The --state option is to show task state when switched out.  The state
is printed as a single character like in the /proc but I added 'I' for
idle state rather than 'R'.

  $ perf sched timehist --state | head
  Samples do not have callchains.
      time cpu task name              wait time sch delay run time state
               [tid/pid]                 (msec)    (msec)   (msec)
  -------- --- ----------------------- -------- ------------------ -----
  1.753791 [3] <idle>                     0.000     0.000    0.000     I
  1.753834 [1] perf[27469]                0.000     0.000    0.000     S
  1.753904 [3] perf[27470]                0.000     0.006    0.112     S
  1.753914 [1] <idle>                     0.000     0.000    0.079     I
  1.753915 [3] migration/3[23]            0.000     0.002    0.011     S
  1.754287 [2] <idle>                     0.000     0.000    0.000     I
  1.754335 [2] transmission[1773/1739]    0.000     0.004    0.047     S
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170113104523.31212-2-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Separate thread wait time into 3 parts - sleep, iowait and preempt based
on the prev_state of the last event.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170113104523.31212-1-namhyung@kernel.org
[ Fix the build on centos:5 where 'wait' shadows a global declaration ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In 2059fc7a ("perf symbols: Allow forcing reading of non-root owned
files by root") 'perf report' was added the option of forcing reading of
non-root owned symbol file.

This add the same behavior for perf script.
Reported-by: NMark Drayton <mbd@fb.com>
Signed-off-by: NYannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20170113182527.18625-1-scientist@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The "--dump-raw-script" is not a valid option, replace it with the valid
one, "--dump-raw-trace"
Signed-off-by: NMichael Petlan <mpetlan@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 133dc4c3 ("perf: Rename 'perf trace' to 'perf script'")
LPU-Reference: 728644547.14560155.1484320012612.JavaMail.zimbra@redhat.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds missing member names to struct initializations.

Although in C99 for struct S {int x, int y} two init codes struct S s =
{.x = (a), (b)} and struct S s = {.x = (a), .y = (b)} are the same, it
is better to explicitly write .y (.argh in this patch) for readability
and robustness against language/compiler evolutions.
Signed-off-by: NSoramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170113215623.32fb1ac2d862af0048c30fe6@m.soramichi.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Don't warn for feature-dwarf==0 if user explicitily disabled DWARF by
using NO_DWARF=1.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170112210159.76143-1-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move the scale factor parsing code to an own function to reuse it in an
upcoming patch.

v2: Return error in case strdup returns NULL.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170103150833.6694-2-andi@firstfloor.org
[ Keep returning -ENOMEM when strdup() fails in perf_pmu__parse_scale()/convert_scale() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Improve __kernel_text_address()/kernel_text_address() to return
true if the given address is on a kprobe's instruction slot
trampoline.

This can help stacktraces to determine the address is on a
text area or not.

To implement this atomically in is_kprobe_*_slot(), also change
the insn_cache page list to an RCU list.

This changes timings a bit (it delays page freeing to the RCU garbage
collection phase), but none of that is in the hot path.

Note: this change can add small overhead to stack unwinders because
it adds 2 additional checks to __kernel_text_address(). However, the
impact should be very small, because kprobe_insn_pages list has 1 entry
per 256 probes(on x86, on arm/arm64 it will be 1024 probes),
and kprobe_optinsn_pages has 1 entry per 32 probes(on x86).
In most use cases, the number of kprobe events may be less
than 20, which means that is_kprobe_*_slot() will check just one entry.
Tested-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox
[ Improved the changelog and coding style. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-4.11-20170111' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Add more triggers to switch the output file (perf.data.TIMESTAMP).

  Now, in addition to switching to a different output file when
  receiving a SIGUSR2, one can also specify file size and time based
  triggers:

       perf record -a --switch-output=signal

  is equivalent to what we had before:

       perf record -a --switch-output

  While we can also ask for the file to be "sliced" by size, taking
  into account that that will happen only when we get woken up by
  the kernel, i.e. one has to take into account the --mmap-pages (the
  size of the perf mmap ring buffer):

       perf record -a --switch-output=2G

  will break the perf.data output into multiple files limited to 2GB
  of samples, right when generating the output.

  For time based samples, alert() will be used, so to have 1 minute
  limited perf.data output files:

      perf record -a --switch-output=1m

  (Jiri Olsa)

- Remove the need to use -e only for syscalls and --event only for
  tracepoints/HW/SW/etc events, i.e. now one can use:

      perf trace -e nanosleep,futex,sched:sched_switch ./workload

  or:

      perf trace --event nanosleep,futex,sched:sched_switch ./workload

  And have it tracing raw_syscalls:sys_{enter,exit} for the nanosleep
  and futex syscalls, formatting those as strace does while also
  tracing sched:sched_switch, ordering it all into one strace like
  output.

  Using '!' as the first character in the -e/--event argument remains
  a way to negate the list of syscalls, i.e. all syscalls except for
  the ones specified, doesn't affect the other kinds of events.

  E.g:

  [root@jouet ~] # perf trace -e sched:sched_switch,nanosleep usleep 1
     0.000 ( 0.028 ms): usleep/28150 nanosleep(rqtp: 0x7ffe4201b9f0) ...
     0.028 (         ): sched:sched_switch:usleep:28150 [120] S ==> swapper/0:0 [120])
     0.000 ( 0.065 ms): usleep/28150  ... [continued]: nanosleep()) = 0
  [root@jouet ~]#

  (Arnaldo Carvalho de Melo)

- 'perf kallsyms' toy tool to look for extended symbol information on
  the running kernel and demonstrate the machine/thread/symbol APIs for
  use in other tools, such as 'perf probe' (Arnaldo Carvalho de Melo)

Infrastructure improvements:

- Add missing linux/kernel.h include to subcmd.h (Arnaldo Carvalho de Melo)
  tools: Sync x86's vmx.h with the kernel

- Create libdir directory before installing libperf-jvmti.so (Laura Abbott)

- Fix typo in perf_evlist__start_workload() (Soramichi Akiyama)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

To pick the changes from:

  1b07304c ("KVM: nVMX: support descriptor table exits")

That adds entries to VMX_EXIT_REASONS, that is used by
tools/perf/arch/x86/util/kvm-stat.c.

This also picks the changes in:

  1dc35dac ("KVM: nVMX: check host CR3 on vmentry and vmexit")

But these are not used in 'perf kvm stat', do it just to silence the
kernel/tools file cache coherency detector:

  $ make -C tools/perf
  make: Entering directory '/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-56uowkk8t5zje49a42asffcy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's now possible to specify the threshold time for perf.data like:

  $ perf record --switch-output=30s ...

Once it's reached, the current data are dumped in to the
perf.data.<timestamp> file and session does on.

  $ perf record --switch-output=30s ...
  [ perf record: dump data: Woken up 44 times ]
  [ perf record: Dump perf.data.2017010213043746 ]
  ...

The time is expected to be a number with appended unit
character - s/m/h/d.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding switch-output size warning if the requested
size of lower than the wakeup ring buffer size.

  $ perf record --switch-output=1K ls
  WARNING: switch-output data size lower than wakeup kernel buffer size (258K) expect bigger perf.data sizes
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Suggested-and-Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's now possible to specify the threshold size for perf.data like:

  $ perf record --switch-output=2G ...

Once it's reached, the current data are dumped in to the
perf.data.<timestamp> file and session does on.

  $ perf record --switch-output=2G ...
  [ perf record: dump data: Woken up 7244 times ]
  [ perf record: Dump perf.data.2017010214093746 ]
  ...

The size is expected to be a number with appended unit character -
B/K/M/G.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Next patches will add --switch-output option arguments, changing the
option to allow that and adding its default value to 'signal'.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Next patches will add more --switch-output option arguments,
so preparing the data holder.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add unit_number__scnprintf function to display size units and use it in
-m option info message.

Before:
  $ perf record -m 10M ls
  rounding mmap pages size to 16777216 bytes (4096 pages)
  ...

After:
  $ perf record -m 10M ls
  rounding mmap pages size to 16M (4096 pages)
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-2-git-send-email-jolsa@kernel.org
[ Rename it to unit_number__scnprintf for consistency ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes a typo: s/enable to/unable to/
Signed-off-by: NSoramichi AKIYAMA <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: bcf3145f ("perf evlist: Enhance perf_evlist__start_workload()")
Link: http://lkml.kernel.org/r/20170110200006.e1f7a766b4faf1f107ae2e1b@m.soramichi.jp
[ Wasn't applying, fixed it up by hand, added Fixes: tag ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Makes it easier to specify both events and syscalls (to be formatter
strace-like), i.e. previously one would have to do:

  # perf trace -e nanosleep --event sched:sched_switch usleep 1

Now it is possible to do:

  # perf trace -e nanosleep,sched:sched_switch usleep 1
     0.000 ( 0.021 ms): usleep/17962 nanosleep(rqtp: 0x7ffdedd61ec0) ...
     0.021 (         ): sched:sched_switch:usleep:17962 [120] S ==> swapper/1:0 [120])
     0.000 ( 0.066 ms): usleep/17962  ... [continued]: nanosleep()) = 0
  #

The old style --expr and using both -e and --event continues to work.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ieg6bakub4657l9e6afn85r4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its similar to doing grep on a /proc/kallsyms, but it also shows extra
information like the path to the kernel module and the unrelocated
addresses in it, to help in diagnosing problems.

It is also helps demonstrate the use of the symbols routines so that
tool writers can use them more effectively.

Using it:

  $ perf kallsyms e1000_xmit_frame netif_rx usb_stor_set_xfer_buf
  e1000_xmit_frame: [e1000e] /lib/modules/4.9.0+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko 0xffffffffc046fc10-0xffffffffc0470bb0 (0x19c80-0x1ac20)
  netif_rx: [kernel] [kernel.kallsyms] 0xffffffff916f03a0-0xffffffff916f0410 (0xffffffff916f03a0-0xffffffff916f0410)
  usb_stor_set_xfer_buf: [usb_storage] /lib/modules/4.9.0+/kernel/drivers/usb/storage/usb-storage.ko 0xffffffffc057aea0-0xffffffffc057af19 (0xf10-0xf89)
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-79bk9pakujn4l4vq0f90klv3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To reduce the boilerplate for searching for functions in the running
kernel and modules.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-93iqzayafpaxaguoiwjqezgz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As it was getting the BUILD_BUG_ON_ZERO() definition by luck.

Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-dh71o31ar72ajck8o2x4aoae@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The install command for libperf-jvmti.so does not check if libdir exists
before installing. This means that when the install command is run:

install libperf-jvmti.so '/tmp/test_root/usr/lib64';

libperf-jvmti.so will get installed to /usr/lib64 as a file and break
further installation. Fix this by ensuring the directory gets created
first.

See https://bugzilla.redhat.com/show_bug.cgi?id=1410296Signed-off-by: NLaura Abbott <labbott@redhat.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: d4dfdf00 ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/1483741088-13543-1-git-send-email-labbott@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When x86_pmu.num_counters is 32 the shift of the integer constant 1 is
exceeding 32bit and therefor undefined behaviour.

Fix this by shifting 1ULL instead of 1.

Reported-by: CoverityScan CID#1192105 ("Bad bit shift operation")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170111114310.17928-1-colin.king@canonical.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

hswep_uncore_cpu_init() uses a hardcoded physical package id 0 for the boot
cpu. This works as long as the boot CPU is actually on the physical package
0, which is normaly the case after power on / reboot.

But it fails with a NULL pointer dereference when a kdump kernel is started
on a secondary socket which has a different physical package id because the
locigal package translation for physical package 0 does not exist.

Use the logical package id of the boot cpu instead of hard coded 0.

[ tglx: Rewrote changelog once more ]

Fixes: cf6d445f ("perf/x86/uncore: Track packages, not per CPU data")
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1483628965-2890-1-git-send-email-prarit@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The conversion of Intel PMU drivers into modules did not include reference
counting. The machine will crash when attempting to  access deleted code
if an event from a module PMU is started and the module removed before the
event is destroyed.

i.e. this crashes the machine:

	$ insmod intel-rapl-perf.ko
	$ perf stat -e power/energy-cores/ -C 0 &
	$ rmmod intel-rapl-perf.ko

Set THIS_MODULE to pmu->module in Intel module PMUs so that generic code
can handle reference counting and deny rmmod while an event still exists.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1482455860-116269-1-git-send-email-davidcc@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo-4.10-20170104' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo:

Fixes:

  - Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira)

  - Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo)

  - Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo)

  - Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo)

  - Fix 'perf record --switch-output' documentation and comment (Jiri Olsa)

  - Fix 'perf probe' for cross arch probing (Masami Hiramatsu)

Improvement:

  - Show total scheduling time in 'perf sched timehist' (Namhyumg Kim)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).

gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it).  For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.

E.g. Without this:

  $ perf probe -k build-arm/vmlinux -F __slab_alloc*
  __slab_alloc.constprop.9
  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc+0

If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.

With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:

  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc.constprop.9+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix --funcs (-F) option to show correct symbols for offline module.
Since previous perf-probe uses machine__findnew_module_map() for offline
module, even if user passes a module file (with full path) which is for
other architecture, perf-probe always tries to load symbol map for
current kernel module.

This fix uses dso__new_map() to load the map from given binary as same
as a map for user applications.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Those are binaries as well, so should be installed by:

  make -C tools/perf install-bin'

too.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, the sched:sched_switch tracepoint reports deadline tasks with
priority -1. But when reading the trace via perf script I've got the
following output:

  # ./d & # (d is a deadline task, see [1])
  # perf record -e sched:sched_switch -a sleep 1
  # perf script
      ...
         swapper     0 [000]  2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295]
               d  2593 [000]  2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295]

The task d reports the wrong priority [4294967295]. This happens because
the "int prio" is stored in an unsigned long long val. Although it is
set as a %lld, as int is shorter than unsigned long long,
trace_seq_printf prints it as a positive number.

The fix is just to cast the val as an int, and print it as a %d,
as in the sched:sched_switch tracepoint's "format".

The output with the fix is:

  # ./d &
  # perf record -e sched:sched_switch -a sleep 1
  # perf script
      ...
         swapper     0 [000]  4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1]
               d 10941 [000]  4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120]

[1] d.c

 ---
  #include <stdio.h>
  #include <unistd.h>
  #include <sys/syscall.h>
  #include <linux/types.h>
  #include <linux/sched.h>

  struct sched_attr {
	__u32 size, sched_policy;
	__u64 sched_flags;
	__s32 sched_nice;
	__u32 sched_priority;
	__u64 sched_runtime, sched_deadline, sched_period;
  };

  int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags)
  {
	return syscall(__NR_sched_setattr, pid, attr, flags);
  }

  int main(void)
  {
	struct sched_attr attr = {
		.size		= sizeof(attr),
		.sched_policy	= SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */
		.sched_runtime	= 10 * 1000 * 1000,
		.sched_period	= attr.sched_deadline = 30 * 1000 * 1000,
	};

	if (sched_setattr(0, &attr, 0) < 0) {
		perror("sched_setattr");
		return -1;
	}

	for(;;);
  }
 ---

Committer notes:

Got the program from the provided URL, http://bristot.me/lkml/d.c,
trimmed it and included in the cset log above, so that we have
everything needed to test it in one place.
Signed-off-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/866ef75bcebf670ae91c6a96daa63597ba981f0d.1483443552.git.bristot@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no --signal-trigger option, also adding the code comment into
record man page.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no need for this one to be global.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To allow string options with a default argument and variable set when
the option is used.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.

In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.

This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.

E.g. without this (on x86_64, and target module is arm32):

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup :configfs_lookup+0
                          ^-Here is an empty module name.

With this fix, you can see correct module name:

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup configfs:configfs_lookup+0
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull DAX updates from Dan Williams:
 "The completion of Jan's DAX work for 4.10.

  As I mentioned in the libnvdimm-for-4.10 pull request, these are some
  final fixes for the DAX dirty-cacheline-tracking invalidation work
  that was merged through the -mm, ext4, and xfs trees in -rc1. These
  patches were prepared prior to the merge window, but we waited for
  4.10-rc1 to have a stable merge base after all the prerequisites were
  merged.

  Quoting Jan on the overall changes in these patches:

     "So I'd like all these 6 patches to go for rc2. The first three
      patches fix invalidation of exceptional DAX entries (a bug which
      is there for a long time) - without these patches data loss can
      occur on power failure even though user called fsync(2). The other
      three patches change locking of DAX faults so that ->iomap_begin()
      is called in a more relaxed locking context and we are safe to
      start a transaction there for ext4"

  These have received a build success notification from the kbuild
  robot, and pass the latest libnvdimm unit tests. There have not been
  any -next releases since -rc1, so they have not appeared there"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  ext4: Simplify DAX fault path
  dax: Call ->iomap_begin without entry lock during dax fault
  dax: Finish fault completely when loading holes
  dax: Avoid page invalidation races and unnecessary radix tree traversals
  mm: Invalidate DAX radix tree entries only if appropriate
  ext2: Return BH_New buffers for zeroed blocks

Pull documentation fixes from Jonathan Corbet:
 "Two small fixes:

   - A merge error on my part broke the DocBook build. I've
     requisitioned one of tglx's frozen sharks for appropriate
     disciplinary action and resolved to be more careful about testing
     the DocBook stuff as long as it's still around.

   - Fix an error in unaligned-memory-access.txt"

* tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux:
  Documentation/unaligned-memory-access.txt: fix incorrect comparison operator
  docs: Fix build failure

Pull crypto fix from Herbert Xu:
 "This fixes a boot failure on some platforms when crypto self test is
  enabled along with the new acomp interface"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: testmgr - Use heap buffer for acomp test input

 mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
  mm/filemap.c:933:9: error: too few arguments to function 'test_bit'
    return test_bit(PG_waiters);
         ^~~~~~~~

Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()')
Signed-off-by: NOlof Johansson <olof@lixom.net>
Brown-paper-bag-by: NLinus Torvalds <dummy@duh.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>