This is a driver for the G200 server engines chips,
it doesn't driver any of the Matrix G series desktop cards.

It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards.

Its based on previous work done my Matthew Garrett but remodelled
to follow the same style and flow as the AST server driver. It also
works along the same lines as the AST server driver wrt memory management.

There is no userspace driver planned, xf86-video-modesetting should be used.
It also appears these GPUs have no ARGB hw cursors.

v2: add missing tagfifo reset + G200 SE memory bw setup pieces.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is the initial driver for the Aspeed Technologies chips found in
servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It
doesn't support the AST11xx due to lack of hw to test it on, and them requiring
different codepaths.

This driver is intended to be used with xf86-video-modesetting in userspace.

This driver has a slightly different design than other KMS drivers, but
future server chips will probably share similiar setup. As these GPUs commonly
have low video RAM, it doesn't make sense to put the kms console in VRAM
always. This driver places the kms console into system RAM, and does dirty
updates to a copy in video RAM. When userspace sets a new scanout buffer,
it forcefully evicts the video RAM console, and X can create a framebuffer
that can use all of of video RAM.

This driver uses TTM but in a very simple fashion to control the eviction
to system RAM of the console, and multiple servers.

v2: add s/r support, fix Kconfig.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reported by sfr on -next merge.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since Matthew's efi/vga changes on non-EFI machines we were failing
to tell the vgaarb/switcheroo what the default device was, this
sets the default device in the quirk if none has been set before.

This fixes the switcheroo on my T410s.

Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'topic/vga-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into drm-core-next

* 'topic/vga-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  vga_switcheroo: Add the support for audio clients
  vga_switcheroo: Introduce struct vga_switcheroo_client_ops
  vga_switcheroo: Refactor using linked list

Use defined macros by the way.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add the support for audio clients to VGA-switcheroo for handling the
HDMI audio controller together with VGA switching.  The id of the
audio controller should be given explicitly at registration time
unlike the video controller.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43155Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This changes the API as a clean-up.  Instead of passing multiple
function pointers at each time, introduce a new struct holding the
whole callback functions and pass it to the registration.

The same struct will be used for the upcoming audio client
registration, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Refactor the code base a bit for the further work to adapt more clients.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'drm-intel-next-2012-05-06-merged' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next

Daniel says

Highlights:
- sparse fixes from Ben.
- tons of little cleanups from Chris all over: tiling_changed
 clarification, deferred_free list removal, ...
- fix up irq handler on gen2 & gen3 + related cleanups from Chris
- prep work for wait_rendering_timeout from Ben with some nice
 refactorings
- first set of infoframe fixes from Paulo for doubleclocked CEA modes
- improve pch pll handling from Jesse and Chris
- gpu hangman, this also contains the reset fix for gen4
- rps sanity check from Chris - this papers over issues when the gpu fails
 to clock up on snb/ivb, and it is shockingly easy to hit. The code
 prints a big WARN backtrace and restores the hw to a sane state. The
 real fix is still in the works.

Atm I'm aware of 2 regressions in -next:
- One of the gmbus patches (not gmbus itself) regressed lvds detection on
 a MacbookPro. I've analyzed the bug already and I think I know what's
 going on, patch is awaiting test feedback.
- Just today QA reported that DP on ilk regressed. That bug is fresh of
 the press and still awaiting detailed logfiles and the bisect result.
 The only thing that's clear atm is that -fixes works and -next doesn't.

Previously these functions would assume that vma->vm_file was the
drm_file.  Although if in some cases if the drm driver needs to use
something else for the backing file (such as the tmpfs filp) then this
assumption is no longer true.  But vma->vm_private_data is still the
GEM object.

With this change, now the drm_device comes from the GEM object rather
than the drm_file so the driver is more free to play with vma->vm_file.

The scenario where this comes up is for mmap'ing of cached dmabuf's
for non-coherent systems, where the driver needs to use fault handling
and PTE shootdown to simulate coherency.  We can't use the vma->vm_file
of the dmabuf, which is using anon_inode's address_space.  The most
straightforward thing to do is to use the GEM object's obj->filp for
vma->vm_file in all cases, for which we need this patch.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Keep this as a patch of its own in case of bug reports.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We don't need to check these - they are always going to be the
same for any PVR based device.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Cover all D2xxx/N2xxx chips.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
[Hand applied to upstream driver]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We have a lot of debug type stuff we don't actually need any more.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

All the conditional ugly register selection really wants to be
cleaned up. Use a struct describing each pipe and its registers.

This will also let us hide some of the oddments between platforms
for any future merging of bits together. In particular the way the
DPLL and FP registers randomly wander around.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We have lots of local assignments that can now be eliminated
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This starts the move away from lots of confused unions of per driver stuff
inherited when we merged the drivers together.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

/ssd/git/drm-core-next/drivers/gpu/drm/radeon/radeon_fence.c: In function ‘radeon_debugfs_fence_info’:
/ssd/git/drm-core-next/drivers/gpu/drm/radeon/radeon_fence.c:606:7: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘long long int’ [-Wformat]
Signed-off-by: NDave Airlie <airlied@redhat.com>

No need to malloc it any more.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we don't store local data into global variables
it isn't necessary to lock anything.

v2: rebased on new SA interface
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It never really belonged there in the first place.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We can now protected the semaphore ram by a
fence, so free it immediately.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It isn't necessary any more and the suballocator seems to perform
even better.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Directly use the suballocator to get small chunks of memory.
It's equally fast and doesn't crash when we encounter a GPU reset.

v2: rebased on new SA interface.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A startover with a new idea for a multiple ring allocator.
Should perform as well as a normal ring allocator as long
as only one ring does somthing, but falls back to a more
complex algorithm if more complex things start to happen.

We store the last allocated bo in last, we always try to allocate
after the last allocated bo. Principle is that in a linear GPU ring
progression was is after last is the oldest bo we allocated and thus
the first one that should no longer be in use by the GPU.

If it's not the case we skip over the bo after last to the closest
done bo if such one exist. If none exist and we are not asked to
block we report failure to allocate.

If we are asked to block we wait on all the oldest fence of all
rings. We just wait for any of those fence to complete.

v2: We need to be able to let hole point to the list_head, otherwise
    try free will never free the first allocation of the list. Also
    stop calling radeon_fence_signalled more than necessary.

v3: Don't free allocations without considering them as a hole,
    otherwise we might lose holes. Also return ENOMEM instead of ENOENT
    when running out of fences to wait for. Limit the number of holes
    we try for each ring to 3.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use one wait queue for all rings. When one ring progress, other
likely does to and we are not expecting to have a lot of waiter
anyway.

Also add a fence_wait_any that will wait until the first fence
in the fence array (one fence per ring) is signaled. This allow
to wait on all rings.

v2: some minor cleanups and improvements.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Define the interface without modifying the allocation
algorithm in any way.

v2: rebase on top of fence new uint64 patch
v3: add ring to debugfs output
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Allocating and freeing it seperately.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of offset + size keep start and end offset directly.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Dumping the current allocations.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make the suballocator self containing to locking.

v2: split the bugfix into a seperate patch.
v3: remove some unreleated changes.
Sig-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of hacking the calculation multiple times.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>