- 09 2月, 2017 2 次提交
-
-
由 Quinn Tran 提交于
Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Current code merges qla_tgt_sess and fc_port structure into single fc_port structure representing same I-T nexus. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling of patch description ] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 15 12月, 2016 1 次提交
-
-
由 Michael Hernandez 提交于
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: NSawan Chandak <sawan.chandak@cavium.com> Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 18 11月, 2016 2 次提交
-
-
由 Johannes Thumshirn 提交于
Change FC drivers to use 'struct bsg_job' from bsg-lib.h instead of 'struct fc_bsg_job' from scsi_transport_fc.h and remove 'struct fc_bsg_job'. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Acked-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Johannes Thumshirn 提交于
Don't use fc_bsg_job::request and fc_bsg_job::reply directly, but use helper variables bsg_request and bsg_reply. This will be helpful when transitioning to bsg-lib. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 08 1月, 2016 2 次提交
-
-
由 Himanshu Madhani 提交于
This patch adds interface to send explicit LOGO explicit LOGO using using ELS commands from driver. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Himanshu Madhani 提交于
Following counters are added in target mode to help debugging efforts. Target Counters qla_core_sbt_cmd = 0 qla_core_ret_sta_ctio = 0 qla_core_ret_ctio = 0 core_qla_que_buf = 0 core_qla_snd_status = 0 core_qla_free_cmd = 0 num alloc iocb failed = 0 num term exchange sent = 0 num Q full sent = 0 Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 27 8月, 2015 5 次提交
-
-
由 Bart Van Assche 提交于
This patch removes 21 casts between an __iomem pointer type and another data type but also introduces five new casts (see also the casts with "__force"). Although this patch does not change any functionality, IMHO the code with __force casts needs further review. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Bart Van Assche 提交于
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Bart Van Assche 提交于
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Bart Van Assche 提交于
Detected these variables by building with W=1. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Bart Van Assche 提交于
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 25 7月, 2015 1 次提交
-
-
由 Alexei Potashnik 提交于
- keep qla_tgt_sess object on the session list until it's freed - modify use of sess->deleted flag to differentiate delayed session deletion that can be cancelled from irreversible one: QLA_SESS_DELETION_PENDING vs QLA_SESS_DELETION_IN_PROGRESS - during IN_PROGRESS deletion all newly arrived commands and TMRs will be rejected, existing commands and TMRs will be terminated when given by the core to the fabric or simply dropped if session logout has already happened (logout terminates all existing exchanges) - new PLOGI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - with the same port_name (with logout) - different port_name, different loop_id but the same port_id (with logout) - different port_name, different port_id, but the same loop_id (without logout) - additionally each new PLOGI will store imm notify iocb in the same port_name session being deleted. When deletion process completes this iocb will be acked. Only the most recent PLOGI iocb is stored. The older ones will be terminated when replaced. - new PRLI will initiate deletion of the following sessions (unless deletion is already IN_PROGRESS): - different port_name, different port_id, but the same loop_id (without logout) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: NAlexei Potashnik <alexei@purestorage.com> Acked-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 13 6月, 2015 1 次提交
-
-
由 Bart Van Assche 提交于
Detected by smatch. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 12 11月, 2014 1 次提交
-
-
由 Christoph Hellwig 提交于
Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Reviewed-by: NHannes Reinecke <hare@suse.de>
-
- 25 9月, 2014 3 次提交
-
-
由 Arun Easi 提交于
A chip reset can occur after driver submits command to the stack. Abort command processing if a chip reset has occurred or in progress when you get a follow up for a command. Signed-off-by: NArun Easi <arun.easi@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Joe Carnuccio 提交于
Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 18 7月, 2014 1 次提交
-
-
由 Hannes Reinecke 提交于
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: NHannes Reinecke <hare@suse.de> Reviewed-by: NChristoph Hellwig <hch@infradead.org> Reviewed-by: NEwan Milne <emilne@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 19 5月, 2014 3 次提交
-
-
由 Quinn Tran 提交于
Add support for T10-Dif for Target Mode to qla driver. The driver will look for firmware attribute that support this feature. When the feature is present, the capabilities will be report to TCM layer. Add CTIO CRC2 iocb to build T10-Dif commands. Add support routines to process good & error cases. Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Joe Carnuccio 提交于
For ISP27xx use the request/response queue index shadow registers to avoid directly access them on the PCI bus. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Armen Baloyan 提交于
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 16 3月, 2014 4 次提交
-
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Armen Baloyan 提交于
Send aborts to the firmware via the request/response queue mechanism. Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Armen Baloyan 提交于
Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 03 9月, 2013 2 次提交
-
-
由 Joe Carnuccio 提交于
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: NJoe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Atul Deshmukh 提交于
[jejb: checkpatch fixes] Signed-off-by: NAtul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 23 7月, 2013 1 次提交
-
-
由 Saurav Kashyap 提交于
This fixes a regression where Xyratex controllers and disks were lost by the driver: https://bugzilla.kernel.org/show_bug.cgi?id=59601Reported-by: NJack Hill <jackhill@jackhill.us> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Cc: <stable@vger.kernel.org> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 09 7月, 2013 2 次提交
-
-
由 Bart Van Assche 提交于
Since the value of cur_seg is not used and since scsi_prot_sglist() has no side effects it is safe to remove the statement "cur_seg = scsi_port_sglist(cmd)". Detected by Coverity. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 12 4月, 2013 1 次提交
-
-
由 Giridhar Malavali 提交于
[jejb: fix up checkpatch issues] Signed-off-by: NAndrew Vazquez <andrew.vasquez@qlogic.com> Signed-off-by: NArmen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 22 2月, 2013 2 次提交
-
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Base the number of outstanding requests the driver will keep track of on the available resources instead of being hard-coded. Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 30 11月, 2012 2 次提交
-
-
由 Andrew Vasquez 提交于
Original code was not corrected for ISP83xx support. Instead code should used the cached reference from the req_que structure, rather than the legacy 'if (ISP-TYPE(X))... else if (ISP-TYPE(Y))...' codes. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Saurav Kashyap 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 24 9月, 2012 3 次提交
-
-
由 Arun Easi 提交于
Signed-off-by: NArun Easi <arun.easi@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Chad Dupuis 提交于
Update the driver copyright from 2003-2011 to 2003-2012. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
由 Saurav Kashyap 提交于
[jejb: merge fix for introduced warning] Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 15 9月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling typo within qla2xxx files. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-