode)
The brightness is controlled by PWM input or I2C register.
All modes are supported in the driver.

(Platform data)
Configurable data can be defined in the platform side.
 name                  : backlight driver name. (default: "lcd-backlight")
 initial_brightness    : initial value of backlight brightness
 bl_mode               : brightness control by PWM or lp8788 register
 dim_mode              : dimming mode selection
 full_scale            : full scale current setting
 rise_time             : brightness ramp up step time
 fall_time             : brightness ramp down step time
 pwm_pol               : PWM polarity setting when bl_mode is PWM based
 period_ns             : platform specific PWM period value. unit is nano.

The default values are set in case no platform data is defined.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: "devendra.aaru" <devendra.aaru@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A misplaced #endif causes link errors related to pcim_*() functions.

This is because pcim_*() functions are related to CONFIG_PCI option,
however these are not related to CONFIG_HAS_IOPORT option.  Therefore,
when CONFIG_PCI is enabled and CONFIG_HAS_IOPORT is not enabled, it makes
link errors related to pcim_*() functions as below:

drivers/ata/libata-sff.c:3233: undefined reference to `pcim_iomap_regions'
drivers/ata/libata-sff.c:3238: undefined reference to `pcim_iomap_table'
drivers/built-in.o: In function `ata_pci_sff_init_host':
drivers/ata/libata-sff.c:2318: undefined reference to `pcim_iomap_regions'
drivers/ata/libata-sff.c:2329: undefined reference to `pcim_iomap_table
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Greg KH <greg@kroah.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the parisc arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

[akpm@linux-foundation.org: remove now-unused DCACHE_ALIGN(), per James]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Acked-by: NHelge Deller <deller@gmx.de>
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes power_on() call optional.  The voltage source can be
provided to some boards using ams369fg06 panel, thus in this case, power
on/off sequence is not necessary.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the ClearPage/SetPage/TestClearPage/TestSetPage variants to the not
reported Page CamelCase variables.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When taking an address of an extern array, gcc quite naturally should be
able to say "an address of an object can never be NULL" and just
optimize away the test entirely.

However, the new alternate sysrq reset code (commit 154b7a48:
"Input: sysrq - allow specifying alternate reset sequence") did exactly
that, and declared platform_sysrq_reset_seq[] as a weak array, and
expecting that testing the address of the array would show whether it
actually got linked against something or not.

And that doesn't work with all gcc versions.  Clearly it works with
*some* versions of gcc, and maybe it's even supposed to work, but it
really is a very fragile concept.

So instead of testing the address of the weak variable, just create a
weak instance of that array that is empty.  If some platform then has a
real platform_sysrq_reset_seq[] that overrides our weak one, the linker
will switch to that one, and it all works without any run-time
conditionals at all.
Reported-by: NDave Airlie <airlied@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary.  However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.

And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment.  So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!

So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.
Reported-and-tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

Pull xtensa update from Chris Zankel:
 "Added features:
   - add support for thread local storage (TLS)

   - add accept4 and finit_module syscalls

   - support medium-priority interrupts

   - add support for dc232c processor variant

   - support file-base simulated disk for ISS simulator

  Bug fixes:

   - fix return values returned by the str[n]cmp functions

   - avoid mmap cache aliasing

   - fix handling of 'windowed registers' in ptrace"

* tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux:
  xtensa: add accept4 syscall
  xtensa: add support for TLS
  xtensa: add missing include asm/uaccess.h to checksum.h
  xtensa: do not enable GENERIC_GPIO by default
  xtensa: complete ptrace handling of register windows
  xtensa: add support for oprofile
  xtensa: move spill_registers to traps.h
  xtensa: ISS: add host file-based simulated disk
  xtensa: fix str[n]cmp return value
  xtensa: avoid mmap cache aliasing
  xtensa: add finit_module syscall
  xtensa: pull signal definitions from signal-defs.h
  xtensa: fix ipc_parse_version selection
  xtensa: dispatch medium-priority interrupts
  xtensa: Add config files for Diamond 233L - Rev C processor variant
  xtensa: use new common dtc rule
  xtensa: rename prom_update_property to of_update_property

Pull microblaze update from Michal Simek:
 "Microblaze changes.

  After my discussion with Arnd I have also added there asm-generic io
  patch which is Acked by him and Geert."

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  asm-generic: io: Fix ioread16/32be and iowrite16/32be
  microblaze: Do not use module.h in files which are not modules
  microblaze: Fix coding style issues
  microblaze: Add missing return from debugfs_tlb
  microblaze: Makefile clean
  microblaze: Add .gitignore entries for auto-generated files
  microblaze: Fix strncpy_from_user macro

Pull OpenRISC updates from Jonas Bonn:
 "An equal number of bug fixes and trivial cleanups; no new features.

   - Two patches to fix errors thrown by the updated toolchain.

   - Three other bug fixes.

   - Four trivial cleanups."

* 'for-upstream' of git://openrisc.net/jonas/linux:
  openrisc: add missing header inclusion
  openrisc: really pass correct arg to schedule_tail
  Add bitops include needed for ext2 filesystem
  openrisc: update DTLB-miss handler last
  openrisc: fix up vmalloc page table loading
  openrisc idle: delete pm_idle
  openrisc: remove CONFIG_SYMBOL_PREFIX
  openrisc: avoid using function parameter regs in reset vector
  openrisc: remove unused current_regs

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge
  Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit"
  x86/mm/numa: Don't check if node is NUMA_NO_NODE
  x86, efi: Make "noefi" really disable EFI runtime serivces
  x86/apic: Fix parsing of the 'lapic' cmdline option

Pull timer fixes from Ingo Molnar.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource : Nomadik-mtu : fix missing irq initialization
  posix-timer: Don't call idr_find() with out-of-range ID

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cputime: Use local_clock() for full dynticks cputime accounting
  cputime: Constify timeval_to_cputime(timeval) argument
  sched: Move RR_TIMESLICE from sysctl.h to rt.h
  sched: Fix /proc/sched_debug failure on very very large systems
  sched: Fix /proc/sched_stat failure on very very large systems
  sched/core: Remove the obsolete and unused nr_uninterruptible() function

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Add Intel IvyBridge event scheduling constraints
  ftrace: Call ftrace cleanup module notifier after all other notifiers
  tracing/syscalls: Allow archs to ignore tracing compat syscalls

Pull ext4 updates from Theodore Ts'o:
 "The one new feature added in this patch series is the ability to use
  the "punch hole" functionality for inodes that are not using extent
  maps.

  In the bug fix category, we fixed some races in the AIO and fstrim
  code, and some potential NULL pointer dereferences and memory leaks in
  error handling code paths.

  In the optimization category, we fixed a performance regression in the
  jbd2 layer introduced by commit d9b01934 ("jbd: fix fsync() tid
  wraparound bug", introduced in v3.0) which shows up in the AIM7
  benchmark.  We also further optimized jbd2 by minimize the amount of
  time that transaction handles are held active.

  This patch series also features some additional enhancement of the
  extent status tree, which is now used to cache extent information in a
  more efficient/compact form than what we use on-disk."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (65 commits)
  ext4: fix free clusters calculation in bigalloc filesystem
  ext4: no need to remove extent if len is 0 in ext4_es_remove_extent()
  ext4: fix xattr block allocation/release with bigalloc
  ext4: reclaim extents from extent status tree
  ext4: adjust some functions for reclaiming extents from extent status tree
  ext4: remove single extent cache
  ext4: lookup block mapping in extent status tree
  ext4: track all extent status in extent status tree
  ext4: let ext4_ext_map_blocks return EXT4_MAP_UNWRITTEN flag
  ext4: rename and improbe ext4_es_find_extent()
  ext4: add physical block and status member into extent status tree
  ext4: refine extent status tree
  ext4: use ERR_PTR() abstraction for ext4_append()
  ext4: refactor code to read directory blocks into ext4_read_dirblock()
  ext4: add debugging context for warning in ext4_da_update_reserve_space()
  ext4: use KERN_WARNING for warning messages
  jbd2: use module parameters instead of debugfs for jbd_debug
  ext4: use module parameters instead of debugfs for mballoc_debug
  ext4: start handle at the last possible moment when creating inodes
  ext4: fix the number of credits needed for acl ops with inline data
  ...

Pull ext2, ext3, udf updates from Jan Kara:
 "Several UDF fixes, a support for UDF extent cache, and couple of ext2
  and ext3 cleanups and minor fixes"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  Ext2: remove the static function release_blocks to optimize the kernel
  Ext2: mark inode dirty after the function dquot_free_block_nodirty is called
  Ext2: remove the overhead check about sb in the function ext2_new_blocks
  udf: Remove unused s_extLength from udf_bitmap
  udf: Make s_block_bitmap standard array
  udf: Fix bitmap overflow on large filesystems with small block size
  udf: add extent cache support in case of file reading
  udf: Write LVID to disk after opening / closing
  Ext3: return ENOMEM rather than EIO if sb_getblk fails
  Ext2: return ENOMEM rather than EIO if sb_getblk fails
  Ext3: use unlikely to improve the efficiency of the kernel
  Ext2: use unlikely to improve the efficiency of the kernel
  Ext3: add necessary check in case IO error happens
  Ext2: free memory allocated and forget buffer head when io error happens
  ext3: Fix memory leak when quota options are specified multiple times
  ext3, ext4, ocfs2: remove unused macro NAMEI_RA_INDEX

Pull ubifs updates from Artem Bityutskiy:
 "It's been quite silent and we have only a couple of bug-fixes for the
  orphans handling code plus one cosmetic change."

* tag 'upstream-3.9-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: fix double free of ubifs_orphan objects
  UBIFS: fix use of freed ubifs_orphan objects
  UBIFS: rename random32() to prandom_u32()

Pull f2fs update from Jaegeuk Kim:
 "[Major bug fixes]
   o Store device file information correctly
   o Fix -EIO handling with respect to power-off-recovery
   o Allocate blocks with global locks
   o Fix wrong calculation of the SSR cost

  [Cleanups]
   o Get rid of fake on-stack dentries

  [Enhancement]
   o Support (un)freeze_fs
   o Enhance the f2fs_gc flow
   o Support 32-bit binary execution on 64-bit kernel"

* tag 'f2fs-for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: avoid build warning
  f2fs: add compat_ioctl to provide backward compatability
  f2fs: fix calculation of max. gc cost in the SSR case
  f2fs: clarify and enhance the f2fs_gc flow
  f2fs: optimize the return condition for has_not_enough_free_secs
  f2fs: make an accessor to get sections for particular block type
  f2fs: mark gc_thread as NULL when thread creation is failed
  f2fs: name gc task as per the block device
  f2fs: remove unnecessary gc option check and balance_fs
  f2fs: remove repeated F2FS_SET_SB_DIRT call
  f2fs: when check superblock failed, try to check another superblock
  f2fs: use F2FS_BLKSIZE to judge bloksize and page_cache_size
  f2fs: add device name in debugfs
  f2fs: stop repeated checking if cp is needed
  f2fs: avoid balanc_fs during evict_inode
  f2fs: remove the use of page_cache_release
  f2fs: fix typo mistake for data_version description
  f2fs: reorganize code for ra_node_page
  f2fs: avoid redundant call to has_not_enough_free_secs in f2fs_gc
  f2fs: add un/freeze_fs into super_operations
  ...

Pull virtio updates from Rusty Russell:
 "All trivial, thanks to the stuff which didn't quite make it time"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Initialize guest_connected=true for rproc_serial
  virtio: use module_virtio_driver.
  virtio: Add module driver macro for virtio drivers.
  virtio_console: Use virtio device index to generate port name
  virtio: make pci_device_id const
  virtio: make config_ops const
  virtio-mmio: fix wrong comment about register offset
  virtio_console: Let unconnected rproc device receive data.

Pull VFIO updates from Alex Williamson:
 - Fixes PCIe v1 extended capability support

 - Cleans up read/write access functions

 - Fix Removal test to properly wait until devices are unused

 - Enable pcieport driver usage for non-accessible devices w/in groups

 - Extensions for PCI VGA support

* tag 'vfio-v3.9-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: remove depends on CONFIG_EXPERIMENTAL
  vfio-pci: Add support for VGA region access
  vfio-pci: Manage user power state transitions
  vfio: whitelist pcieport
  vfio: Protect vfio_dev_present against device_del
  vfio-pci: Cleanup BAR access
  vfio-pci: Cleanup read/write functions
  vfio-pci: Enable PCIe extended capabilities on v1

Pull networking fixes from David Miller:

 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li
    Wei.

 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet.

 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from
    Alexander Duyck.

 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix
    from Eric Dumazet.

 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the
    amount of TCP option space was not taken into account properly in
    this code path.  Fix from yuchung Cheng.

 6) MLX4 driver allocates device queues with the wrong size, from Kleber
    Sacilotto.

 7) sock_diag can access past the end of the sock_diag_handlers[] array,
    from Mathias Krause.

 8) vlan_set_encap_proto() makes incorrect assumptions about where
    skb->data points, rework the logic so that it works regardless of
    where skb->data happens to be.  From Jesse Gross.

 9) Fix gianfar build failure with NET_POLL enabled, from Paul
    Gortmaker.

10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from
   Pravin B Shelar.

11) bgmac driver does:

        int i;

        for (i = 0; ...; ...) {
                ...
                for (i = 0; ...; ...) {

    effectively corrupting the outer loop index, use a seperate
    variable for the inner loops.  From Rafał Miłecki.

12) Fix suspend bugs in smsc95xx driver, from Ming Lei.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND
  usbnet: smsc95xx: fix broken runtime suspend
  usbnet: smsc95xx: fix suspend failure
  bgmac: fix indexing of 2nd level loops
  b43: Fix lockdep splat on module unload
  Revert "ip_gre: propogate target device GSO capability to the tunnel device"
  IP_GRE: Fix GRE_CSUM case.
  VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.
  IP_GRE: Fix IP-Identification.
  net/pasemi: Fix missing coding style
  vmxnet3: fix ethtool ring buffer size setting
  vmxnet3: make local function static
  bnx2x: remove dead code and make local funcs static
  gianfar: fix compile fail for NET_POLL=y due to struct packing
  vlan: adjust vlan_set_encap_proto() for its callers
  sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg
  sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
  vxlan: remove depends on CONFIG_EXPERIMENTAL
  mlx4_en: fix allocation of CPU affinity reverse-map
  mlx4_en: fix allocation of device tx_cq
  ...

Pull scsi target updates from Nicholas Bellinger:
 "The highlights in this series include:

   - Improve sg_table lookup scalability in RAMDISK_MCP (martin)

   - Add device attribute to expose config name for INQUIRY model (tregaron)

   - Convert tcm_vhost to use lock-less list for cmd completion (asias)

   - Add tcm_vhost support for multiple target's per endpoint (asias)

   - Add tcm_vhost support for multiple queues per vhost (asias)

   - Add missing mapped_lun bounds checking during make_mappedlun setup
     in generic fabric configfs code (jan engelhardt + nab)

   - Enforce individual iscsi-target network portal export once per
     TargetName endpoint (grover + nab)

   - Add WRITE_SAME w/ UNMAP=0 emulation to FILEIO backend (nab)

  Things have been mostly quiet this round, with majority of the work
  being done on the iser-target WIP driver + associated iscsi-target
  refactoring patches currently in flight for v3.10 code.

  At this point there is one patch series left outstanding from Asias to
  add support for UNMAP + WRITE_SAME w/ UNMAP=1 to FILEIO awaiting
  feedback from hch & Co, that will likely be included in a post
  v3.9-rc1 PULL request if there are no objections.

  Also, there is a regression bug recently reported off-list that seems
  to be effecting v3.5 and v3.6 kernels with MSFT iSCSI initiators that
  is still being tracked down.  No word if this effects >= v3.7 just
  yet, but if so there will likely another PULL request coming your
  way.."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors
  target/file: Add WRITE_SAME w/ UNMAP=0 emulation support
  iscsi-target: Enforce individual network portal export once per TargetName
  iscsi-target: Refactor iscsit_get_np sockaddr matching into iscsit_check_np_match
  target: Add missing mapped_lun bounds checking during make_mappedlun setup
  target: Fix lookup of dynamic NodeACLs during cached demo-mode operation
  target: Fix parameter list length checking in MODE SELECT
  target: Fix error checking for UNMAP commands
  target: Fix sense data for out-of-bounds IO operations
  target_core_rd: break out unterminated loop during copy
  tcm_vhost: Multi-queue support
  tcm_vhost: Multi-target support
  target: Add device attribute to expose config_item_name for INQUIRY model
  target: don't truncate the fail intr address
  target: don't always say "ipv6" as address type
  target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
  iscsi-target: make some temporary buffers larger
  tcm_vhost: Optimize gup in vhost_scsi_map_to_sgl
  tcm_vhost: Use iov_num_pages to calculate sgl_count
  tcm_vhost: Introduce iov_num_pages
  ...

Pull infiniband update from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.9:

   - SRP error handling fixes from Bart Van Assche

   - Implementation of memory windows for mlx4 from Shani Michaeli

   - Lots of cxgb4 HW driver fixes from Vipul Pandya

   - Make iSER work for virtual functions, other fixes from Or Gerlitz

   - Fix for bug in qib HW driver from Mike Marciniszyn

   - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman

   - Various cleanups and warning fixes from Julia Lawall, Paul Bolle,
     Wei Yongjun"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits)
  IB/mlx4: Advertise MW support
  IB/mlx4: Support memory window binding
  mlx4: Implement memory windows allocation and deallocation
  mlx4_core: Enable memory windows in {INIT, QUERY}_HCA
  mlx4_core: Disable memory windows for virtual functions
  IPoIB: Free ipoib neigh on path record failure so path rec queries are retried
  IB/srp: Fail I/O requests if the transport is offline
  IB/srp: Avoid endless SCSI error handling loop
  IB/srp: Avoid sending a task management function needlessly
  IB/srp: Track connection state properly
  IB/mlx4: Remove redundant NULL check before kfree
  IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable
  IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool
  IB/iser: Enable iser when FMRs are not supported
  IB/iser: Avoid error prints on EAGAIN registration failures
  IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML
  IB/uverbs: Implement memory windows support in uverbs
  IB/core: Add "type 2" memory windows support
  mlx4_core: Propagate MR deregistration failures to caller
  mlx4_core: Rename MPT-related functions to have mpt_ prefix
  ...

Pull IOMMU Updates from Joerg Roedel:
 "Besides some fixes and cleanups in the code there are three more
  important changes to point out this time:

	* New IOMMU driver for the ARM SHMOBILE platform
	* An IOMMU-API extension for non-paging IOMMUs (required for
	  upcoming PAMU driver)
	* Rework of the way the Tegra IOMMU driver accesses its
	  registetrs - register windows are easier to extend now.

  There are also a few changes to non-iommu code, but that is acked by
  the respective maintainers."

* tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits)
  iommu/tegra: assume CONFIG_OF in SMMU driver
  iommu/tegra: assume CONFIG_OF in gart driver
  iommu/amd: Remove redundant NULL check before dma_ops_domain_free().
  iommu/amd: Initialize device table after dma_ops
  iommu/vt-d: Zero out allocated memory in dmar_enable_qi
  iommu/tegra: smmu: Fix incorrect mask for regbase
  iommu/exynos: Make exynos_sysmmu_disable static
  ARM: mach-shmobile: r8a7740: Add IPMMU device
  ARM: mach-shmobile: sh73a0: Add IPMMU device
  ARM: mach-shmobile: sh7372: Add IPMMU device
  iommu/shmobile: Add iommu driver for Renesas IPMMU modules
  iommu: Add DOMAIN_ATTR_WINDOWS domain attribute
  iommu: Add domain window handling functions
  iommu: Implement DOMAIN_ATTR_PAGING attribute
  iommu: Check for valid pgsize_bitmap in iommu_map/unmap
  iommu: Make sure DOMAIN_ATTR_MAX is really the maximum
  iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA
  iommu/tegra: smmu: Use helper function to check for valid register offset
  iommu/tegra: smmu: Support variable MMIO ranges/blocks
  iommu/tegra: Add missing spinlock initialization
  ...

Pull DMA-mapping updates from Marek Szyprowski:
 "This time all patches are related only to ARM DMA-mapping subsystem.
  The main extension provided by this pull request is highmem support.
  Besides that it contains a bunch of small bugfixes and cleanups."

* 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation
  ARM: dma-mapping: Add maximum alignment order for dma iommu buffers
  ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices
  ARM: dma-mapping: add support for CMA regions placed in highmem zone
  arm: dma mapping: export arm iommu functions
  ARM: dma-mapping: Add arm_iommu_detach_device()
  ARM: dma-mapping: Add macro to_dma_iommu_mapping()
  ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()
  ARM: iommu: Include linux/kref.h in asm/dma-iommu.h

Pull i2c updates from Wolfram Sang:
 "Highlights:

   - new drivers for Intel ismt & Broadcom bcm2835
   - a number of drivers got support for more variants and mostly got
     cleaned up on the way (sis630, i801, at91, tegra, designware)
   - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure
   - removed the i2c_smbus_process_call from the core since there are no
     users
   - mxs can now switch between PIO and DMA depending on the message
     size and the bus speed can now be arbitrary

  In addition, there is the usual bunch of fixes, cleanups, devm_*
  conversions, etc"

Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits)
  i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls
  i2c: pxa: remove incorrect __exit annotations
  i2c: ocores: Fix pointer to integer cast warning
  i2c: tegra: remove warning dump if timeout happen in transfer
  i2c: fix i2c-ismt.c printk format warning
  i2c: i801: Add Device IDs for Intel Wellsburg PCH
  i2c: add bcm2835 driver
  i2c: ismt: Add Seth and Myself as maintainers
  i2c: sis630: checkpatch cleanup
  i2c: sis630: display unsigned hex
  i2c: sis630: use hex to constants for SMBus commands
  i2c: sis630: fix behavior after collision
  i2c: sis630: clear sticky bits
  i2c: sis630: Add SIS964 support
  i2c: isch: Add module parameter for backbone clock rate if divider is unset
  i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  i2c: sh_mobile: don't send a stop condition by default inside transfers
  i2c: sh_mobile: eliminate an open-coded "goto" loop
  i2c: sh_mobile: fix timeout error handling
  ...

Pull GPIO changes from Grant Likely:
 "This branch contains the usual set of individual driver improvements
  and bug fixes, as well as updates to the core code.  The more notable
  changes include:

   - Internally add new API for referencing GPIOs by gpio_desc instead
     of number.  Eventually this will become a public API

   - ACPI GPIO binding support"

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
  arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
  gpio: em: Use irq_domain_add_simple() to fix runtime error
  gpio: using common order: let 'static const' instead of 'const static'
  gpio/vt8500: memory cleanup missing
  gpiolib: Fix locking on gpio debugfs files
  gpiolib: let gpio_chip reference its descriptors
  gpiolib: use descriptors internally
  gpiolib: use gpio_chips list in gpiochip_find_base
  gpiolib: use gpio_chips list in sysfs ops
  gpiolib: use gpio_chips list in gpiochip_find
  gpiolib: use gpio_chips list in gpiolib_sysfs_init
  gpiolib: link all gpio_chips using a list
  gpio/langwell: cleanup driver
  gpio/langwell: Add Cloverview ids to pci device table
  gpio/lynxpoint: add chipset gpio driver.
  gpiolib: add missing braces in gpio_direction_show
  gpiolib-acpi: Fix error checks in interrupt requesting
  gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
  gpiolib: remove gpiochip_reserve()
  arm: pxa: tosa: do not use gpiochip_reserve()
  ...

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...