Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 24 9月, 2021 2 次提交
  3. 23 9月, 2021 3 次提交
  5. 22 9月, 2021 1 次提交
  7. 19 9月, 2021 4 次提交
    • J
      net: sched: move and reuse mq_change_real_num_tx() · f7116fb4
      由 Jakub Kicinski 提交于 
      The code for handling active queue changes is identical
between mq and mqprio, reuse it.
Suggested-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7116fb4
    • V
      net: dsa: tear down devlink port regions when tearing down the devlink port on error · fd292c18
      由 Vladimir Oltean 提交于 
      Commit 86f8b1c0 ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.

Commit fb6ec87f ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.

Commit 08156ba4 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.

When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:

devlink_port_unregister:
	WARN_ON(!list_empty(&devlink_port->region_list));

So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.

Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.

But DSA's layering stays in our way quite badly here.

The options I've considered are:

1. Introduce a function in devlink to just change a port's type and
   flavour. No dice, devlink keeps a lot of state, it really wants the
   port to not be registered when you set its parameters, so changing
   anything can only be done by destroying what we currently have and
   recreating it.

2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
   and the region returned, keep those in a list, then when the devlink
   port unregister needs to take place, the existing devlink regions are
   destroyed by DSA, and we replay the creation of new regions using the
   cached parameters. Problem: mv88e6xxx keeps the region pointers in
   chip->ports[port].region, and these will remain stale after DSA frees
   them. There are many things DSA can do, but updating mv88e6xxx's
   private pointers is not one of them.

3. Just let the driver do it (i.e. introduce a very specific method
   called ds->ops->port_reinit_as_unused, which unregisters its devlink
   port devlink regions, then the old devlink port, then registers the
   new one, then the devlink port regions for it). While it does work,
   as opposed to the others, it's pretty horrible from an API
   perspective and we can do better.

4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
   which in the case of mv88e6xxx must register and unregister the
   devlink port regions. Call these 2 methods when the port must be
   reinitialized as unused.

Naturally, I went for the 4th approach.

Fixes: 08156ba4 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fd292c18
    • T
      net: core: Correct the sock::sk_lock.owned lockdep annotations · 2dcb96ba
      由 Thomas Gleixner 提交于 
      lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.

sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.

lock_sock_nested() is a straight forward 'mutex' lock operation:

  might_sleep();
  spin_lock_bh(sock::sk_lock.slock)
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }

The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:

  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();

The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.

But that's from the lockdep perspective still the wrong place:

 1) The mutex_acquire() is issued _after_ the successful acquisition which
    is pointless because in a dead lock scenario this point is never
    reached which means that if the deadlock is the first instance of
    exposing the wrong lock order lockdep does not have a chance to detect
    it.

 2) It only works because lockdep is rather lax on the context from which
    the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
    and therefore non-preemptible region is obviously invalid, except for a
    trylock which is clearly not the case here.

    This 'works' stops working on RT enabled kernels where the bottom halves
    serialization is done via a local lock, which exposes this misplacement
    because the 'mutex' and the local lock nest the wrong way around and
    lockdep complains rightfully about a lock inversion.

The placement is wrong since the initial commit a5b5bb9a ("[PATCH]
lockdep: annotate sk_locks") which introduced this.

Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.

lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:

  spin_lock_bh(sock::sk_lock.slock)
  if (!sock::sk_lock.owned)
      return false;
  while (!try_lock(sock::sk_lock.owned)) {
      spin_unlock_bh(sock::sk_lock.slock);
      wait_for_release();
      spin_lock_bh(sock::sk_lock.slock);
  }
  spin_unlock(sock::sk_lock.slock);
  mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
  local_bh_enable();
  return true;

But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.

In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().

Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.

As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.

The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.

Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.
Reported-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2dcb96ba
    • V
      net: dsa: be compatible with masters which unregister on shutdown · 0650bf52
      由 Vladimir Oltean 提交于 
      Lino reports that on his system with bcmgenet as DSA master and KSZ9897
as a switch, rebooting or shutting down never works properly.

What does the bcmgenet driver have special to trigger this, that other
DSA masters do not? It has an implementation of ->shutdown which simply
calls its ->remove implementation. Otherwise said, it unregisters its
network interface on shutdown.

This message can be seen in a loop, and it hangs the reboot process there:

unregister_netdevice: waiting for eth0 to become free. Usage count = 3

So why 3?

A usage count of 1 is normal for a registered network interface, and any
virtual interface which links itself as an upper of that will increment
it via dev_hold. In the case of DSA, this is the call path:

dsa_slave_create
-> netdev_upper_dev_link
   -> __netdev_upper_dev_link
      -> __netdev_adjacent_dev_insert
         -> dev_hold

So a DSA switch with 3 interfaces will result in a usage count elevated
by two, and netdev_wait_allrefs will wait until they have gone away.

Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and
delete themselves, but DSA cannot just vanish and go poof, at most it
can unbind itself from the switch devices, but that must happen strictly
earlier compared to when the DSA master unregisters its net_device, so
reacting on the NETDEV_UNREGISTER event is way too late.

It seems that it is a pretty established pattern to have a driver's
->shutdown hook redirect to its ->remove hook, so the same code is
executed regardless of whether the driver is unbound from the device, or
the system is just shutting down. As Florian puts it, it is quite a big
hammer for bcmgenet to unregister its net_device during shutdown, but
having a common code path with the driver unbind helps ensure it is well
tested.

So DSA, for better or for worse, has to live with that and engage in an
arms race of implementing the ->shutdown hook too, from all individual
drivers, and do something sane when paired with masters that unregister
their net_device there. The only sane thing to do, of course, is to
unlink from the master.

However, complications arise really quickly.

The pattern of redirecting ->shutdown to ->remove is not unique to
bcmgenet or even to net_device drivers. In fact, SPI controllers do it
too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers
and MDIO controllers do it too (this is something I have not researched
too deeply, but even if this is not the case today, it is certainly
plausible to happen in the future, and must be taken into consideration).

Since DSA switches might be SPI devices, I2C devices, MDIO devices, the
insane implication is that for the exact same DSA switch device, we
might have both ->shutdown and ->remove getting called.

So we need to do something with that insane environment. The pattern
I've come up with is "if this, then not that", so if either ->shutdown
or ->remove gets called, we set the device's drvdata to NULL, and in the
other hook, we check whether the drvdata is NULL and just do nothing.
This is probably not necessary for platform devices, just for devices on
buses, but I would really insist for consistency among drivers, because
when code is copy-pasted, it is not always copy-pasted from the best
sources.

So depending on whether the DSA switch's ->remove or ->shutdown will get
called first, we cannot really guarantee even for the same driver if
rebooting will result in the same code path on all platforms. But
nonetheless, we need to do something minimally reasonable on ->shutdown
too to fix the bug. Of course, the ->remove will do more (a full
teardown of the tree, with all data structures freed, and this is why
the bug was not caught for so long). The new ->shutdown method is kept
separate from dsa_unregister_switch not because we couldn't have
unregistered the switch, but simply in the interest of doing something
quick and to the point.

The big question is: does the DSA switch's ->shutdown get called earlier
than the DSA master's ->shutdown? If not, there is still a risk that we
might still trigger the WARN_ON in unregister_netdevice that says we are
attempting to unregister a net_device which has uppers. That's no good.
Although the reference to the master net_device won't physically go away
even if DSA's ->shutdown comes afterwards, remember we have a dev_hold
on it.

The answer to that question lies in this comment above device_link_add:

 * A side effect of the link creation is re-ordering of dpm_list and the
 * devices_kset list by moving the consumer device and all devices depending
 * on it to the ends of these lists (that does not happen to devices that have
 * not been registered when this function is called).

so the fact that DSA uses device_link_add towards its master is not
exactly for nothing. device_shutdown() walks devices_kset from the back,
so this is our guarantee that DSA's shutdown happens before the master's
shutdown.

Fixes: 2f1e8ea7 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/Reported-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0650bf52
  9. 18 9月, 2021 1 次提交
  11. 17 9月, 2021 1 次提交
  13. 16 9月, 2021 1 次提交
    • V
      net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports · a57d8c21
      由 Vladimir Oltean 提交于 
      Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error
messages appear:

mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2
mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2

(and similarly for other ports)

What happens is that DSA has a policy "even if there are bugs, let's at
least not leak memory" and dsa_port_teardown() clears the dp->fdbs and
dp->mdbs lists, which are supposed to be empty.

But deleting that cleanup code, the warnings go away.

=> the FDB and MDB lists (used for refcounting on shared ports, aka CPU
and DSA ports) will eventually be empty, but are not empty by the time
we tear down those ports. Aka we are deleting them too soon.

The addresses that DSA complains about are host-trapped addresses: the
local addresses of the ports, and the MAC address of the bridge device.

The problem is that offloading those entries happens from a deferred
work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this
races with the teardown of the CPU and DSA ports where the refcounting
is kept.

In fact, not only it races, but fundamentally speaking, if we iterate
through the port list linearly, we might end up tearing down the shared
ports even before we delete a DSA user port which has a bridge upper.

So as it turns out, we need to first tear down the user ports (and the
unused ones, for no better place of doing that), then the shared ports
(the CPU and DSA ports). In between, we need to ensure that all work
items scheduled by our switchdev handlers (which only run for user
ports, hence the reason why we tear them down first) have finished.

Fixes: 161ca59d ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      a57d8c21
  15. 15 9月, 2021 2 次提交
  17. 02 9月, 2021 1 次提交
    • T
      flow: fix object-size-mismatch warning in flowi{4,6}_to_flowi_common() · b9edbfe1
      由 Tetsuo Handa 提交于 
      Commit 3df98d79 ("lsm,selinux: pass flowi_common instead of flowi
to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which
cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04.

 ================================================================================
 UBSAN: object-size-mismatch in ./include/net/flow.h:197:33
 member access within address ffffc9000109fbd8 with insufficient space
 for an object of type 'struct flowi'
 CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
 Call Trace:
  dump_stack_lvl+0x103/0x171
  ubsan_type_mismatch_common+0x1de/0x390
  __ubsan_handle_type_mismatch_v1+0x41/0x50
  udp_sendmsg+0xda2/0x1300
  ? ip_skb_dst_mtu+0x1f0/0x1f0
  ? sock_rps_record_flow+0xe/0x200
  ? inet_send_prepare+0x2d/0x90
  sock_sendmsg+0x49/0x80
  ____sys_sendmsg+0x269/0x370
  __sys_sendmsg+0x15e/0x1d0
  ? syscall_enter_from_user_mode+0xf0/0x1b0
  do_syscall_64+0x3d/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f7081a50497
 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
 RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497
 RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c
 RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28
 R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c
 R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c
 ================================================================================

I don't think we need to call flowi{4,6}_to_flowi() from these functions
because the first member of "struct flowi4" and "struct flowi6" is

  struct flowi_common __fl_common;

while the first member of "struct flowi" is

  union {
    struct flowi_common __fl_common;
    struct flowi4       ip4;
    struct flowi6       ip6;
    struct flowidn      dn;
  } u;

which should point to the same address without access to "struct flowi".
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b9edbfe1
  19. 31 8月, 2021 1 次提交
    • M
      sch_htb: Fix inconsistency when leaf qdisc creation fails · ca49bfd9
      由 Maxim Mikityanskiy 提交于 
      In HTB offload mode, qdiscs of leaf classes are grafted to netdev
queues. sch_htb expects the dev_queue field of these qdiscs to point to
the corresponding queues. However, qdisc creation may fail, and in that
case noop_qdisc is used instead. Its dev_queue doesn't point to the
right queue, so sch_htb can lose track of used netdev queues, which will
cause internal inconsistencies.

This commit fixes this bug by keeping track of the netdev queue inside
struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the
new field, the two values are synced on writes, and WARNs are added to
assert equality of the two values.

The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue,
the driver used to pass the old and new queue IDs to sch_htb. Now that
there is a new field (offload_queue) in struct htb_class that needs to
be updated on this operation, the driver will pass the old class ID to
sch_htb instead (it already knows the new class ID).

Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      ca49bfd9
  21. 30 8月, 2021 1 次提交
  23. 28 8月, 2021 1 次提交
    • R
      ipv6: add IFLA_INET6_RA_MTU to expose mtu value · 49b99da2
      由 Rocco Yue 提交于 
      The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:

(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.

Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.

After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.

In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: NRocco Yue <rocco.yue@mediatek.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      49b99da2
  25. 26 8月, 2021 1 次提交
  27. 25 8月, 2021 6 次提交
  29. 24 8月, 2021 3 次提交
    • Z
      ipv6: correct comments about fib6_node sernum · 446e7f21
      由 zhang kai 提交于 
      correct comments in set and get fn_sernum
Signed-off-by: Nzhang kai <zhangkaiheb@126.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      446e7f21
    • V
      net: dsa: let drivers state that they need VLAN filtering while standalone · 58adf9dc
      由 Vladimir Oltean 提交于 
      As explained in commit e358bef7 ("net: dsa: Give drivers the chance
to veto certain upper devices"), the hellcreek driver uses some tricks
to comply with the network stack expectations: it enforces port
separation in standalone mode using VLANs. For untagged traffic,
bridging between ports is prevented by using different PVIDs, and for
VLAN-tagged traffic, it never accepts 8021q uppers with the same VID on
two ports, so packets with one VLAN cannot leak from one port to another.

That is almost fine*, and has worked because hellcreek relied on an
implicit behavior of the DSA core that was changed by the previous
patch: the standalone ports declare the 'rx-vlan-filter' feature as 'on
[fixed]'. Since most of the DSA drivers are actually VLAN-unaware in
standalone mode, that feature was actually incorrectly reflecting the
hardware/driver state, so there was a desire to fix it. This leaves the
hellcreek driver in a situation where it has to explicitly request this
behavior from the DSA framework.

We configure the ports as follows:

- Standalone: 'rx-vlan-filter' is on. An 8021q upper on top of a
  standalone hellcreek port will go through dsa_slave_vlan_rx_add_vid
  and will add a VLAN to the hardware tables, giving the driver the
  opportunity to refuse it through .port_prechangeupper.

- Bridged with vlan_filtering=0: 'rx-vlan-filter' is off. An 8021q upper
  on top of a bridged hellcreek port will not go through
  dsa_slave_vlan_rx_add_vid, because there will not be any attempt to
  offload this VLAN. The driver already disables VLAN awareness, so that
  upper should receive the traffic it needs.

- Bridged with vlan_filtering=1: 'rx-vlan-filter' is on. An 8021q upper
  on top of a bridged hellcreek port will call dsa_slave_vlan_rx_add_vid,
  and can again be vetoed through .port_prechangeupper.

*It is not actually completely fine, because if I follow through
correctly, we can have the following situation:

ip link add br0 type bridge vlan_filtering 0
ip link set lan0 master br0 # lan0 now becomes VLAN-unaware
ip link set lan0 nomaster # lan0 fails to become VLAN-aware again, therefore breaking isolation

This patch fixes that corner case by extending the DSA core logic, based
on this requested attribute, to change the VLAN awareness state of the
switch (port) when it leaves the bridge.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      58adf9dc
    • L
      mac80211: introduce individual TWT support in AP mode · f5a4c24e
      由 Lorenzo Bianconi 提交于 
      Introduce TWT action frames parsing support to mac80211.
Currently just individual TWT agreement are support in AP mode.
Whenever the AP receives a TWT action frame from an associated client,
after performing sanity checks, it will notify the underlay driver with
requested parameters in order to check if they are supported and if there
is enough room for a new agreement. The driver is expected to set the
agreement result and report it to mac80211.

Drivers supporting this have two new callbacks:
 - add_twt_setup (mandatory)
 - twt_teardown_request (optional)

mac80211 will send an action frame reply according to the result
reported by the driver.
Tested-by: NPeter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org
[use le16p_replace_bits(), minor cleanups, use (void *) casts,
 fix to use ieee80211_get_he_iftype_cap() correctly]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
      f5a4c24e
  31. 23 8月, 2021 1 次提交
    • V
      net: dsa: track unique bridge numbers across all DSA switch trees · f5e165e7
      由 Vladimir Oltean 提交于 
      Right now, cross-tree bridging setups work somewhat by mistake.

In the case of cross-tree bridging with sja1105, all switch instances
need to agree upon a common VLAN ID for forwarding a packet that belongs
to a certain bridging domain.

With TX forwarding offload, the VLAN ID is the bridge VLAN for
VLAN-aware bridging, and the tag_8021q TX forwarding offload VID
(a VLAN which has non-zero VBID bits) for VLAN-unaware bridging.

The VBID for VLAN-unaware bridging is derived from the dp->bridge_num
value calculated by DSA independently for each switch tree.

If ports from one tree join one bridge, and ports from another tree join
another bridge, DSA will assign them the same bridge_num, even though
the bridges are different. If cross-tree bridging is supported, this
is an issue.

Modify DSA to calculate the bridge_num globally across all switch trees.
This has the implication for a driver that the dp->bridge_num value that
DSA will assign to its ports might not be contiguous, if there are
boards with multiple DSA drivers instantiated. Additionally, all
bridge_num values eat up towards each switch's
ds->num_fwd_offloading_bridges maximum, which is potentially unfortunate,
and can be seen as a limitation introduced by this patch. However, that
is the lesser evil for now.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f5e165e7
  33. 20 8月, 2021 1 次提交
  35. 19 8月, 2021 1 次提交
  37. 18 8月, 2021 1 次提交
  39. 17 8月, 2021 3 次提交
  41. 16 8月, 2021 1 次提交
  43. 14 8月, 2021 3 次提交