The purpose of the test was to check per-engine resets would fallback to
the global reset when required, but first we actually need a test for a
basic i915_handle_error()!

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170728112110.6464-1-chris@chris-wilson.co.uk

When we started following the backlight minimum brightness in
6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
we overlooked the brightness invert quirk. Even if we invert the
brightness, we need to take the min limit into account. We probably
missed this because the invert has only been required on gen4 for proper
operation.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101127
Fixes: 6dda730e ("drm/i915: respect the VBT minimum backlight brightness")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170531083355.7898-1-jani.nikula@intel.com

In order for us to successfully detect the end of a timeslice,
preemption must be disabled. Otherwise, inside the loop we may be
preempted many times without our noticing, and each time our timeslice
will be reset, invalidating need_resched()
Reported-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: NTomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 290271de ("drm/i915: Spin for struct_mutex inside shrinker")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104135.26805-1-chris@chris-wilson.co.ukTested-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Use sysfs_attr_init() to dynamically initialise the
oa_config->sysfs_metric_id.attr as it has the important side-effect of
setting the lockdep key.

[    4.971513] [drm] Initialized i915 1.6.0 20170731 for 0000:00:02.0 on minor 0
[    4.973489] BUG: key ffff88026f6e7bb0 not in .data!
[    4.973506] DEBUG_LOCKS_WARN_ON(1)
[    4.973518] ------------[ cut here ]------------
[    4.973547] WARNING: CPU: 1 PID: 258 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[    4.973567] Modules linked in: i915(+) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii mei lpc_ich prime_numbers i2c_hid pinctrl_broxton pinctrl_intel
[    4.973645] CPU: 1 PID: 258 Comm: systemd-udevd Not tainted 4.13.0-rc3-CI-CI_DRM_2915+ #1
[    4.973664] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016
[    4.973686] task: ffff8802704c2740 task.stack: ffffc90000224000
[    4.973700] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[    4.973712] RSP: 0018:ffffc90000227a10 EFLAGS: 00010282
[    4.973726] RAX: 0000000000000016 RBX: ffff880262aac010 RCX: 0000000000000000
[    4.973741] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810ed1ab
[    4.973757] RBP: ffffc90000227a30 R08: 0000000000000001 R09: 0000000000000000
[    4.973774] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88026f6e7bb0
[    4.973789] R13: 0000000000000000 R14: ffff88026f6e7b98 R15: ffffffff81a24da0
[    4.973805] FS:  00007f588d7f58c0(0000) GS:ffff88027fc80000(0000) knlGS:0000000000000000
[    4.973823] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.973837] CR2: 00000082482e32a0 CR3: 0000000270531000 CR4: 00000000003406e0
[    4.973852] Call Trace:
[    4.973864]  __kernfs_create_file+0x71/0xe0
[    4.973876]  sysfs_add_file_mode_ns+0x85/0x1a0
[    4.973890]  internal_create_group+0xe5/0x2b0
[    4.973903]  sysfs_create_group+0xe/0x10
[    4.973985]  i915_perf_register+0xd9/0x220 [i915]
[    4.974044]  i915_driver_load+0xa72/0x16b0 [i915]
[    4.974124]  i915_pci_probe+0x32/0x90 [i915]

Annoyingly detected by CI, but not reported due to it occurring during boot
and disabling lockdep for later runs.

Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Andrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803223700.10329-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>

This WA is required when decoupled frequencies for slice and unslice
are enabled. This disables DOP clock gating for skl.

v2: enable the WA for all gen9 platforms (not just for SKL GT4 where
    the hang issue is originally reported) to avoid rare hangs (David)
v3: as per WaDatabase, enable it only for SKL (Rodrigo)

Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NPraveen Paneri <praveen.paneri@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501781530-8186-1-git-send-email-praveen.paneri@intel.com

No functional change.

KBP was based on SPT and spec wasn't clear about the full name.
There was the initial point of the "Point" confusion.

Later the split with Coffee Lake and Cannon Lake both using CNP
and also some uncertainty from the specs we had at that time
made us to propagated the mistake along.

So, let's fix this now and avoid propagating these wrong
"points".

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185220.758-1-rodrigo.vivi@intel.com

The motivation behind this new interface is expose at runtime the
creation of new OA configs which can be used as part of the i915 perf
open interface. This will enable the kernel to learn new configs which
may be experimental, or otherwise not part of the core set currently
available through the i915 perf interface.

v2: Drop DRM_ERROR for userspace errors (Matthew)
    Add padding to userspace structure (Matthew)
    s/guid/uuid/ (Matthew)

v3: Use u32 instead of int to iterate through registers (Matthew)

v4: Lock access to dynamic config list (Lionel)

v5: by Matthew:
    Fix uninitialized error values
    Fix incorrect unwiding when opening perf stream
    Use kmalloc_array() to store register
    Use uuid_is_valid() to valid config uuids
    Declare ioctls as write only
    Check padding members are set to 0
    by Lionel:
    Return ENOENT rather than EINVAL when trying to remove non
    existing config

v6: by Chris:
    Use ref counts for OA configs
    Store UUID in drm_i915_perf_oa_config rather then using pointer
    Shuffle fields of drm_i915_perf_oa_config to avoid padding

v7: by Chris
    Rename uapi pointers fields to end with '_ptr'

v8: by Andrzej, Marek, Sebastian
    Update register whitelisting
    by Lionel
    Add more register names for documentation
    Allow configuration programming in non-paranoid mode
    Add support for value filter for a couple of registers already
    programmed in other part of the kernel

v9: Documentation fix (Lionel)
    Allow writing WAIT_FOR_RC6_EXIT only on Gen8+ (Andrzej)

v10: Perform read access_ok() on register pointers (Lionel)
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NAndrzej Datczuk <andrzej.datczuk@intel.com>
Reviewed-by: NAndrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-2-lionel.g.landwerlin@intel.com

It makes things easier to read when implementing whitelisting in the
following patches.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com

We already do it on Haswell and the documentation says it saves power.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-5-lionel.g.landwerlin@intel.com

There will be a need for userspaces configurations to set this
register. We can apply the same model inside the kernel for test
configs.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-4-lionel.g.landwerlin@intel.com

In the following commit we'll introduce loadable userspace
configs. This change reworks how configurations are handled in the
perf driver and retains only the test configurations in kernel space.

We now store the test config in dev_priv and resolve the id only once
when opening the perf stream. The OA config is then handled through a
pointer to the structure holding the configuration details.

v2: Rework how test configs are handled (Lionel)

v3: Use u32 to hold number of register (Matthew)

v4: Removed unused dev_priv->perf.oa.current_config variable (Matthew)

v5: Lock device when accessing exclusive_stream (Lionel)

v6: Ensure OACTXCONTROL is always reprogrammed (Lionel)

v7: Switch a couple of index variable from int to u32 (Matthew)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-3-lionel.g.landwerlin@intel.com

We were reserving fewer dwords in the ring than necessary. Indeed
we're always writing all registers once, so discard the actual number
of registers given by the user and just program the whitelisted ones
once.

Fixes: 19f81df2 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reported-by: NMatthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com

Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file or
device_{remove/create}_bin_file. The corresponding arguments are of
type const, so declare the structures to be const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501694447-14356-1-git-send-email-bhumirks@gmail.com

bdw_load_gamma_lut is writing beyond the array to the maximum value.
The intend of the function is to clamp values > 1 to 1, so write
the intended color to the max register.

This fixes the following KASAN warning:

[  197.020857] [IGT] kms_pipe_color: executing
[  197.063434] [IGT] kms_pipe_color: starting subtest ctm-0-25-pipe0
[  197.078989] ==================================================================
[  197.079127] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079188] Read of size 2 at addr ffff8800d38db150 by task kms_pipe_color/1839
[  197.079208] CPU: 2 PID: 1839 Comm: kms_pipe_color Tainted: G     U 4.13.0-rc1-patser+ #5211
[  197.079215] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
[  197.079220] Call Trace:
[  197.079230]  dump_stack+0x68/0x9e
[  197.079239]  print_address_description+0x6f/0x250
[  197.079251]  kasan_report+0x216/0x370
[  197.079374]  ? bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079451]  ? gen8_write16+0x4e0/0x4e0 [i915]
[  197.079460]  __asan_report_load2_noabort+0x14/0x20
[  197.079535]  bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[  197.079612]  broadwell_load_luts+0x1df/0x550 [i915]
[  197.079690]  intel_color_load_luts+0x7b/0x80 [i915]
[  197.079764]  intel_begin_crtc_commit+0x138/0x760 [i915]
[  197.079783]  drm_atomic_helper_commit_planes_on_crtc+0x1a3/0x820 [drm_kms_helper]
[  197.079859]  ? intel_pre_plane_update+0x571/0x580 [i915]
[  197.079937]  intel_update_crtc+0x238/0x330 [i915]
[  197.080016]  intel_update_crtcs+0x10f/0x210 [i915]
[  197.080092]  intel_atomic_commit_tail+0x1552/0x3340 [i915]
[  197.080101]  ? _raw_spin_unlock+0x3c/0x40
[  197.080110]  ? __queue_work+0xb40/0xbf0
[  197.080188]  ? skl_update_crtcs+0xc00/0xc00 [i915]
[  197.080195]  ? trace_hardirqs_on+0xd/0x10
[  197.080269]  ? intel_atomic_commit_ready+0x128/0x13c [i915]
[  197.080329]  ? __i915_sw_fence_complete+0x5b8/0x6d0 [i915]
[  197.080336]  ? debug_object_activate+0x39e/0x580
[  197.080397]  ? i915_sw_fence_await+0x30/0x30 [i915]
[  197.080409]  ? __might_sleep+0x15b/0x180
[  197.080483]  intel_atomic_commit+0x944/0xa70 [i915]
[  197.080490]  ? refcount_dec_and_test+0x11/0x20
[  197.080567]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080597]  ? drm_atomic_crtc_set_property+0x303/0x580 [drm]
[  197.080674]  ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[  197.080704]  drm_atomic_commit+0xd7/0xe0 [drm]
[  197.080722]  drm_atomic_helper_crtc_set_property+0xec/0x130 [drm_kms_helper]
[  197.080749]  drm_mode_crtc_set_obj_prop+0x7d/0xb0 [drm]
[  197.080775]  drm_mode_obj_set_property_ioctl+0x50b/0x5d0 [drm]
[  197.080783]  ? __might_fault+0x104/0x180
[  197.080809]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080838]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080861]  drm_ioctl_kernel+0x154/0x1a0 [drm]
[  197.080885]  drm_ioctl+0x624/0x8f0 [drm]
[  197.080910]  ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[  197.080934]  ? drm_getunique+0x210/0x210 [drm]
[  197.080943]  ? __handle_mm_fault+0x1bd0/0x1ce0
[  197.080949]  ? lock_downgrade+0x610/0x610
[  197.080957]  ? __lru_cache_add+0x15a/0x180
[  197.080967]  do_vfs_ioctl+0xd92/0xe40
[  197.080975]  ? ioctl_preallocate+0x1b0/0x1b0
[  197.080982]  ? selinux_capable+0x20/0x20
[  197.080991]  ? __do_page_fault+0x7b7/0x9a0
[  197.080997]  ? lock_downgrade+0x5bb/0x610
[  197.081007]  ? security_file_ioctl+0x57/0x90
[  197.081016]  SyS_ioctl+0x4e/0x80
[  197.081024]  entry_SYSCALL_64_fastpath+0x18/0xad
[  197.081030] RIP: 0033:0x7f61f287a987
[  197.081035] RSP: 002b:00007fff7d44d188 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  197.081043] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f61f287a987
[  197.081048] RDX: 00007fff7d44d1c0 RSI: 00000000c01864ba RDI: 0000000000000003
[  197.081053] RBP: 00007f61f2b3eb00 R08: 0000000000000059 R09: 0000000000000000
[  197.081058] R10: 0000002ea5c4a290 R11: 0000000000000246 R12: 00007f61f2b3eb58
[  197.081063] R13: 0000000000001010 R14: 00007f61f2b3eb58 R15: 0000000000002702

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101659Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NMartin Peres <martin.peres@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Fixes: 82cf435b ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Kiran S Kumar <kiran.s.kumar@intel.com>
Cc: Kausal Malladi <kausalmalladi@gmail.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20170724091431.24251-1-maarten.lankhorst@linux.intel.comReviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just a simple code cleanup, below commit forgot to remove a
function which it made unused:

 commit eaa14c24
 Author: Chris Wilson <chris@chris-wilson.co.uk>
 Date:   Wed Oct 19 13:52:03 2016 +0100

  drm/i915: Stop reporting error details in dmesg as well as the error-state

  As we already capture all the information from the registers into the
  error-state, also dumping that to dmesg just generates noise that upsets
  CI and users alike (and doesn't provide us with any more information).

v2: Chris Wilson dag out the relevant commit. Commit msg updated.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170727110113.16942-1-tvrtko.ursulin@linux.intel.com

If we fail at punit communication, include both the mbox address and the
value we tried to write so that we can identify the invalid sequence.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170728085022.1586-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The hdmi bits simply don't exist, so nerf them. I think audio doesn't
work on gen3 at all, and for the limited color range we should
probably use the colorimetry sdvo paramater instead of the bit in the
port.

But fixing sdvo isn't my goal, I just want to get the backtrace out of
the way, and this takes care of that.

Still, while at it fix the missing read-out of the gen4 audio bit,
maybe that part even works ...

v2: Instead of trying to plug the damage in ->compute_config() make
sure we never set intel_sdvo->is_hdmi, which stops the bad state at
the source. Suggested by Chris Wilson. Also make sure we don't break
this by accident by putting a WARN_ON in place.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726193251.25393-1-daniel.vetter@ffwll.ch

lockdep complaints about a locking recursion for the i2c bus lock
because both the sdvo ddc proxy bus and the gmbus nested within use
the same locking class. It's not really a deadlock since we never nest
the other way round, but it's annoying.

Fix it by pulling the gmbus locking into the i2c lock_ops for both
i2c_adapater and making sure that the ddc_proxy_xfer function is
entirely lockless.

Re-layouting the extracted function resulted in some whitespace
cleanups, I figured we might as well keep them.

v2: Review from Chris:
- s/locked/unlocked/ since I got the naming backwards
- Use the vfuncs of the proxied adatper instead of re-rolling copies.
  That's more consistent with the other proxying we're doing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726132647.31833-1-daniel.vetter@ffwll.ch

When we hold for the lock for swapping out the shmem pages for the
physically contiguous pages, we have to call the unlocked version of
get_pages!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101934
Fixes: 35d23516946e ("drm/i915: Make i915_gem_object_phys_attach() use obj->mm.lock more appropriately")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726181602.23527-2-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prevent a forward declaration in the next patch.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726181602.23527-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we don't need the struct_mutex to acquire the object's pages, call
i915_gem_object_pin_pages() before we bind the object into the GGTT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726160038.29487-3-chris@chris-wilson.co.ukSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Actually transferring from shmemfs to the physically contiguous set of
pages should be wholly guarded by its obj->mm.lock!

v2: Remember to free the old pages.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726160038.29487-2-chris@chris-wilson.co.ukSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reduce acquisition of struct_mutex to the critical regions that must
hold it; for KMS, we need struct_mutex currently only for the purpose of
pinning/unpinning the framebuffer's VMA into the global GTT. This allows
us to avoid taking the struct_mutex when disabling the CRTC (i.e. NULL
framebuffer objects) before a reset. (Not yet achieving the full goal of
avoiding the strut_mutex nesting, but good enough to break the first
half of the reset deadlock.)

v2: Keep pages pinning inside struct_mutex for the moment.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170726160038.29487-1-chris@chris-wilson.co.uk
[danvet: Drop another case of grabbing dev->struct_mutex around
cleanup_planes, which popped up because I had to redo the drm-next
backmerge for entirely different reasons. Acked by Chris on irc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When reading the i915_energy_uJ debugfs file, it tries to fetch
MSR_RAPL_POWER_UNIT, which might not be available, like in a vm
environment, causing the exception shown below.

We can easily prevent it by doing a rdmsrl_safe read instead, which will
handle the exception, allowing us to abort the debugfs file read.

This was caught by the new igt@debugfs_test@read_all_entries testcase in
the CI.

  unchecked MSR access error: RDMSR from 0x606 at rIP:0xffffffffa0078f66
    (i915_energy_uJ+0x36/0xb0 [i915])
  Call Trace:
   seq_read+0xdc/0x3a0
   full_proxy_read+0x4f/0x70
   __vfs_read+0x23/0x120
   ? putname+0x4f/0x60
   ? rcu_read_lock_sched_held+0x75/0x80
   ? entry_SYSCALL_64_fastpath+0x5/0xb1
   vfs_read+0xa0/0x150
   SyS_read+0x44/0xb0
   entry_SYSCALL_64_fastpath+0x1c/0xb1
  RIP: 0033:0x7f1f5e9f4500
  RSP: 002b:00007ffc77e65cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: ffffffff8146e003 RCX: 00007f1f5e9f4500
  RDX: 0000000000000200 RSI: 00007ffc77e65d10 RDI: 0000000000000006
  RBP: ffffc900007abf88 R08: 0000000001eaff20 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000000000000006 R14: 0000000000000005 R15: 0000000001eb94db
   ? __this_cpu_preempt_check+0x13/0x20

v2:
 - Drop unsigned long long cast and improve calculation (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101901Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/87o9s7zrx3.fsf@dilma.collabora.co.ukReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The goal here was to minimise doing any thing or any check inside the
kernel that was not strictly required. For a userspace that assumes
complete control over the cache domains, the kernel is usually using
outdated information and may trigger clflushes where none were
required.

However, swapping is a situation where userspace has no knowledge of the
domain transfer, and will leave the object in the CPU cache. The kernel
must flush this out to the backing storage prior to use with the GPU. As
we use an asynchronous task tracked by an implicit fence for this, we
also need to cancel the ASYNC flag on the object so that the object will
wait for the clflush to complete before being executed. This also absolves
userspace of the responsibility imposed by commit 77ae9957 ("drm/i915:
Enable userspace to opt-out of implicit fencing") that its needed to ensure
that the object was out of the CPU cache prior to use on the GPU.

Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: NJason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I was being overly paranoid in not updating the execobject.offset after
performing the fallback copy where we set reloc.presumed_offset to -1.
The thinking was to ensure that a subsequent NORELOC execbuf would be
forced to process the invalid relocations. However this is overkill so
long as we *only* update the execobject.offset following a successful
update of the relocation value witin the batch. If we have to repeat the
execbuf due to a later interruption, then we may skip the relocations on
the second pass (honouring NORELOC) since the execobject.offset match
the actual offsets (even though reloc.presumed_offset is garbage).

Subsequent calls to execbuf with NORELOC should themselves ensure that
the reloc.presumed_offset have been corrected in case of future
migration.

Reporting back the actual execobject.offset, even when
reloc.presumed_offset is garbage, ensures that reuse of those objects
use the latest information to avoid relocations.

Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-4-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we fail to acquire a fence (for old school fenced GPU access) then we
unwind the vma reservation, including its pin. However, we were making
the execobject as holding the pin before erring out, leading to a double
unpin:

[ 3193.991802] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:287!
[ 3193.998131] invalid opcode: 0000 [#1] PREEMPT SMP
[ 3194.002816] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers ptp pps_core [last unloaded: i915]
[ 3194.022841] CPU: 0 PID: 8123 Comm: kms_flip Tainted: G     U          4.13.0-rc1-CI-CI_DRM_471+ #1
[ 3194.031765] Hardware name: Dell Inc. OptiPlex 755                 /0PU052, BIOS A04 11/05/2007
[ 3194.040343] task: ffff8800785d4c40 task.stack: ffffc90001768000
[ 3194.046339] RIP: 0010:eb_release_vmas.isra.6+0x119/0x180 [i915]
[ 3194.052234] RSP: 0018:ffffc9000176ba80 EFLAGS: 00010246
[ 3194.057439] RAX: 00000000000003c0 RBX: ffff8800710fc2d8 RCX: ffff8800588e4f48
[ 3194.064546] RDX: ffffffff1fffffff RSI: 00000000ffffffff RDI: ffff8800588e00d0
[ 3194.071654] RBP: ffffc9000176bab0 R08: 0000000000000000 R09: 0000000000000000
[ 3194.078761] R10: 0000000000000040 R11: 0000000000000001 R12: ffff880060822f00
[ 3194.085867] R13: 0000000000000310 R14: 00000000000003b8 R15: ffffc9000176bbb0
[ 3194.092975] FS:  00007fd2b94aba40(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000
[ 3194.101033] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3194.106754] CR2: 00007ffbec3ff000 CR3: 0000000074e67000 CR4: 00000000000006f0
[ 3194.113861] Call Trace:
[ 3194.116321]  eb_relocate_slow+0x67/0x4e0 [i915]
[ 3194.120861]  i915_gem_do_execbuffer+0x429/0x1260 [i915]
[ 3194.126070]  ? lock_acquire+0xb5/0x210
[ 3194.129803]  ? __might_fault+0x39/0x90
[ 3194.133563]  i915_gem_execbuffer2+0x9b/0x1b0 [i915]
[ 3194.138447]  ? i915_gem_execbuffer+0x2b0/0x2b0 [i915]
[ 3194.143478]  drm_ioctl_kernel+0x64/0xb0
[ 3194.147298]  drm_ioctl+0x2cd/0x390
[ 3194.150710]  ? i915_gem_execbuffer+0x2b0/0x2b0 [i915]
[ 3194.155741]  ? finish_task_switch+0xa5/0x210
[ 3194.159993]  ? finish_task_switch+0x6a/0x210
[ 3194.164247]  do_vfs_ioctl+0x90/0x670
[ 3194.167806]  ? entry_SYSCALL_64_fastpath+0x5/0xb1
[ 3194.172492]  ? __this_cpu_preempt_check+0x13/0x20
[ 3194.177176]  ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 3194.181946]  SyS_ioctl+0x3c/0x70
[ 3194.185159]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 3194.189756] RIP: 0033:0x7fd2b76a8587
[ 3194.193314] RSP: 002b:00007fff074845b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 3194.200855] RAX: ffffffffffffffda RBX: ffffffff8146da43 RCX: 00007fd2b76a8587
[ 3194.207962] RDX: 00007fff074846e0 RSI: 0000000040406469 RDI: 0000000000000003
[ 3194.215068] RBP: ffffc9000176bf88 R08: 0000000000000000 R09: 0000000000000003
[ 3194.222175] R10: 00007fd2b796bb58 R11: 0000000000000246 R12: 00007fff07484880
[ 3194.229280] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000000000000
[ 3194.236386]  ? __this_cpu_preempt_check+0x13/0x20
[ 3194.241070] Code: 24 b0 00 00 00 48 85 c9 0f 84 6c ff ff ff 8b 41 20 85 c0 7e 73 83 e8 01 89 41 20 41 8b 84 24 e8 00 00 00 a8 0f 0f 85 5f ff ff ff <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d f3 c3 49 8b 84
[ 3194.259943] RIP: eb_release_vmas.isra.6+0x119/0x180 [i915] RSP: ffffc9000176ba80
[ 3194.268047] ---[ end trace 1d7348c6575d8800 ]---
[ 3673.658819] softdog: Initiating panic
[ 3673.662471] Kernel panic - not syncing: Software Watchdog Timer expired
[ 3673.669066] Kernel Offset: disabled
[ 3673.672541] Rebooting in 1 seconds..
Reported-by: NTomi Sarvela <tomi.p.sarvela@intel.com>
Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-3-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After we detect a i915_vma pin overflow, we call __i915_vma_unpin to
cleanup. However, on an overflow the pin_count bitfield will be zero,
triggering an assertion, even though we the intention is to merely warn
and report the error back to the user (as historically the culprit has
be a leak in the display code).

Fixes: 20dfbde4 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The condition for setting the Loadgen Select bit of
PORT_TX_DW4 register during DDI Vswing Sequence should be
Bit rate <=6 GHz whereas the existing code checks only
Bit Rate < 6GHz. This patch fixes this condition.
While at it also remove the redundant paranthesis.

Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500329122-32662-1-git-send-email-manasi.d.navare@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I wrote this code an year and a half ago and I couldn't exactly
remember the main differences of these two structures when reviewing a
new FBC patch. Add some comments to help explain what's the purpose of
each struct.

For the record, the original commits are:
 b183b3f1 ("drm/i915/fbc: introduce struct intel_fbc_reg_params")
 aaf78d27 ("drm/i915/fbc: introduce struct intel_fbc_state_cache")

Cc: Praveen Paneri <praveen.paneri@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714193822.12121-1-paulo.r.zanoni@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

* Don't define it twice.
* Define MSBs first, like the rest of i915_reg.h.
* Add CNL_ prefix to the bit that arrived in CNL.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714175228.27019-1-paulo.r.zanoni@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After applying af2788925ae0 ("drm/i915: Squelch reset messages during
selftests") out of sequence, I missed fixing up a call to i915_reset().
Reported-by: Nkbuild test robot <kbuild-all@01.org>
Fixes: af2788925ae0 ("drm/i915: Squelch reset messages during selftests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725125336.11969-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During our selftests, we try reseting the GPU tens of thousands of
times, flooding the dmesg with our reset spam drowning out any potential
warnings. Add an option to i915_reset()/i915_reset_engine() to specify a
quiet reset for selftesting.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721123238.16428-19-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Extract the common barrier against rogue hangchecks from disrupting our
direct testing of resets, and in the process expand the lock to include
the per-engine reset shortcuts.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721123238.16428-17-chris@chris-wilson.co.ukReviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the request has been completed before the reset took effect, we don't
need to mark it up as being a victim. Touching fence->error after the
fence has been signaled is detected by dma_fence_set_error() and
triggers a BUG:

[  231.743133] kernel BUG at ./include/linux/dma-fence.h:434!
[  231.743156] invalid opcode: 0000 [#1] SMP KASAN
[  231.743172] Modules linked in: i915 drm_kms_helper drm iptable_nat nf_nat_ipv4 nf_nat x86_pkg_temp_thermal iosf_mbi i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea fb font fbdev [last unloaded: drm]
[  231.743221] CPU: 2 PID: 20 Comm: kworker/2:0 Tainted: G     U          4.13.0-rc1+ #52
[  231.743236] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[  231.743363] Workqueue: events_long i915_hangcheck_elapsed [i915]
[  231.743382] task: ffff8801f42e9780 task.stack: ffff8801f42f8000
[  231.743489] RIP: 0010:i915_gem_reset_engine+0x45a/0x460 [i915]
[  231.743505] RSP: 0018:ffff8801f42ff770 EFLAGS: 00010202
[  231.743521] RAX: 0000000000000007 RBX: ffff8801bf6b1880 RCX: ffffffffa02881a6
[  231.743537] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff8801bf6b18c8
[  231.743551] RBP: ffff8801f42ff7c8 R08: 0000000000000001 R09: 0000000000000000
[  231.743566] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801edb02d00
[  231.743581] R13: ffff8801e19d4200 R14: 000000000000001d R15: ffff8801ce2a4000
[  231.743599] FS:  0000000000000000(0000) GS:ffff8801f5a80000(0000) knlGS:0000000000000000
[  231.743614] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  231.743629] CR2: 00007f0ebd1add10 CR3: 0000000002621000 CR4: 00000000000406e0
[  231.743643] Call Trace:
[  231.743752]  i915_gem_reset+0x6c/0x150 [i915]
[  231.743853]  i915_reset+0x175/0x210 [i915]
[  231.743958]  i915_reset_device+0x33b/0x350 [i915]
[  231.744061]  ? valleyview_pipestat_irq_handler+0xe0/0xe0 [i915]
[  231.744081]  ? trace_hardirqs_off_caller+0x70/0x110
[  231.744102]  ? _raw_spin_unlock_irqrestore+0x46/0x50
[  231.744120]  ? find_held_lock+0x119/0x150
[  231.744138]  ? mark_lock+0x6d/0x850
[  231.744241]  ? gen8_gt_irq_ack+0x1f0/0x1f0 [i915]
[  231.744262]  ? work_on_cpu_safe+0x60/0x60
[  231.744284]  ? rcu_read_lock_sched_held+0x57/0xa0
[  231.744400]  ? gen6_read32+0x2ba/0x320 [i915]
[  231.744506]  i915_handle_error+0x382/0x5f0 [i915]
[  231.744611]  ? gen6_rps_reset_ei+0x20/0x20 [i915]
[  231.744630]  ? vsnprintf+0x128/0x8e0
[  231.744649]  ? pointer+0x6b0/0x6b0
[  231.744667]  ? debug_check_no_locks_freed+0x1a0/0x1a0
[  231.744688]  ? scnprintf+0x92/0xe0
[  231.744706]  ? snprintf+0xb0/0xb0
[  231.744820]  hangcheck_declare_hang+0x15a/0x1a0 [i915]
[  231.744932]  ? engine_stuck+0x440/0x440 [i915]
[  231.744951]  ? rcu_read_lock_sched_held+0x57/0xa0
[  231.745062]  ? gen6_read32+0x2ba/0x320 [i915]
[  231.745173]  ? gen6_read16+0x320/0x320 [i915]
[  231.745284]  ? intel_engine_get_active_head+0x91/0x170 [i915]
[  231.745401]  i915_hangcheck_elapsed+0x3d8/0x400 [i915]
[  231.745424]  process_one_work+0x3e8/0xac0
[  231.745444]  ? pwq_dec_nr_in_flight+0x110/0x110
[  231.745464]  ? do_raw_spin_lock+0x8e/0x120
[  231.745484]  worker_thread+0x8d/0x720
[  231.745506]  kthread+0x19e/0x1f0
[  231.745524]  ? process_one_work+0xac0/0xac0
[  231.745541]  ? kthread_create_on_node+0xa0/0xa0
[  231.745560]  ret_from_fork+0x27/0x40
[  231.745581] Code: 8b 7d c8 e8 49 0d 02 e1 49 8b 7f 38 48 8b 75 b8 48 83 c7 10 e8 b8 89 be e1 e9 95 fc ff ff 4c 89 e7 e8 4b b9 ff ff e9 30 ff ff ff <0f> 0b 0f 1f 40 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fe
[  231.745767] RIP: i915_gem_reset_engine+0x45a/0x460 [i915] RSP: ffff8801f42ff770

At first glance this looks to be related to commit c64992e0
("drm/i915: Look for active requests earlier in the reset path"), but it
could easily happen before as well. On the other hand, we no longer
logged victims due to the active_request being dropped earlier.

v2: Be trickier to unwind the incomplete request as we cannot rely on
request retirement for the lockless per-engine reset.
v3: Reprobe the active request at the time of the reset.
Reported-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Fixes: c64992e0 ("drm/i915: Look for active requests earlier in the reset path")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721123238.16428-15-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We require the caller to ensure that the packets they wish to emit into
the CS ring are qword aligned (i.e. have an even number of dwords).
Double check this.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721161101.1618-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch sets the is_hdmi2_src identifier in drm connector
for GLK platform. GLK contains a native HDMI 2.0 controller.
This identifier will help the EDID handling functions to save
lot of work which is specific to HDMI 2.0 sources.

V3: Added this patch
V4: Rebase
V4: Rebase
V5: Added r-b from Ander
V6: Rebase
V7: Rebase
V8: Rebase
V9: Added r-b from Ville
V9: Added r-b from Imre

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-7-git-send-email-shashank.sharma@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When output colorspace is YCBCR420, we have to load the
corresponding colorspace in AVI infoframe. This patch fills
the colorspace of AVI infoframe as per the output mode.

V2: Rebase
V3: Rebase
V4: Rebase
V5: Added r-b from Ander
V6: Checking RGB/YCBCR420 output only (Ville)
V7: Add colorspace info in driver(not drm layer) (Ville)
V8: Rebase
V9: Added r-b from Ville
V10: Added r-b from Imre

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-6-git-send-email-shashank.sharma@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To support ycbcr output, we need a pipe CSC block to do
RGB->YCBCR conversion.

Current Intel platforms have only one pipe CSC unit, so
we can either do color correction using it, or we can perform
RGB->YCBCR conversion.

This function adds a csc handler, which uses recommended bspec
values to perform RGB->YCBCR conversion (target color space BT709)

V2: Rebase
V3: Rebase
V4: Rebase
V5: Addressed review comments from Ander
    - Remove extra line added in the patch
    - Add the spec details in the commit message
    - Combine two if(cond) while calling intel_crtc_compute_config
V6: Handle YCBCR420 outputs only (Ville)
V7: Addressed review comments from Ville:
    - Add description about target colorspace
    - Remove the comments from CSC function
    - DRM_DEBUG->DEBUG_KMS for atomic failure due to CSC unit busy
    - Remove unnecessary debug message about YCBCR420 possibe
V8: Addressed review comments from Ville:
    - Remove extra comment, not required.
    - Do not add extra variable for CTM, reuse pipe_config
    Added r-b from Ville
V9: Remove extra whitespace (Imre)
V10: Added r-b from Imre

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-5-git-send-email-shashank.sharma@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>