Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 25 7月, 2023 1 次提交
  3. 23 5月, 2023 2 次提交
  5. 17 2月, 2023 6 次提交
  7. 18 11月, 2022 2 次提交
  9. 02 11月, 2022 1 次提交
  11. 29 9月, 2022 1 次提交
  13. 04 8月, 2022 1 次提交
  15. 26 5月, 2022 1 次提交
  17. 19 5月, 2022 1 次提交
  19. 14 1月, 2022 3 次提交
  21. 19 10月, 2021 2 次提交
  23. 15 10月, 2021 1 次提交
  25. 06 7月, 2021 1 次提交
    • J
      usb: dwc3: debugfs: Add and remove endpoint dirs dynamically · 58251724
      由 Jack Pham 提交于 
      stable inclusion
from stable-5.10.46
commit e52d43c82f2f6556f0b7a790c19c072c1e99a95f
bugzilla: 168323
CVE: NA

--------------------------------

commit 8d396bb0 upstream.

The DWC3 DebugFS directory and files are currently created once
during probe.  This includes creation of subdirectories for each
of the gadget's endpoints.  This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().

However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked.  Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later.  And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.

So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.

Fixes: 41ce1456 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: NPeter Chen <peter.chen@kernel.org>
Signed-off-by: NJack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      58251724
  27. 03 7月, 2021 2 次提交
    • W
      usb: dwc3: gadget: Disable gadget IRQ during pullup disable · 2e0277dc
      由 Wesley Cheng 提交于 
      stable inclusion
from stable-5.10.44
commit 9e0677c2e39052ac20efae4474bb20614d9a88c9
bugzilla: 109295
CVE: NA

--------------------------------

commit 82129373 upstream.

Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events.  Endpoint events can still be generated.  Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)

Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.

Fixes: ae7e8610 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: NWesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      2e0277dc
    • J
      usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL · 3a56871d
      由 Jack Pham 提交于 
      stable inclusion
from stable-5.10.44
commit 851dee5a5da56564a70290713aee665403bb0b24
bugzilla: 109295
CVE: NA

--------------------------------

commit 03715ea2 upstream.

There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind.  Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.

The exact scenario can be reproduced as follows:
 - Start DWC3 in peripheral mode
 - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
 - Run FunctionFS userspace application (open EPs, write descriptors, etc)
 - Bind gadget driver to DWC3's UDC
 - Switch DWC3 to host mode
   => dwc3_gadget_exit() is called. usb_del_gadget() will put the
	ConfigFS driver instance on the gadget_driver_pending_list
 - Stop FunctionFS application (closes the ep files)
 - Switch DWC3 to peripheral mode
   => dwc3_gadget_init() fails as usb_add_gadget() calls
	check_pending_gadget_drivers() and attempts to rebind the UDC
	to the ConfigFS gadget but fails with -19 (-ENODEV) because the
	FFS instance is not in FFS_ACTIVE state (userspace has not
	re-opened and written the descriptors yet, i.e. desc_ready!=0).
 - Switch DWC3 back to host mode
   => dwc3_gadget_exit() is called again, but this time dwc->gadget
	is invalid.

Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.

Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.

Fixes: e81a7018 ("usb: dwc3: allocate gadget structure dynamically")
Cc: <stable@vger.kernel.org>
Reviewed-by: NPeter Chen <peter.chen@kernel.org>
Signed-off-by: NJack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      3a56871d
  29. 15 6月, 2021 1 次提交
  31. 03 6月, 2021 7 次提交
  33. 22 4月, 2021 1 次提交
  35. 13 4月, 2021 2 次提交
  37. 09 4月, 2021 2 次提交
  39. 27 1月, 2021 2 次提交