Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 6月, 2016 4 次提交
    • H
      perf script: Show call graphs when 1st event doesn't have it but some other has · 40f20e50
      由 He Kuang 提交于 
      There's a display inconsistency when there are multiple tracepoint
events, some of which have the 'call-graph' config option set but the
first one hasn't, i.e. the whole logic for call graph processing is
enabled only if the first tracepoint event has call-graph set.

For instance, if we record signal_deliver with call-graph and
signal_generate without:

  $ perf record -g -a -e signal:signal_deliver -e signal:signal_generate/call-graph=no/

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

  kworker/u2:1    13 [000]  6563.875949: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1313 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1313 [000]  6563.877584:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...

Then we exchange the order of these two events in commandline, and keep
signal_generate without call-graph.

  $ perf record -g -a -e signal:signal_generate/call-graph=no/ -e signal:signal_deliver

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

    kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0
            perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000

This time, the callchain of the event signal_deliver disappeared. The
problem is caused by that perf only checks for the first evsel in evlist
and decides if callchain should be printed.

This patch traverses all evsels in evlist to see if any of them have
callchains, and shows the right result:

  $ perf script

  kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463374279-97209-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      40f20e50
    • L
      tools lib api: Respect CROSS_COMPILE for the linker · 703e0165
      由 Lucas Stach 提交于 
      This fixes cross compilation of libapi.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel@pengutronix.de
Cc: patchwork-lst@pengutronix.de
Link: http://lkml.kernel.org/r/1458235670-27341-1-git-send-email-l.stach@pengutronix.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      703e0165
    • W
      perf evlist: Fix alloc_mmap() failure path · 946ae1d4
      由 Wang Nan 提交于 
      If zalloc fail, setting evlist->mmap[i].fd is unsafe and
perf_evlist__alloc_mmap() should bail out right after that.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: d4c6fb36 ("perf evsel: Record fd into perf_mmap")
Link: http://lkml.kernel.org/r/1464699975-230440-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      946ae1d4
    • A
      perf evsel: Provide way to extract integer value from format_field · 90525176
      由 Arnaldo Carvalho de Melo 提交于 
      Out of perf_evsel__intval(), that requires passing the variable name,
that will then be searched in the list of tracepoint variables for the
given evsel.

In cases such as syscall file descriptor ("fd") tracking, this is
wasteful, we need just to use perf_evsel__field() and cache the
format_field.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r6f89jx9j5nkx037d0naviqy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      90525176
  3. 03 6月, 2016 1 次提交
  5. 31 5月, 2016 3 次提交
  7. 30 5月, 2016 8 次提交
  9. 27 5月, 2016 3 次提交
    • W
      perf ctf: Convert invalid chars in a string before set value · 5ea5888b
      由 Wang Nan 提交于 
      We observed some crazy apps on Android set their comm to unprintable
string. For example:

  # cat /proc/10607/task/*/comm
  tencent.qqmusic
  ...
  Binder_2
  日志输出线  <-- Chinese word 'log output thread'
  WifiManager
  ...

'perf data convert' fails to convert perf.data with such string to CTF format.

For example:

  # cat << EOF > ./badguy.c
  #include <sys/prctl.h>
  int main(int argc, char *argv[])
  {
         prctl(PR_SET_NAME, "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf");
         while(1)
                 sleep(1);
         return 0;
  }
  EOF
  # gcc ./badguy.c
  # perf record -e sched:* ./a.out
  # perf data convert --to-ctf ./bad.ctf
  CTF stream 4 flush failed
  [ perf data convert: Converted 'perf.data' into CTF data './bad.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples)  ]
  # babeltrace ./bad.ctf/
  [error] Packet size (18446744073709551615 bits) is larger than remaining file size (262144 bits).
  [error] Stream index creation error.
  [error] Open file stream error.
  [warning] [Context] Cannot open_trace of format ctf at path ./bad.ctf.
  [warning] [Context] cannot open trace "./bad.ctf" from ./bad.ctf/ for reading.
  [error] Cannot open any trace for reading.

  [error] opening trace "./bad.ctf/" for reading.

  [error] none of the specified trace paths could be opened.

This patch converts unprintable characters to hexadecimal word.

After applying this patch the above test works correctly:

  # ~/perf data convert --to-ctf ./good.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './good.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples) ]
  # babeltrace ./good.ctf
  ..
  [23:14:35.491665268] (+0.000001100) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5123, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  [23:14:35.491666230] (+0.000000962) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5122, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  ..

Committer note:

To build perf with libabeltrace, use:

  $ mkdir -p /tmp/build/perf
  $ make LIBBABELTRACE=1 LIBBABELTRACE_DIR=/usr/local O=/tmp/build/perf -C tools/perf install-bin

Or equivalent (no O=, fixup LIBBABELTRACE_DIR, etc).
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464348951-179595-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5ea5888b
    • W
      perf record: Fix crash when kptr is restricted · 3dc6c1d5
      由 Wang Nan 提交于 
      Before this patch, a simple 'perf record' could fail if kptr_restrict is
set to 1 (for normal user) or 2 (for root):

  # perf record ls
  WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
  check /proc/sys/kernel/kptr_restrict.

  Samples in kernel functions may not be resolved if a suitable vmlinux
  file is not found in the buildid cache or in the vmlinux path.

  Samples in kernel modules won't be resolved at all.

  If some relocation was applied (e.g. kexec) symbols may be misresolved
  even with a suitable vmlinux or kallsyms file.

  Segmentation fault (core dumped)

This patch skips perf_event__synthesize_kernel_mmap() when kptr is not
available.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 45e90056 ("perf machine: Do not bail out if not managing to read ref reloc symbol")
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3dc6c1d5
    • W
      perf symbols: Check kptr_restrict for root · 38272dc4
      由 Wang Nan 提交于 
      If kptr_restrict is set to 2, even root is not allowed to see pointers.
This patch checks kptr_restrict even if euid == 0. For root, report
error if kptr_restrict is 2.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      38272dc4
  11. 24 5月, 2016 6 次提交
  13. 23 5月, 2016 1 次提交
    • A
      perf report: Add srcline_from/to branch sort keys · 508be0df
      由 Andi Kleen 提交于 
      Add "srcline_from" and "srcline_to" branch sort keys that allow to show
the source lines of a branch.

That makes it much easier to track down where particular branches happen
in the program, for example to examine branch mispredictions, or to
associate it with cycle counts:

  % perf record -b -e cycles:p ./tcall
  % perf report --sort srcline_from,srcline_to,mispredict
  ...
    15.10%  tcall.c:18       tcall.c:10       N
    14.83%  tcall.c:11       tcall.c:5        N
    14.12%  tcall.c:7        tcall.c:12       N
    14.04%  tcall.c:12       tcall.c:5        N
    12.42%  tcall.c:17       tcall.c:18       N
    12.39%  tcall.c:7        tcall.c:13       N
    12.27%  tcall.c:13       tcall.c:17       N
  ...

  % perf report --sort srcline_from,srcline_to,cycles
  ...
    17.12%  tcall.c:18       tcall.c:11       1
    17.01%  tcall.c:12       tcall.c:6        1
    16.98%  tcall.c:11       tcall.c:6        1
    15.91%  tcall.c:17       tcall.c:18       1
     6.38%  tcall.c:7        tcall.c:17       7
     4.80%  tcall.c:7        tcall.c:12       8
     4.21%  tcall.c:7        tcall.c:17       8
     2.67%  tcall.c:7        tcall.c:12       7
     2.62%  tcall.c:7        tcall.c:12       10
     2.10%  tcall.c:7        tcall.c:17       9
     1.58%  tcall.c:7        tcall.c:12       6
     1.44%  tcall.c:7        tcall.c:12       5
     1.38%  tcall.c:7        tcall.c:12       9
     1.06%  tcall.c:7        tcall.c:17       13
     1.05%  tcall.c:7        tcall.c:12       4
     1.01%  tcall.c:7        tcall.c:17       6

Open issues:

- Some kernel symbols get misresolved.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1463775308-32748-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      508be0df
  15. 21 5月, 2016 2 次提交
  17. 20 5月, 2016 10 次提交
  19. 17 5月, 2016 2 次提交