- 28 5月, 2013 1 次提交
-
-
由 Christian Ohm 提交于
This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a too high usage maximum and logical maximum. This driver fixes the report descriptor so those values don't exceed HID_MAX_USAGES. Signed-off-by: NChristian Ohm <chr.ohm@gmx.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2013 1 次提交
-
-
由 Benjamin Tissoires 提交于
This driver was originally written by James McKenzie, updated by Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend support added. I ported it to the HID subsystem, in order to simplify it a litle and allow lirc to use it through hiddev. More recent versions of the IR receiver are also supported through a patch by Alex Karpenko. The patch also adds support for the 2nd and 5th generation of the controller, and the menu key on newer brushed metal remotes. Tested-by: NFabien André <fabien.andre@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 3月, 2013 1 次提交
-
-
由 Stefan Achatz 提交于
Userland-tools can already be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 2月, 2013 1 次提交
-
-
由 Vivien Didelot 提交于
The ThingM blink(1) is an open source hardware USB RGB LED. It contains an internal EEPROM, allowing to configure up to 12 light patterns. A light pattern is a RGB color plus a fade time. This driver registers a LED class instance with additional sysfs attributes to support basic functions such as setting RGB colors, fade and playing. Other functions are still accessible through the hidraw interface. At this time, the only documentation for the device is the firmware source code from ThingM, plus a few schematics. They are available at: https://github.com/todbot/blink1 This patch is version 3. It updates the name of the source file, the driver and the led sysfs entry, according to comments from Jiri Kosina and Simon Wood. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 1月, 2013 2 次提交
-
-
由 Jiri Kosina 提交于
We usually group drivers on a per-vendor basis, implementing device-specific deviations from the standard in vendor-specific driver. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Simon Wood 提交于
Add support the SRW-S1 by patching HID descriptor to read axis as Generic Desktop X, Y and Z (rather than Usage page being 'Simulation'). Signed-off-by: NSimon Wood <simon@mungewell.org> Tested-by: NJohn Murphy <rosegardener@freeode.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 11月, 2012 1 次提交
-
-
由 Benjamin Tissoires 提交于
Microsoft published the protocol specification of HID over i2c: http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx This patch introduces an implementation of this protocol. This implementation does not includes the ACPI part of the specification. This will come when ACPI 5.0 devices enumeration will be available. Once the ACPI part is done, OEM will not have to declare HID over I2C devices in their platform specific driver. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 10月, 2012 1 次提交
-
-
由 Bastien Nocera 提交于
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a key press and release for each joystick movement or button press or release. For example, moving the stick to the left will generate the "A" key being pressed and then released. A list of all the combinations is available in the iCade developer guide [2]. This driver hides all this and makes the device work as a generic joystick. [1]: http://www.ionaudio.com/products/details/icade [2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdfSigned-off-by: NBastien Nocera <hadess@hadess.net> Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds support for Roccat Lua gaming mouse. Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 10月, 2012 1 次提交
-
-
由 David Dillow 提交于
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 9月, 2012 1 次提交
-
-
由 srinivas pandruvada 提交于
Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
- 15 8月, 2012 1 次提交
-
-
由 Bruno Prémont 提交于
In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 7月, 2012 1 次提交
-
-
由 Tom Harwood 提交于
Corrects two HID descriptor issues, which prevent some Holtek based (USB ID 04d9:a055) keyboards from working. The error when not using the driver is: generic-usb: probe ... failed with error -22 . Signed-off-by: NTom Harwood <tomharwood@fastmail.fm> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 6月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds rupport for Roccat Savu gaming mouse. In comparison to the other Roccat modules I tried to move even more functionality to userland. Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 6月, 2012 1 次提交
-
-
由 David Herrmann 提交于
This adds a dummy driver that will support user-space I/O drivers for the HID subsystem. This allows to write transport-level drivers like USB-HID and Bluetooth-HID in user-space. Low-Energy Bluetooth needs this to feed HID data that is parsed in user-space back into the kernel. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 08 6月, 2012 1 次提交
-
-
由 Bernhard Seibold 提交于
This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports setting various device attributes, controlling mute and microphone mute LEDs and enables use of the microphone mute key. Signed-off-by: NBernhard Seibold <mail@bernhard-seibold.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 5月, 2012 1 次提交
-
-
由 Henrik Rydberg 提交于
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 4月, 2012 1 次提交
-
-
Devices like Aureal Cy se W-01RN USB_V3.1 and some derived hardware have a bogus HID Report Descriptor. According to that report descriptor, the maximum logical value for key events is 1 and not 101 (101 keys). This quirk fixes this wrong Report Descriptor. Signed-off-by: NJosenivaldo Benito Junior <jrbenito@benito.qsl.br> Signed-off-by: NFranco Catrin <fcatrin@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 2月, 2012 1 次提交
-
-
由 Andreas Hübner 提交于
The driver currently only supports the PS1000 controller. It fixes the report descriptor by removing a non-existing axis and clearing the constant bit on the d-pad and button input reports. Signed-off-by: NAndreas Hübner <andreas@k4n.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 2月, 2012 1 次提交
-
-
由 Jarod Wilson 提交于
This patch finishes off adding full support for the TiVo Slide remote, which is a mostly pure HID device from the perspective of the kernel. There are a few mappings that use a vendor-specific usage page, and a few keys in the consumer usage page that I think make sense to remap slightly, to better fit their key labels' intended use. Doing this in a stand-alone hid-tivo.c makes the modifications only matter for this specific device. What's actually connected to the computer is a Broadcom-made usb dongle, which has an embedded hub, bluetooth adapter, mouse and keyboard devices. You pair with the dongle, then the remote sends data that its converted into HID on the keyboard interface (the mouse interface doesn't do anything interesting, so far as I can tell). lsusb for this device: Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp. Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp. Bus 004 Device 003: ID 150a:1201 Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Speaking of the keyboard interface, the remote actually does contain a keyboard as well. The top slides away, revealing a reasonably functional qwerty keyboard (not unlike many slide cell phones), thus the product name. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 2月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
To cleanup Kconfig space and ease selection for users there is now a single entry that selects all roccat related drivers at once. Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 12月, 2011 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds support for Roccat Isku keyboard. Userland tools can be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 30 11月, 2011 1 次提交
-
-
由 Benjamin Tissoires 提交于
This patch merge the last old-style hid multitouch driver to the generic one. It also adds 2 more quanta pids. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 11月, 2011 5 次提交
-
-
由 David Herrmann 提交于
Add initializer and deinitializer for debugfs support. This will later allow raw eeprom access and direct DRM modifications to debug wiimote behaviour and further protocol reverse-engineerings. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 David Herrmann 提交于
The wiimote supports several extensions. This adds a separate source file which handles all extensions and can be disabled at compile-time. The driver reacts on "plug"-events on the extension port and starts a worker which initializes or deinitializes the extensions. Currently, the initialization logic is not fully understood and we can only detect and enable all extensions when all extensions are deactivated. Therefore, we need to disable all extensions, then detect and activate them again to react on "plug"-events. However, deactivating extensions will generate a new "plug"-event and we will never leave that loop. Hence, we only support extensions if they are plugged before the wiimote is connected (or before the ext-input device is opened). In the future we may support full extension hotplug support, but reverse-engineering this may take a while. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 David Herrmann 提交于
Extension and sound support for the wiimote are quite complex and will be implemented in separate source files. Hence rename the current driver to "-core" suffix so multiple files can be linked into this module. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Rename the Kconfig entry for hyperv mouse driver so that it has HID_ prefix as all the other drivers; while at it, place the entry for this driver to properly ordered place in Makefile and Kconfig. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 K. Y. Srinivasan 提交于
The file hid-hyperv.c implements a hid compliant mouse driver for use on a Hyper-V based system. This driver is currently in the staging area and as part of the effort to move this driver out of staging, I had posted the driver code for community review a few weeks ago. This current patch addresses all the review comments I have gotten to date. All the relevant patches have already been submitted to the staging tree as well. As per Greg's suggestion, this patch does not get rid of the code from the staging area. Once the mouse driver lands under the hid directory, we will cleanup the staging directory. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2011 1 次提交
-
-
由 Terry Lambert 提交于
Primax keyboards with the issue this driver addresses report modifier keys as in band key events instead of as out of band modifier bits, resulting in the modifier keys generating key up events immediately before the keys they are intended to modify. This driver rewrites the raw report data from such keyboards into USB HID 1.11 compliant report data. It only matches the USB vendor and product IDs for the keyboard it has been tested on. Since there are several keyboards, notably a number of laptops and folding USB keyboards known to have similar unresolved problem reports, the list is expected to grow. Signed-off-by: NTerry Lambert <tlambert@chromium.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 9月, 2011 1 次提交
-
-
由 Nestor Lopez Casado 提交于
With this driver, all the devices paired to a single Unifying receiver are exposed to user processes in separated /input/dev nodes. Keyboards with different layouts can be treated differently, Multiplayer games on single PC (like home theater PC) can differentiate input coming from different kbds paired to the same receiver. Up to now, when Logitech Unifying receivers are connected to a Linux based system, a single keyboard and a single mouse are presented to the HID Layer, even if the Unifying receiver can pair up to six compatible devices. The Unifying receiver by default multiplexes all incoming events (from multiple keyboards/mice) into these two. Signed-off-by: NNestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 8月, 2011 1 次提交
-
-
由 Michal Malý 提交于
The description of lg4ff driver has to be changed to reflect the fact that the driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been renamed to LOGIWHEELS_FF Signed-off-by: NMichal Malý <madcatxster@gmail.com> Signed-off-by: NSimon Wood <simon@mungewell.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 7月, 2011 1 次提交
-
-
由 David Herrmann 提交于
Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 6月, 2011 1 次提交
-
-
由 Anssi Hannula 提交于
Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Tested-by: NCleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 08 6月, 2011 1 次提交
-
-
由 Stefan Kriwanek 提交于
Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one place to another every now and then. The issue are relative motion events erroneously reported by the device, each having a distance value of +256. This 256 can in fact never occur due to real motion, therefore those events can safely be ignored. The driver also drops useless EV_REL events with a value of 0, that the device sends every time it sends an "real" EV_REL or EV_KEY event. Signed-off-by: NStefan Kriwanek <mail@stefankriwanek.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 4月, 2011 1 次提交
-
-
由 Benjamin Tissoires 提交于
This patch include MosArt devices into hid-multitouch. MosArt devices now support mt-protocol B. We also need to introduce a new quirk for mosart devices to support their contactID. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 24 3月, 2011 1 次提交
-
-
由 Benjamin Tissoires 提交于
This patch merges the hid-3m-pct driver into hid-multitouch. To keep devices working the same way they used to with hid-3m-pct, we need to add two signal/noise ratios for width and height. We also need to work on width/height to send proper ABS_MT_ORIENTATION flag. Importing 3M into hid-multitouch also solved the bug in which devices handling width and height in their report descriptors did not show ABS_MT_TOUCH_MAJOR and ABS_MT_TOUCH_MINOR. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Reviewed-by: NStéphane Chatty <chatty@enac.fr> Reviewed-and-tested-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 3月, 2011 2 次提交
-
-
由 Benjamin Tissoires 提交于
This patch merges hid-cando into the unified multitouch driver. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Reviewed-by: NStéphane Chatty <chatty@enac.fr> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
This patch merges hid-stantum to the generic multitouch driver. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr> Reviewed-by: NStéphane Chatty <chatty@enac.fr> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 3月, 2011 1 次提交
-
-
由 Richard Nauber 提交于
This patch merges the hid-egalax driver into hid-multitouch. There are two types of devices support by the hid-egalax driver: resistive and capacitive. Here, they are implicitly distinguished by the absence of a HID_DG_CONTACTCOUNT field in the latter, so no special code path needs to be introduced. As a side effect, this patch fixes the broken suspend/resume behavior in the old driver. [rydberg@euromail.se: minor fixups] Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 3月, 2011 1 次提交
-
-
由 Dmitry Torokhov 提交于
This device does not tolerate delayed opening and goes into a coma if we try to that. Ubuntu even has a crutch for udev that opened the device upon seeing it for the first time, but it did not work if we happened to boot with the device attached, since by the time userspace got around opening the device it was too late. Let's start the device immediately to deal with this issue. Reported-by: NSergei Kolzun <x0r@dv-life.ru> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-