Merge tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung.

Everything but the SPDX identifier updates actually came in earlier
through the MFD merge.

* tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome: chromeos_tbmc - fix SPDX identifier

Pull arch/microblaze updates from Michal Simek:

 - use generic noncoherent direct mapping

 - use LDFLAGS instead of LD

 - pci error path fix

 - remove incorrect comments

* tag 'microblaze-v4.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove stale pcibios_align_resource() comment
  microblaze: delete wrong comment about machine_early_init
  microblaze: add endianness options to LDFLAGS instead of LD
  microblaze: remove consistent_sync and consistent_sync_page
  microblaze: use generic dma_noncoherent_ops
  microblaze: warn if of_iomap() failed

commit 01cf9d52 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
Bridge IP driver")

and

commit ecf677c8 ("PCI: Add a generic weak pcibios_align_resource()")

first patched then removed pcibios_align_resource() from the microblaze
architecture code but failed to remove the comment that was added to
it.

Remove it since it has now become stale and it is quite confusing.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bharat Kumar Gogada <bharatku@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Pull ia64 NO_BOOTMEM conversion from Tony Luck:
 "Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM"

* tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: switch to NO_BOOTMEM
  ia64: use mem_data to detect nodes' minimal and maximal PFNs
  ia64: remove unused num_dma_physpages member from 'struct early_node_data'
  ia64: contig/paging_init: reduce code duplication

Merge tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - add cgroup core selftests

 - fix compile warnings in android ion test

 - fix to bugs in exclude and skip paths in vDSO test

 - remove obsolete config options

 - add missing .gitignore file

* tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Fix kprobe string testcase to not probe notrace function
  selftests: mount: remove no longer needed config option
  selftests: cgroup: add gitignore file
  Add cgroup core selftests
  selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run
  selftests: vDSO - fix to exclude x86 test on non-x86 platforms
  selftests/android: initialize heap_type to avoid compiling warning

Pull tracing updates from Steven Rostedt:

 - Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

 - Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

 - New notrace SRCU API to allow trace events to use SRCU.

 - Addition of mcount-nop option support

 - SPDX headers replacing GPL templates.

 - Various other fixes and clean ups.

 - Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...

Pull ceph updates from Ilya Dryomov:
 "The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...

Pull RTC updates from Alexandre Belloni:
 "It is now possible to add custom sysfs attributes while avoiding a
  possible race condition. Unused code has been removed resulting in a
  nice reduction of the code base. And more drivers have been switched
  to SPDX by their maintainers.

 Summary:

  Subsystem:
   - new helpers to add custom sysfs attributes
   - struct rtc_task removal along with rtc_irq_[un]register()
   - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore

  Drivers:
   - armada38x: reset after rtc power loss
   - ds1307: now supports m41t11
   - isl1208: now supports isl1219 and tamper detection
   - pcf2127: internal SRAM support"

* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
  rtc: ds1307: simplify hwmon config
  rtc: s5m: Add SPDX license identifier
  rtc: maxim: Add SPDX license identifiers
  rtc: isl1219: add device tree documentation
  rtc: isl1208: set ev-evienb bit from device tree
  rtc: isl1208: Add "evdet" interrupt source for isl1219
  rtc: isl1208: add support for isl1219 with tamper detection
  rtc: sysfs: facilitate attribute add to rtc device
  rtc: remove struct rtc_task
  char: rtc: remove task handling
  rtc: pcf85063: preserve control register value between stop and start
  rtc: sh: remove unused variable rtc_dev
  rtc: unexport rtc_irq_set_*
  rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
  rtc: remove irq_task and irq_task_lock
  rtc: remove rtc_irq_register/rtc_irq_unregister
  rtc: sh: remove dead code
  rtc: sa1100: don't set PIE frequency
  rtc: ds1307: support m41t11 variant
  rtc: ds1307: fix data pointer to m41t0
  ...

Pull livepatching updates from Jiri Kosina:
 "Code cleanups from Kamalesh Babulal"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Validate module/old func name length
  livepatch: Remove reliable stacktrace check in klp_try_switch_task()

Pull HID updates from Jiri Kosina:

 - touch_max detection improvements and quirk handling fixes in wacom
   driver from Jason Gerecke and Ping Cheng

 - Palm rejection from Dmitry Torokhov and _dial support from Benjamin
   Tissoires for hid-multitouch driver

 - Low voltage support for i2c-hid driver from Stephen Boyd

 - Guitar-Hero support from Nicolas Adenis-Lamarre

 - other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits)
  HID: intel_ish-hid: tx_buf memory leak on probe/remove
  HID: intel-ish-hid: Prevent loading of driver on Mehlow
  HID: cougar: Add support for the Cougar 500k Gaming Keyboard
  HID: cougar: make compare_device_paths reusable
  HID: intel-ish-hid: remove redundant variable num_frags
  HID: multitouch: handle palm for touchscreens
  HID: multitouch: touchscreens also use confidence reports
  HID: multitouch: report MT_TOOL_PALM for non-confident touches
  HID: microsoft: support the Surface Dial
  HID: core: do not upper bound the collection stack
  HID: input: enable Totem on the Dell Canvas 27
  HID: multitouch: remove one copy of values
  HID: multitouch: ditch mt_report_id
  HID: multitouch: store a per application quirks value
  HID: multitouch: Store per collection multitouch data
  HID: multitouch: make sure the static list of class is not changed
  input: add MT_TOOL_DIAL
  HID: elan: Add support for touchpad on the Toshiba Click Mini L9W
  HID: elan: Add USB-id for HP x2 10-n000nd touchpad
  HID: elan: Add a flag for selecting if the touchpad has a LED
  ...

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Remove unused/obsolete code/comments

  New Functionality:
   - Allow less granular brightness specification for high-res PWMs; pwm_bl
   - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl

  Fix-ups:
   - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl

  Bug Fixes:
   - Fix uninitialised variable; pwm_bl"

* tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix uninitialized variable
  backlight: adp8860: Mark expected switch fall-through
  backlight: Remove obsolete comment for ->state
  dt-bindings: pwm-backlight: Move brightness-levels to optional
  backlight: pwm_bl: Compute brightness of LED linearly to human eye
  dt-bindings: pwm-backlight: Add a num-interpolation-steps property
  backlight: pwm_bl: Linear interpolation between brightness-levels

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...

Pull EDAC fix from Borislav Petkov:
 "An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from
  Takashi Iwai"

* tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]

Various architectures fail to build properly with older versions of the
gcc compiler.

An example from Guenter Roeck in thread [1]:
>
>   In file included from ./include/linux/mm.h:17:0,
>                    from ./include/linux/pid_namespace.h:7,
>                    from ./include/linux/ptrace.h:10,
>                    from arch/openrisc/kernel/asm-offsets.c:32:
>   ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct
>
> This is just an example with gcc 4.5.1 for or32. I have seen the problem
> with gcc 4.4 (for unicore32) as well.

So update the minimum required version of gcc to 4.6.

[1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/

Miscellanea:

 - Update Documentation/process/changes.rst

 - Remove and consolidate version test blocks in compiler-gcc.h for
   versions lower than 4.6
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0bbf47ea ("ia64: use asm-generic/io.h") results in a BUG
while booting ia64.  This is because asm-generic/io.h defines
PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace()
doing a lot of unnecessary (and wrong) things.

I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested
keeping the fix inside the arch/ia64 tree.

Fixes: 0bbf47ea ("ia64: use asm-generic/io.h")
Suggested-by: NArnd Bergman <arnd@arndb.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Guitar-Hero devices support for hid-wiimote

Wacom driver updates:

- touch_max detection improvements
- quirk handling cleanup
- get rid of wacom custom usages

Assorted small driver/core fixes.

devm_* API conversion for hid-sony

Multitouch updates:

- Dial support
- Palm rejection for touchscreens
- a few small assorted fixes

Device-specific fixes for hid-intel-ish

Low voltage support for i2c-hid

Resolution/pressure fixes and new device support for hid-elan

New device support for hid-cougar

Pull m68knommu updates from Greg Ungerer:
 "Only two changes.

  One cleans up warnings in the ColdFire DMA code, the other stubs out
  (with warnings) ColdFire clock api functions not normally used"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Fix typos in Coldfire 5272 DMA debug code
  m68k: coldfire: Normalize clk API

Pull networking fixes from David Miller:

 1) Fix races in IPVS, from Tan Hu.

 2) Missing unbind in matchall classifier, from Hangbin Liu.

 3) Missing act_ife action release, from Vlad Buslov.

 4) Cure lockdep splats in ila, from Cong Wang.

 5) veth queue leak on link delete, from Toshiaki Makita.

 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
    Kees Cook.

 7) RCU usage fixup in XDP, from Tariq Toukan.

 8) Two TCP ULP fixes from Daniel Borkmann.

 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
    Kallweit.

10) Always take tcf_lock with BH disabled, otherwise we can deadlock
    with rate estimator code paths. From Vlad Buslov.

11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
    From Jian-Hong Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ip6_vti: fix creating fallback tunnel device for vti6
  ip_vti: fix a null pointer deferrence when create vti fallback tunnel
  r8169: don't use MSI-X on RTL8106e
  net: lan743x_ptp: convert to ktime_get_clocktai_ts64
  net: sched: always disable bh when taking tcf_lock
  ip6_vti: simplify stats handling in vti6_xmit
  bpf: fix redirect to map under tail calls
  r8169: add missing Kconfig dependency
  tools/bpf: fix bpf selftest test_cgroup_storage failure
  bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
  bpf, sockmap: fix map elem deletion race with smap_stop_sock
  bpf, sockmap: fix leakage of smap_psock_map_entry
  tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
  tcp, ulp: add alias for all ulp modules
  bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
  samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
  net/xdp: Fix suspicious RCU usage warning
  net/mlx5e: Delete unneeded function argument
  Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
  isdn: Disable IIOCDBGVAR
  ...

When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.

Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:

[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941
[ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246
[ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013
[ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980
[ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000
[ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980
[ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000
[ 2742.870473] FS:  00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000
[ 2742.872143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358]  ops_init+0x38/0xf0
[ 2742.876078]  setup_net+0xd9/0x1f0
[ 2742.876789]  copy_net_ns+0xb7/0x130
[ 2742.877538]  create_new_namespaces+0x11a/0x1d0
[ 2742.878525]  unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526]  ksys_unshare+0x1a7/0x330
[ 2742.880313]  __x64_sys_unshare+0xe/0x20
[ 2742.881131]  do_syscall_64+0x5b/0x180
[ 2742.881933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n

Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X.  The chip is RTL8106e - version 39.

[   21.848357] libphy: r8169: probed
[   21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[   22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[  124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

Here is the ethernet controller in detail:

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
	Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at e000 [size=256]
	Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
	Memory at e0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

Falling back to MSI fixes the issue.

Fixes: 6c6aa15f ("r8169: improve interrupt handling")
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64()
for consistency with the other ktime_get_* access functions.

Rename the new caller that has come up as well.

Question: this is the only ptp driver that sets the hardware time
to the current system time in TAI. Why does it do that?
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.

Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:

[  105.470398] ================================
[  105.475014] WARNING: inconsistent lock state
[  105.479628] 4.18.0-rc8+ #664 Not tainted
[  105.483897] --------------------------------
[  105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[  105.509696] {SOFTIRQ-ON-W} state was registered at:
[  105.514925]   _raw_spin_lock+0x2c/0x40
[  105.519022]   tcf_bpf_init+0x579/0x820 [act_bpf]
[  105.523990]   tcf_action_init_1+0x4e4/0x660
[  105.528518]   tcf_action_init+0x1ce/0x2d0
[  105.532880]   tcf_exts_validate+0x1d8/0x200
[  105.537416]   fl_change+0x55a/0x268b [cls_flower]
[  105.542469]   tc_new_tfilter+0x748/0xa20
[  105.546738]   rtnetlink_rcv_msg+0x56a/0x6d0
[  105.551268]   netlink_rcv_skb+0x18d/0x200
[  105.555628]   netlink_unicast+0x2d0/0x370
[  105.559990]   netlink_sendmsg+0x3b9/0x6a0
[  105.564349]   sock_sendmsg+0x6b/0x80
[  105.568271]   ___sys_sendmsg+0x4a1/0x520
[  105.572547]   __sys_sendmsg+0xd7/0x150
[  105.576655]   do_syscall_64+0x72/0x2c0
[  105.580757]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  105.586243] irq event stamp: 489296
[  105.590084] hardirqs last  enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[  105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[  105.609277] softirqs last  enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0
[  105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190
[  105.626813]
               other info that might help us debug this:
[  105.633976]  Possible unsafe locking scenario:

[  105.640526]        CPU0
[  105.643325]        ----
[  105.646125]   lock(&(&p->tcfa_lock)->rlock);
[  105.650747]   <Interrupt>
[  105.653717]     lock(&(&p->tcfa_lock)->rlock);
[  105.658514]
                *** DEADLOCK ***

[  105.665349] 1 lock held by swapper/16/0:
[  105.669629]  #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550
[  105.678200]
               stack backtrace:
[  105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664
[  105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  105.698626] Call Trace:
[  105.701421]  <IRQ>
[  105.703791]  dump_stack+0x92/0xeb
[  105.707461]  print_usage_bug+0x336/0x34c
[  105.711744]  mark_lock+0x7c9/0x980
[  105.715500]  ? print_shortest_lock_dependencies+0x2e0/0x2e0
[  105.721424]  ? check_usage_forwards+0x230/0x230
[  105.726315]  __lock_acquire+0x923/0x26f0
[  105.730597]  ? debug_show_all_locks+0x240/0x240
[  105.735478]  ? mark_lock+0x493/0x980
[  105.739412]  ? check_chain_key+0x140/0x1f0
[  105.743861]  ? __lock_acquire+0x836/0x26f0
[  105.748323]  ? lock_acquire+0x12e/0x290
[  105.752516]  lock_acquire+0x12e/0x290
[  105.756539]  ? est_fetch_counters+0x3c/0xa0
[  105.761084]  _raw_spin_lock+0x2c/0x40
[  105.765099]  ? est_fetch_counters+0x3c/0xa0
[  105.769633]  est_fetch_counters+0x3c/0xa0
[  105.773995]  est_timer+0x87/0x390
[  105.777670]  ? est_fetch_counters+0xa0/0xa0
[  105.782210]  ? lock_acquire+0x12e/0x290
[  105.786410]  call_timer_fn+0x161/0x550
[  105.790512]  ? est_fetch_counters+0xa0/0xa0
[  105.795055]  ? del_timer_sync+0xd0/0xd0
[  105.799249]  ? __lock_is_held+0x93/0x110
[  105.803531]  ? mark_held_locks+0x20/0xe0
[  105.807813]  ? _raw_spin_unlock_irq+0x29/0x40
[  105.812525]  ? est_fetch_counters+0xa0/0xa0
[  105.817069]  ? est_fetch_counters+0xa0/0xa0
[  105.821610]  run_timer_softirq+0x3c4/0x9f0
[  105.826064]  ? lock_acquire+0x12e/0x290
[  105.830257]  ? __bpf_trace_timer_class+0x10/0x10
[  105.835237]  ? __lock_is_held+0x25/0x110
[  105.839517]  __do_softirq+0x11d/0x7bf
[  105.843542]  irq_exit+0x140/0x190
[  105.847208]  smp_apic_timer_interrupt+0xac/0x3b0
[  105.852182]  apic_timer_interrupt+0xf/0x20
[  105.856628]  </IRQ>
[  105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0
[  105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53
[  105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[  105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1
[  105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac
[  105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000
[  105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[  105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b
[  105.929988]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.935232]  do_idle+0x28e/0x320
[  105.938817]  ? arch_cpu_idle_exit+0x40/0x40
[  105.943361]  ? mark_lock+0x8c1/0x980
[  105.947295]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.952619]  cpu_startup_entry+0xc2/0xd0
[  105.956900]  ? cpu_in_idle+0x20/0x20
[  105.960830]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.966146]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.971391]  start_secondary+0x2b5/0x360
[  105.975669]  ? set_cpu_sibling_map+0x1330/0x1330
[  105.980654]  secondary_startup_64+0xa5/0xb0

Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:

[  162.108959]  Possible interrupt unsafe locking scenario:

[  162.116386]        CPU0                    CPU1
[  162.121277]        ----                    ----
[  162.126162]   lock(psample_groups_lock);
[  162.130447]                                local_irq_disable();
[  162.136772]                                lock(&(&p->tcfa_lock)->rlock);
[  162.143957]                                lock(psample_groups_lock);
[  162.150813]   <Interrupt>
[  162.153808]     lock(&(&p->tcfa_lock)->rlock);
[  162.158608]
                *** DEADLOCK ***

In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.

Fixes: 4e232818 ("net: sched: act_mirred: remove dependency on rtnl lock")
Fixes: 764e9a24 ("net: sched: act_vlan: remove dependency on rtnl lock")
Fixes: 729e0126 ("net: sched: act_tunnel_key: remove dependency on rtnl lock")
Fixes: d7728495 ("net: sched: act_sample: remove dependency on rtnl lock")
Fixes: e8917f43 ("net: sched: act_gact: remove dependency on rtnl lock")
Fixes: b6a2b971 ("net: sched: act_csum: remove dependency on rtnl lock")
Fixes: 2142236b ("net: sched: act_bpf: remove dependency on rtnl lock")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull first set of KVM updates from Paolo Bonzini:
 "PPC:
   - minor code cleanups

  x86:
   - PCID emulation and CR3 caching for shadow page tables
   - nested VMX live migration
   - nested VMCS shadowing
   - optimized IPI hypercall
   - some optimizations

  ARM will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
  kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
  KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
  KVM: X86: Implement PV IPIs in linux guest
  KVM: X86: Add kvm hypervisor init time platform setup callback
  KVM: X86: Implement "send IPI" hypercall
  KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
  KVM: x86: Skip pae_root shadow allocation if tdp enabled
  KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
  KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
  KVM: vmx: move struct host_state usage to struct loaded_vmcs
  KVM: vmx: compute need to reload FS/GS/LDT on demand
  KVM: nVMX: remove a misleading comment regarding vmcs02 fields
  KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
  KVM: vmx: add dedicated utility to access guest's kernel_gs_base
  KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
  KVM: vmx: refactor segmentation code in vmx_save_host_state()
  kvm: nVMX: Fix fault priority for VMX operations
  kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
  ...

Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO

Pull UIO fix from Greg KH:
 "Here is a single UIO fix that I forgot to send before 4.18-final came
  out. It reverts a UIO patch that went in the 4.18 development window
  that was causing problems.

  This patch has been in linux-next for a while with no problems, I just
  forgot to send it earlier, or as part of the larger char/misc patch
  series from yesterday, my fault"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "uio: use request_threaded_irq instead"

Pull input updates from Dmitry Torokhov:

 - a new driver for Rohm BU21029 touch controller

 - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free

 - updates to Atmel, eeti. pxrc and iforce drivers

 - assorted driver cleanups and fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  MAINTAINERS: Add PhoenixRC Flight Controller Adapter
  Input: do not use WARN() in input_alloc_absinfo()
  Input: mark expected switch fall-throughs
  Input: raydium_i2c_ts - use true and false for boolean values
  Input: evdev - switch to bitmap API
  Input: gpio-keys - switch to bitmap_zalloc()
  Input: elan_i2c_smbus - cast sizeof to int for comparison
  bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
  md: Avoid namespace collision with bitmap API
  dm: Avoid namespace collision with bitmap API
  Input: pm8941-pwrkey - add resin entry
  Input: pm8941-pwrkey - abstract register offsets and event code
  Input: iforce - reorganize joystick configuration lists
  Input: atmel_mxt_ts - move completion to after config crc is updated
  Input: atmel_mxt_ts - don't report zero pressure from T9
  Input: atmel_mxt_ts - zero terminate config firmware file
  Input: atmel_mxt_ts - refactor config update code to add context struct
  Input: atmel_mxt_ts - config CRC may start at T71
  Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
  Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
  ...

Pull hwspinlock updates from Bjorn Andersson:
 "This introduces devres helpers and an API to request a lock by name,
  then migrates the sprd SPI driver to use these"

* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
  hwspinlock: Fix incorrect return pointers
  spi: sprd: Change to use devm_hwspin_lock_request_specific()
  spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
  hwspinlock: Fix one comment mistake
  hwspinlock: Remove redundant config
  hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
  hwspinlock: Add devm_xxx() APIs to request/free hwlock
  hwspinlock: Add one new API to support getting a specific hwlock by the name

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a few compile and kerneldoc warnings, allows rpmsg devices
  to handle power domains, allow for labeling GLINK edges and supports
  compat for rpmsg_char"

* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
  rpmsg: Add compat ioctl for rpmsg char driver
  rpmsg: glink: Store edge name for glink device
  dt-bindings: soc: qcom: Add label for GLINK bindings
  rpmsg: core: add support to power domains for devices
  rpmsg: smd: fix kerneldoc warnings
  rpmsg: glink: Fix various kerneldoc warnings.
  rpmsg: glink: correctly annotate intent members
  rpmsg: smd: Add missing include of sizes.h

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for pre-start and post-shutdown hooks for remoteproc
  subdevices, refactors the Qualcomm Hexagon support to allow reuse
  between several drivers, makes authentication in the MDT file loader
  optional, migrates a few format strings to use %pK and migrates the
  Davinci driver to use the reset framework"

* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
  remoteproc/davinci: use the reset framework
  remoteproc/davinci: Mark error recovery as disabled
  remoteproc: st_slim: replace "%p" with "%pK"
  remoteproc: replace "%p" with "%pK"
  remoteproc: qcom: fix Q6V5_WCSS dependencies
  remoteproc: Reset table_ptr in rproc_start() failure paths
  remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
  remoteproc: qcom q6v5: fix modular build
  remoteproc: Introduce prepare and unprepare for subdevices
  remoteproc: rename subdev probe and remove functions
  remoteproc: Make client initialize ops in rproc_subdev
  remoteproc: Make start and stop in subdev optional
  remoteproc: Rename subdev functions to start/stop
  remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
  remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
  remoteproc: qcom: adsp: Use common q6v5 helpers
  remoteproc: q6v5: Extract common resource handling
  remoteproc: qcom: mdt_loader: Make the firmware authentication optional

Pull watchdog updates from Wim Van Sebroeck:

 - add MEN 16z069 IP-Core driver

 - renesas-wdt: add support for the R8A77990 wdt

 - stm32_iwdg: Add stm32mp1 support and pclk feature

 - sp805_wdt, orion_wdt, sprd_wdt: several improvements

 - imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt