Refactor the GT power management interface to work through the GT now
that it is under the control of gt/

Based on a patch by Chris Wilson.
Signed-off-by: NAndi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905111403.10071-1-andi.shyti@intel.com

Our fence management is lazy, very lazy. If the user marks an object as
untiled, we do not immediately flush the fence but merely mark it as
dirty. On the next use we have to remember to check and remove the fence,
by which time we hope it is idle and we do not have to wait.

v2: Throw away the old fence on the next ggtt_pin.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468
Fixes: 1f7fd484 ("drm/i915: Replace i915_vma_put_fence()")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823153944.20630-1-chris@chris-wilson.co.uk

Sadly lockdep records when the irqs are re-enabled and then marks up the
fake lock as being irq-unsafe. Our hand is forced and so we must mark up
the entire fake lock critical section as irq-off.

Hopefully this is the last tweak required!

v2: Not quite, we need to mark the timeline spinlock as irqsafe. That
was a genuine bug being hidden by the earlier lockdep splat.

Fixes: d6773926 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823132700.25286-2-chris@chris-wilson.co.uk

Avoid calling i915_vma_put_fence() by using our alternate paths that
bind a secondary vma avoiding the original fenced vma. For the few
instances where we need to release the fence (i.e. on binding when the
GGTT range becomes invalid), replace the put_fence with a revoke_fence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk

When under severe stress for GTT mappable space, the LRU eviction model
falls off a cliff. We spend all our time scanning the much larger
non-mappable area searching for something within the mappable zone we can
evict. Turn this on its head by only using the full vma for the object if
it is already pinned in the mappable zone or there is sufficient *free*
space to accommodate it (prioritizing speedy reuse). If there is not,
immediately fall back to using small chunks (tilerow for GTT mmap, single
pages for pwrite/relocation) and using random eviction before doing a full
search.

Testcase: igt/gem_concurrent_blt
References: https://bugs.freedesktop.org/show_bug.cgi?id=110848Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821123234.19194-1-chris@chris-wilson.co.uk

Since commit 078dec33 ("dma-buf: add dma_fence_get_stub") the 0
fence context became an impossible match as it is used for an always
signaled fence. We can simplify our timeline tracking by knowing that 0
always means no match.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819184404.24200-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20190819175109.5241-1-chris@chris-wilson.co.uk

Let's wait with decision about importance of uC failure to
hardware initialization step.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-4-michal.wajdeczko@intel.com

Move the active tracking for the frontbuffer operations out of the
i915_gem_object and into its own first class (refcounted) object. In the
process of detangling, we switch from low level request tracking to the
easier i915_active -- with the plan that this avoids any potential
atomic callbacks as the frontbuffer tracking wishes to sleep as it
flushes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816074635.26062-1-chris@chris-wilson.co.uk

Convert the active_list manipulation of timelines to use spinlocks so
that we can perform the updates from underneath a quick interrupt
callback, if need be.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-2-chris@chris-wilson.co.uk

Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/

Since commit 6ca9a2be ("drm/i915: Unwind i915_gem_init() failure")
we believed that we correctly handle all errors encountered during
GuC initialization, including special one that indicates request to
run driver with disabled GPU submission (-EIO).

Unfortunately since commit 121981fa ("drm/i915/guc: Combine
enable_guc_loading|submission modparams") we stopped using that
error code to avoid unwanted fallback to execlist submission mode.

In result any GuC initialization failure was treated as non-recoverable
error leading to driver load abort, so we could not even read related
GuC error log to investigate cause of the problem.

For now always return -EIO on any uC hardware related failure.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-5-michal.wajdeczko@intel.com

We keep a global seed for the legacy BSD round-robin selector, but in
our testing of multiple simultaneous client workloads, a random seed
spreads the load more evenly. (As even as an initial round-robin selector
can be!) Removing the global is one less variable we have to find a home
for!

We can simulate multi-client (both same and mixed workloads) using
igt/gem_wsim to work out optimal strategies and then compare our
simulation with the actual transcoder on multi-engine machines. This
fixed round-robin turns out to be one of the worst methods.

No user is advised to use this method; the current suggestion is to use
a virtual engine for agnostic batches, randomised submission or using
the busyness tracking to select the most idle engine at the time of
dispatch. At the present time, intel-media is explicit, but libva still
seems to use it, with the exception of batches that must execute on vcs0.
Oh well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809091010.23281-2-chris@chris-wilson.co.uk

As we need to acquire a mutex to serialise the final
intel_wakeref_put, we need to ensure that we are in process context at
that time. However, we want to allow operation on the intel_wakeref from
inside timer and other hardirq context, which means that need to defer
that final put to a workqueue.

Inside the final wakeref puts, we are safe to operate in any context, as
we are simply marking up the HW and state tracking for the potential
sleep. It's only the serialisation with the potential sleeping getting
that requires careful wait avoidance. This allows us to retain the
immediate processing as before (we only need to sleep over the same
races as the current mutex_lock).

v2: Add a selftest to ensure we exercise the code while lockdep watches.
v3: That test was extremely loud and complained about many things!
v4: Not a whale!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295
References: https://bugs.freedesktop.org/show_bug.cgi?id=111245
References: https://bugs.freedesktop.org/show_bug.cgi?id=111256
Fixes: 18398904 ("drm/i915: Only recover active engines")
Fixes: 51fbd8de ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk

Ignore the central i915->kernel_context for allocating an engine, as
that GEM context is being phased out. For internal clients, we just need
the per-engine logical state, so allocate it at the point of use.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808110612.23539-1-chris@chris-wilson.co.uk

With its original name intel_drv.h the intel_display_types.h header was
superfluously cargo-cult included all over the place, while it's really
mostly about display internals. Remove the unnecessary includes.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e3d737f0ab87c55969e62c1e077e15c04c238297.1565085692.git.jani.nikula@intel.com

Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.

There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.

v2: fix the include guard name in the renamed file
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com

To maintain a fast lookup from a GT centric irq handler, we want the
engine lookup tables on the intel_gt. To avoid having multiple copies of
the same multi-dimension lookup table, move the generic user engine
lookup into an rbtree (for fast and flexible indexing).

v2: Split uabi_instance cf uabi_class
v3: Set uabi_class/uabi_instance after collating all engines to provide a
stable uabi across parallel unordered construction.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-2-chris@chris-wilson.co.uk

We do not notify userspace when the scheduler capabilities are changed
(due to wedging the driver) and as such userspace will expect the caps
to be static and unchanging. Make it so, and so we only need to compute
our caps once during driver registration.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-1-chris@chris-wilson.co.uk

As we increase the number of RCU objects, it becomes easier for us to
have several hundred thousand objects in the deferred RCU free queues.
An example is gem_ctx_create/files which continually creates active
contexts, which are not immediately freed upon close as they are kept
alive by outstanding requests. This lack of backpressure allows the
context objects to persist until they overwhelm and starve the system.
We can increase our backpressure by flushing the freed object queue upon
closing the device fd which should then not impact other clients.

Testcase: igt/gem_ctx_create/*files
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802212137.22207-2-chris@chris-wilson.co.uk

We don't have to immediately fail on WOPCM partitioning, we can wait
until we will start programming WOPCM registers. This should give us
more options if we decide to restore fallback in case of GuC failures.

v3: rebased
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-7-michal.wajdeczko@intel.com

Inject probe errors into intel_uc_init_hw to make sure we
correctly handle any uC initialization failure.

To avoid complains from CI about injected errors use
i915_probe_error to lower message level.

v4: rebased after moving hot fixes moved to separate patches
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-6-michal.wajdeczko@intel.com

With i915 added to i915_inject_probe_failure we can use dedicated
printk when injecting artificial load failure.

Also make this function look like other i915 functions that return
error code and make it more flexible to return any provided error
code instead of previously assumed -ENODEV.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-2-michal.wajdeczko@intel.com

We don't call the init_early function from within the gem code, so we
shouldn't do it for the cleanup either.

v2: while at it, s/gt_cleanup_early/gt_late_release (Chris)
v3: s/late_release/driver_late_release/ (Chris)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-1-daniele.ceraolospurio@intel.com

Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.

Fixes: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk
(cherry picked from commit 092be382)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Hide the details of MOCS setup from i915_gem by moving both current calls
into one in intel_mocs_init.

Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-21-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-6-lucas.demarchi@intel.com

Until Icelake, each engine had its own set of 64 MOCS registers. In
order to simplify, Tigerlake moves to only 64 Global MOCS registers,
which are no longer part of the engine context. Since these registers
are now global, they also only need to be initialized once.

>From Gen12 onwards, MOCS must specify the target cache (3:2) and LRU
management (5:4) fields and cannot be programmed to 'use the value from
Private PAT', because these fields are no longer part of the PPAT. Also
cacheability control (1:0) field has changed, 00 no longer means 'use
controls from page table', but uncacheable (UC).

v2 (Lucas):
    - Move the changes to the fault registers to a separate commit - the
      old ones overlap with the range used by the new global MOCS
      (requested by Daniele)
v3 (Lucas):
    - Clarify comment about setting the unused entries to the same value
      of index 0, that is the invalid entry (requested by Daniele)
    - Move changes to DONE_REG and ERROR_GEN6 to a separate commit
      (requested by Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NTomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-5-lucas.demarchi@intel.com

The register we write are not WOPCM regs but uC ones related to how
GuC and HuC are going to use the WOPCM, so it makes logical sense
for them to be programmed as part of uc_init_hw. The WOPCM map on the
other side is not uC-specific (although that is our main use-case), so
keep that separate.

v2: move write_and_verify to uncore, fix log, re-use err_out tag,
    add intel_wopcm_guc_base, fix log
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-2-daniele.ceraolospurio@intel.com

We only use the init_context vfunc once while recording the default
context state, and we use the same sequence in each backend (eliding
steps that do not apply). Remove the vfunc for simplicity and
de-duplication.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729113720.24830-1-chris@chris-wilson.co.uk

If the system is already idle, omit the GEM_TRACE saying we are about to
wait for idle. It looks confusing in the logs to see a continual stream
of wait-for-idle, as one immediately assumes it is stuck in a loop.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723091218.5886-1-chris@chris-wilson.co.uk

As recently disovered by forcing big-core (!llc) machines to use the GTT
paths, we need our full GTT write flush before manipulating the GTT PTE
or else the writes may be directed to the wrong page.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145407.21352-2-chris@chris-wilson.co.uk

Inside pread, we only ever read from the GTT so the serialising wmb()
instructions around the GGTT PTE updates are pointless.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145407.21352-1-chris@chris-wilson.co.uk

All the intel_uc_* can now be moved to work on the intel_uc structure
for better encapsulation of uc-related actions.

Note: I've introduced uc_to_gt instead of uc_to_i915 because the aim is
to move everything to be gt-focused in the medium term, so we would've
had to replace it soon anyway.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-8-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The "misc" terminology doesn't clearly explain what we intend to cover
in this phase. The only thing we used ot do in there apart from FW fetch
was initializing the log workqueue, with the latter being required only in
the very rare case where we enable the log relay. As we no longer create
our own workqueue, piggybacking on the system_highpri_wq instead, we can
rename the function to clarify that they only fetch/release the blobs.

v2: only create log wq when needed (Michal), reword commit msg
accordingly
v3: after rebase the wq is gone, reword commit msg accordingly
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-2-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk

Similar to the "_release" case, consistently replace mixed
"_cleanup"/"_fini"/"_fini_hw" components found in names of functions
called from i915_driver_remove() with "_remove" or "_driver_remove"
suffixes for better code readability.
Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-6-janusz.krzysztofik@linux.intel.com

Replace mixed "_fini"/"_cleanup"/"_cleanup_hw" suffixes found in names
of functions called from i915_driver_release() with "_release" suffix
consistently.  This provides better code readability, especially
helpful when trying to work out which phase the code is in.

Functions names starting with "i915_driver_", i.e., those defined in
drivers/gpu/dri/i915/i915_drv.c, just have their "cleanup" or "fini"
parts of their names replaced with the "_release" suffix, while names
of functions coming from other source files have been suffixed with
"_driver_release" to avoid ambiguity with other possible .release entry
points.

v2: early_probe pairs better with late_release (Chris)
v3: fix typo in commit message (Joonas)
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-5-janusz.krzysztofik@linux.intel.com

Use the "_probe" nomenclature not only in i915_driver_probe() helper
name but also in other related function / variable names for
consistency.  Only the userspace exposed name of a related module
parameter is left untouched.
Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com

As we have dropped the final reference to the object, we do not need to
wait until after the rcu grace period to drop its pages. We still require
struct_mutex to completely unbind the object to release the pages, so we
still need a free-worker to manage that from process context. By
scheduling the release of pages before waiting for the rcu should mean
that we are not trapping those pages from beyond the reach of the
shrinker.

v2: Pass along the request to skip if the vma is busy to the underlying
unbind routine, to avoid checking the reservation underneath the
i915->mm.obj_lock which may be used from inside irq context.

v3: Flip the bit for unbinding while active, for later convenience.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111035
Fixes: a93615f9 ("drm/i915: Throw away the active object retirement complexity")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-6-chris@chris-wilson.co.uk

Since the reset path wants to recover the engines itself, it only wants
to reinitialise the hardware using i915_gem_init_hw(). Pull the call to
intel_engines_resume() to the module init/resume path so we can avoid it
during reset.

Fixes: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk

Switch from passing the i915 container to newly named struct intel_gt.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625130128.11009-2-chris@chris-wilson.co.uk