- 06 10月, 2017 11 次提交
-
-
由 Stefan Hajnoczi 提交于
This patch adds the sock_diag interface for querying sockets from userspace. Tools like ss(8) and netstat(8) can use this interface to list open sockets. The userspace ABI is defined in <linux/vm_sockets_diag.h> and includes netlink request and response structs. The request can query sockets based on their sk_state (e.g. listening sockets only) and the response contains socket information fields including the local/remote addresses, inode number, etc. This patch does not dump VMCI pending sockets because I have only tested the virtio transport, which does not use pending sockets. Support can be added later by extending vsock_diag_dump() if needed by VMCI users. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
There are two state fields: socket->state and sock->sk_state. The socket->state field uses SS_UNCONNECTED, SS_CONNECTED, etc while the sock->sk_state typically uses values that match TCP state constants (TCP_CLOSE, TCP_ESTABLISHED). AF_VSOCK does not follow this convention and instead uses SS_* constants for both fields. The sk_state field will be exposed to userspace through the vsock_diag interface for ss(8), netstat(8), and other programs. This patch switches sk_state to TCP state constants so that the meaning of this field is consistent with other address families. Not just AF_INET and AF_INET6 use the TCP constants, AF_UNIX and others do too. The following mapping was used to convert the code: SS_FREE -> TCP_CLOSE SS_UNCONNECTED -> TCP_CLOSE SS_CONNECTING -> TCP_SYN_SENT SS_CONNECTED -> TCP_ESTABLISHED SS_DISCONNECTING -> TCP_CLOSING VSOCK_SS_LISTEN -> TCP_LISTEN In __vsock_create() the sk_state initialization was dropped because sock_init_data() already initializes sk_state to TCP_CLOSE. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
The vsock_diag.ko module will need to check socket table membership. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
The socket table symbols need to be exported from vsock.ko so that the vsock_diag.ko module will be able to traverse sockets. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Just simple overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fix from Rafael Wysocki: "This fixes a code ordering issue in the main suspend-to-idle loop that causes some "low power S0 idle" conditions to be incorrectly reported as unmet with suspend/resume debug messages enabled" * tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / s2idle: Invoke the ->wake() platform callback earlier
-
由 Rafael J. Wysocki 提交于
* pm-sleep: PM / s2idle: Invoke the ->wake() platform callback earlier
-
由 Linus Torvalds 提交于
Merge tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for the alignment of the event number reported at the end of the 'DM_LIST_DEVICES' ioctl. - a couple stable fixes for the DM crypt target. - a DM raid health status reporting fix. * tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix incorrect status output at the end of a "recover" process dm crypt: reject sector_size feature if device length is not aligned to it dm crypt: fix memory leak in crypt_ctr_cipher_old() dm ioctl: fix alignment of event number in the device list
-
由 Jonathan Brassow 提交于
There are three important fields that indicate the overall health and status of an array: dev_health, sync_ratio, and sync_action. They tell us the condition of the devices in the array, and the degree to which the array is synchronized. This commit fixes a condition that is reported incorrectly. When a member of the array is being rebuilt or a new device is added, the "recover" process is used to synchronize it with the rest of the array. When the process is complete, but the sync thread hasn't yet been reaped, it is possible for the state of MD to be: mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ] curr_resync_completed = <max dev size> (but not MaxSector) and all rdevs to be In_sync. This causes the 'array_in_sync' output parameter that is passed to rs_get_progress() to be computed incorrectly and reported as 'false' -- or not in-sync. This in turn causes the dev_health status characters to be reported as all 'a', rather than the proper 'A'. This can cause erroneous output for several seconds at a time when tools will want to be checking the condition due to events that are raised at the end of a sync process. Fix this by properly calculating the 'array_in_sync' return parameter in rs_get_progress(). Also, remove an unnecessary intermediate 'recovery_cp' variable in rs_get_progress(). Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly with stable ones: - X32 ABI fix for PCM; likely not so many people suffer from it, but still better to fix - Two minor kernel warning fixes on USB audio devices spotted by syzkaller - Regression fix of echoaudio due to its inconsistent dimension - Fix for HBR support on Intel DP audio, on some recent chips - USB-audio quirk for yet another Plantronics devices - Fix for potential double-fetch in ASIHPI FIFO queue" * tag 'sound-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usx2y: Suppress kernel warning at page allocation failures Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members" ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor ALSA: pcm: Fix structure definition for X32 ABI ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-M ALSA: hda - program ICT bits to support HBR audio ALSA: asihpi: fix a potential double-fetch bug when copying puhm ALSA: compress: Remove unused variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID subsystem fixes from Jiri Kosina: - buffer management size fix for i2c-hid driver, from Adrian Salido - tool ID regression fixes for Wacom driver from Jason Gerecke - a few small assorted fixes and a few device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: multitouch: Support ALPS PTP stick with pid 0x120A" HID: hidraw: fix power sequence when closing device HID: wacom: Always increment hdev refcount within wacom_get_hdev_data HID: wacom: generic: Clear ABS_MISC when tool leaves proximity HID: wacom: generic: Send MSC_SERIAL and ABS_MISC when leaving prox HID: i2c-hid: allocate hid buffers for real worst case HID: rmi: Make sure the HID device is opened on resume HID: multitouch: Support ALPS PTP stick with pid 0x120A HID: multitouch: support buttons and trackpoint on Lenovo X1 Tab Gen2 HID: wacom: Correct coordinate system of touchring and pen twist HID: wacom: Properly report negative values from Intuos Pro 2 Bluetooth HID: multitouch: Fix system-control buttons not working HID: add multi-input quirk for IDC6680 touchscreen HID: wacom: leds: Don't try to control the EKR's read-only LEDs HID: wacom: bits shifted too much for 9th and 10th buttons
-
- 05 10月, 2017 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Check iwlwifi 9000 reorder buffer out-of-space condition properly, from Sara Sharon. 2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov Kasiviswanathan. 3) Fix session and tunnel release races in l2tp, from Guillaume Nault and Sabrina Dubroca. 4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter. 5) Several mlx5 driver fixes from the Mellanox folks (max flow counters cap check, invalid memory access in IPoIB support, etc.) 6) tun_get_user() should bail if skb->len is zero, from Alexander Potapenko. 7) Fix RCU lookups in inetpeer, from Eric Dumazet. 8) Fix locking in packet_do_bund(). 9) Handle cb->start() error properly in netlink dump code, from Jason A. Donenfeld. 10) Handle multicast properly in UDP socket early demux code. From Paolo Abeni. 11) Several erspan bug fixes in ip_gre, from Xin Long. 12) Fix use-after-free in socket filter code, in order to handle the fact that listener lock is no longer taken during the three-way TCP handshake. From Eric Dumazet. 13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov. 14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: 8021q: skip packets if the vlan is down bpf: fix bpf_tail_call() x64 JIT net: stmmac: dwmac-rk: Add RK3128 GMAC support rndis_host: support Novatel Verizon USB730L net: rtnetlink: fix info leak in RTM_GETSTATS call socket, bpf: fix possible use after free mlxsw: spectrum_router: Track RIF of IPIP next hops mlxsw: spectrum_router: Move VRF refcounting net: hns3: Fix an error handling path in 'hclge_rss_init_hw()' net: mvpp2: Fix clock resource by adding an optional bus clock r8152: add Linksys USB3GIGV1 id l2tp: fix l2tp_eth module loading ip_gre: erspan device should keep dst ip_gre: set tunnel hlen properly in erspan_tunnel_init ip_gre: check packet length and mtu correctly in erspan_xmit ip_gre: get key from session_id correctly in erspan_rcv tipc: use only positive error codes in messages ppp: fix __percpu annotation udp: perform source validation for mcast early demux IPv4: early demux can return an error code ...
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== tools: add bpftool This set adds bpftool to the tools/ directory. The first patch renames tools/net to tools/bpf, the second one adds the new code, while the third adds simple documentation. v4: - rename docs *.txt -> *.rst (Jesper). v3: - address Alexei's comments about output and docs. v2: - report names, map ids, load time, uid; - add docs/man pages; - general cleanups & fixes. ==================== Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Add documentation for bpftool. Separate files for each subcommand. Use rst format. Documentation is compiled into man pages using rst2man. Signed-off-by: NDavid Beckett <david.beckett@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Add a simple tool for querying and updating BPF objects on the system. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
We currently only have BPF tools in the tools/net directory. We are about to add more BPF tools there, not necessarily networking related, rename the directory and related Makefile targets to bpf. Suggested-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
David Ahern says: ==================== net: Plumb extack error reporting to enslavements Another round of extending extack error reporting, this time for enslavements through ndo_add_slave and notifiers. v2 - changed how the messages are added to bonding driver per Jiri's request - fixed spectrum message for LAG overflow per Ido's comment ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
mlxsw fails device enslavement for a number of reasons. Use the extack facility to return an error message to the user stating why the enslave is failing. Messages are prefixed with "spectrum" so users know it is a constraint imposed by the hardware driver. For example: $ ip li add br0.11 link br0 type vlan id 11 $ ip li set swp11 master br0 Error: spectrum: Enslaving a port to a device that already has an upper device is not supported. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Tested-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Pass extack arg to br_add_if. Add messages for a couple of failures and pass arg to netdev_master_upper_dev_link. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
A number of bond_enslave errors are logged using the netdev_err API. Return those messages to userspace via the extack facility. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add netlink_ext_ack to netdev_notifier_info to allow notifier handlers to return errors to userspace. Clean up the initialization in dev.c such that extack is easily added in subsequent patches where relevant. Specifically, remove the init call in call_netdevice_notifiers_info and have callers initalize on stack when info is declared. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vishakha Narvekar 提交于
If the vlan is down, free the packet instead of proceeding with other processing, or counting it as received. If vlan interfaces are used as slaves for bonding, with arp monitoring for connectivity, if the rx counter is seen to be incrementing, then the bond device will not observe that the interface is down. CC: David S. Miller <davem@davemloft.net> Signed-off-by: NVishakha Narvekar <Vishakha.Narvekar@dell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
x-netns interfaces are bound to two netns: the link netns and the upper netns. Usually, this kind of interfaces is created in the link netns and then moved to the upper netns. At the end, the interface is visible only in the upper netns. The link nsid is advertised via netlink in the upper netns, thus the user always knows where is the link part. There is no such mechanism in the link netns. When the interface is moved to another netns, the user cannot "follow" it. This patch adds a new netlink attribute which helps to follow an interface which moves to another netns. When the interface is unregistered, the new nsid is advertised. If the interface is a x-netns interface (ie rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed. CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Our first batch of fixes this release cycle, unfortunately a bit noisier than usual. Two major groups stand out: - Some pinctril dts/dtsi changes for stm32 due to a new driver being merged during the merge window, and this aligns the DT contents between the old format and the new. This could arguably be moved to the next merge window but it also seemed relatively harmless to include now. - Amlogic/meson had driver changes merged that required devicetree changes to avoid functional/performance regressions. I've already asked them to be more careful about this going forward, and making sure drivers are compatible with older DTs when they make these kind of changes. The platform is actively being upstreamed so there's a few things in flight, we've seen this happen before and sometimes it's hard to catch in time. Besides that there is the usual mix of minor fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: dts: stm32: use right pinctrl compatible for stm32f469 ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board ARM: defconfig: update Gemini defconfig ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399 reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST ARM: dts: da850-evm: add serial and ethernet aliases ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry ARM: dts: am33xx: Add spi alias to match SOC schematics ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399 arm64: dt marvell: Fix AP806 system controller size MAINTAINERS: add Macchiatobin maintainers entry ARC: reset: remove the misleading v1 suffix all over ARC: reset: add missing DT binding documentation for HSDKv1 reset driver ARC: reset: Only build on archs that have IOMEM ARM: at91: Replace uses of virt_to_phys with __pa_symbol ...
-
由 James Hogan 提交于
Update my imgtec.com and personal email address to my kernel.org one in a few places as MIPS will soon no longer be part of Imagination Technologies, and add mappings in .mailcap so get_maintainer.pl reports the right address. Signed-off-by: NJames Hogan <jhogan@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Alexei Starovoitov says: ==================== bpf: muli prog support for cgroup-bpf v1->v2: - fixed accidentally swapped two lines which caused static_key not going to zero - addressed Martin's feedback and changed prog_query to be consistent with verifier output: return -enospc and fill supplied buffer instead of just returning -enospc when buffer is too small to fit all prog_ids v1: cgroup-bpf use cases are getting more advanced and running only one program per cgroup is no longer enough. Therefore introduce support for attaching multiple programs per cgroup and running a set of effective programs. These patches introduces BPF_F_ALLOW_MULTI flag for BPF_PROG_ATTACH cmd. The default is still NONE and behavior of BPF_F_ALLOW_OVERRIDE flag is unchanged. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. Most of the logic is in patch 1. Even when cgroup doesn't have any programs attached its set of effective program can be non-empty. To quickly execute them and avoid penalizing cgroups without any effective programs introduce 'struct bpf_prog_array' which has an optimization for cgroups with zero effective programs. Patch 2 introduces BPF_PROG_QUERY command for introspection Patch 3 makes verifier more strict for cgroup-bpf program types. Patch 4+ are tests. More details in individual patches ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
use BPF_PROG_QUERY command to strengthen test coverage Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
add support for BPF_PROG_QUERY command to libbpf Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
tools/include/uapi/linux/bpf.h got out of sync with actual kernel header. Update it. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
create 5 cgroups, attach 6 progs and check that progs are executed as: cgrp1 (MULTI progs A, B) -> cgrp2 (OVERRIDE prog C) -> cgrp3 (MULTI prog D) -> cgrp4 (OVERRIDE prog E) -> cgrp5 (NONE prog F) the event in cgrp5 triggers execution of F,D,A,B in that order. if prog F is detached, the execution is E,D,A,B if prog F and D are detached, the execution is E,A,B if prog F, E and D are detached, the execution is C,A,B Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
introduce bpf_prog_detach2() that takes one more argument prog_fd vs bpf_prog_detach() that takes only attach_fd and type. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
with addition of tnum logic the verifier got smart enough and we can enforce return codes at program load time. For now do so for cgroup-bpf program types. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
introduce BPF_PROG_QUERY command to retrieve a set of either attached programs to given cgroup or a set of effective programs that will execute for events within a cgroup Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NMartin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Compiler does not really know that skb_shinfo(to|from) are constants in skb_try_coalesce(), lets cache their values to shrink code. We might even take care of skb_zcopy() calls later. $ size net/core/skbuff.o.before net/core/skbuff.o text data bss dec hex filename 40727 1298 0 42025 a429 net/core/skbuff.o.before 40631 1298 0 41929 a3c9 net/core/skbuff.o Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
to make sure this is serialized correctly. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
switch the only caller to rtnl_af_unregister. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-