Relocate chunks which have at least one stripe located on a device with
devid X.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks that are less than X percent full.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks based on a given profile mask.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This allows to have a separate set of filters for each chunk type
(data,meta,sys).  The code however is generic and switch on chunk type
is only done once.

This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc.  The semantics of the old balancing
ioctl are fully preserved.

Explicitly disallow any volume operations when balance is in progress.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Chunk's type and profile are encoded in u64 flags field.  Introduce
masks to easily access them.  Also fix the type of BTRFS_BLOCK_GROUP_*
constants, it should be ULL.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

{data,metadata,system}_alloc_profile fields have been unused for a long
time now.  Get rid of them.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The btrfs io submission threads can build up massive plug lists.  This
keeps things more reasonable so we don't hand over huge dumps of IO at
once.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_end_bio checks the number of errors on a bio against the max
number of errors allowed before sending any EIOs up to the higher
levels.

If we got enough copies of the bio done for a given raid level, it is
supposed to clear the bio error flag and return success.

We have pointers to the original bio sent down by the higher layers and
pointers to any cloned bios we made for raid purposes.  If the original
bio happens to be the one that got an io error, but not the last one to
finish, it might not have the BIO_UPTODATE bit set.

Then, when the last bio does finish, we'll call bio_end_io on the
original bio.  It won't have the uptodate bit set and we'll end up
sending EIO to the higher layers.

We already had a check for this, it just was conditional on getting the
IO error on the very last bio.  Make the check unconditional so we eat
the EIOs properly.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If we call ioctl(BTRFS_IOC_ADD_DEV) directly, we'll succeed in adding
a readonly device to a btrfs filesystem, and btrfs will write to
that device, emitting kernel errors:

[ 3109.833692] lost page write due to I/O error on loop2
[ 3109.833720] lost page write due to I/O error on loop2
...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_previous_item() just search the b+ tree, do not COW the nodes or leaves,
if we modify the result of it, the meta-data will be broken. fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

fs_info has now ~9kb, more than fits into one page. This will cause
mount failure when memory is too fragmented. Top space consumers are
super block structures super_copy and super_for_commit, ~2.8kb each.
Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64)

Add a wrapper for freeing fs_info and all of it's dynamically allocated
members.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Fix a bug introduced by 20b45077.  We have to return EINVAL on mount
failure, but doing that too early in the sequence leaves all of the
devices opened exclusively.  This also fixes an issue where under some
scenarios only a second mount -o degraded <devices> command would
succeed.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

One of the things that kills us is the fact that our ENOSPC reservations are
horribly over the top in most normal cases.  There isn't too much that can be
done about this because when we are completely full we really need them to work
like this so we don't under reserve.  However if there is plenty of unallocated
chunks on the disk we can use that to gauge how much we can overcommit.  So this
patch adds chunk free space accounting so we always know how much unallocated
space we have.  Then if we fail to make a reservation within our allocated
space, check to see if we can overcommit.  In the normal flushing case (like
with delalloc metadata reservations) we'll take the free space and divide it by
2 if our metadata profile is setup for DUP or any of those, and then divide it
by 8 to make sure we don't overcommit too much.  Then if we're in a non-flushing
case (we really need this reservation now!) we only limit ourselves to half of
the free space.  This makes this fio test

[torrent]
filename=torrent-test
rw=randwrite
size=4g
ioengine=sync
directory=/mnt/btrfs-test

go from taking around 45 minutes to 10 seconds on my freshly formatted 3 TiB
file system.  This doesn't seem to break my other enospc tests, but could really
use some more testing as this is a super scary change.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Add state information for readahead to btrfs_fs_info and btrfs_device

Changes v2:
 - don't wait in radix_trees
 - add own set of workers for readahead
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NArne Jansen <sensille@gmx.net>

The error correction code wants to make sure that only the bad mirror is
rewritten. Thus, we need to know which mirror is the bad one. I did not
find a more apropriate field than bi_bdev. But I think using this is fine,
because it is modified by the block layer, anyway, and should not be read
after the bio returned.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

btrfs_bio is a bio abstraction able to split and not complete after the last
bio has returned (like the old btrfs_multi_bio). Additionally, btrfs_bio
tracks the mirror_num used to read data which can be used for error
correction purposes.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

sync_pending is uninitialized before it be used, fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When balancing, we'll first try to shrink devices for some space,
but if it is working on a full multi-disk partition with raid protection,
we may encounter a bug, that is, while shrinking, total_bytes may be less
than bytes_used, and btrfs may allocate a dev extent that accesses out of
device's bounds.

Then we will not be able to write or read the data which stores at the end
of the device, and get the followings:

device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5
Btrfs detected SSD devices, enabling SSD mode
btrfs: relocating block group 476315648 flags 9
btrfs: found 4 extents
attempt to access beyond end of device
sdb5: rw=145, want=546176, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546304, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546432, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546560, limit=546147
attempt to access beyond end of device
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We have a problem where if a user specifies discard but doesn't actually support
it we will return EOPNOTSUPP from btrfs_discard_extent.  This is a problem
because this gets called (in a fashion) from the tree log recovery code, which
has a nice little BUG_ON(ret) after it, which causes us to fail the tree log
replay.  So instead detect wether our devices support discard when we're adding
them and then don't issue discards if we know that the device doesn't support
it.  And just for good measure set ret = 0 in btrfs_issue_discard just in case
we still get EOPNOTSUPP so we don't screw anybody up like this again.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs does bio submissions from a worker thread, and each device
has a list of high priority bios and regular priority bios.

Synchronous writes go to the high priority thread while async writes
go to regular list.  This commit brings back an explicit unplug
any time we switch from high to regular priority, which makes it
easier for the block layer to give us low latencies.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch was originally from Tejun Heo.  lockdep complains about the btrfs
locking because we sometimes take btree locks from two different trees at the
same time.  The current classes are based only on level in the btree, which
isn't enough information for lockdep to figure out if the lock is safe.

This patch makes a class for each type of tree, and lumps all the FS trees that
actually have files and directories into the same class.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I also removed the BUG_ON from error return of find_next_chunk in
init_first_rw_device(). It turns out that the only caller of
init_first_rw_device() also BUGS on any nonzero return so no actual behavior
change has occurred here.

do_chunk_alloc() also needed an update since it calls btrfs_alloc_chunk()
which can now return -ENOMEM. Instead of setting space_info->full on any
error from btrfs_alloc_chunk() I catch and return every error value _except_
-ENOSPC. Thanks goes to Tsutomu Itoh for pointing that issue out.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Dealing with this seems trivial - the only caller of btrfs_balance() is
btrfs_ioctl() which passes the error code directly back to userspace. There
also isn't much state to unwind (if I'm wrong about this point, we can
always safely move the allocation to the top of btrfs_balance() anyway).
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

A user reported an error where if we try to balance an fs after a device has
been removed it will blow up.  This is because we get an EIO back and this is
where BUG_ON(ret) bites us in the ass.  To fix we just exit.  Thanks,
Reported-by: NAnand Jain <Anand.Jain@oracle.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Get rid of FIXME comment.  Uuids from dmesg are now the same as uuids
given by btrfs-progs.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In degraded mode the struct btrfs_device of missing devs don't have
device->name set. A kstrdup of NULL correctly returns NULL. Don't
BUG in this case.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

fs_devices->devices is only updated on remove and add device paths, so we can
use rcu to protect it in the reader side
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Drop device_list_mutex for the reader side  on clone_fs_devices and
btrfs_rm_device pathes since the fs_info->volume_mutex can ensure the device
list is not updated

btrfs_close_extra_devices is the initialized path, we can not add or remove
device at this time, so we can simply drop the mutex safely, like other
initialized function does(add_missing_dev, __find_device, __btrfs_open_devices
...).
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

On remove device path, it updates device->dev_alloc_list but does not hold
chunk lock
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

On btrfs_congested_fn and __unplug_io_fn paths, we should hold
device_list_mutex to avoid remove/add device path to
update fs_devices->devices

On __btrfs_close_devices and btrfs_prepare_sprout paths, the devices in
fs_devices->devices or fs_devices->devices is updated, so we should hold
the mutex to avoid the reader side to reach them
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

'bh' is forgot to release if no error is detected
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The error code is returned instead of calling BUG_ON when
btrfs_del_item returns the error.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The error code is returned instead of calling BUG_ON when
btrfs_previous_item returns the error.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In a multi device setup, the chunk allocator currently always allocates
chunks on the devices in the same order. This leads to a very uneven
distribution, especially with RAID1 or RAID10 and an uneven number of
devices.
This patch always sorts the devices before allocating, and allocates the
stripes on the devices with the most available space, as long as there
is enough space available. In a low space situation, it first tries to
maximize striping.
The patch also simplifies the allocator and reduces the checks for
corner cases.
The simplification is done by several means. First, it defines the
properties of each RAID type upfront. These properties are used afterwards
instead of differentiating cases in several places.
Second, the old allocator defined a minimum stripe size for each block
group type, tried to find a large enough chunk, and if this fails just
allocates a smaller one. This is now done in one step. The largest possible
chunk (up to max_chunk_size) is searched and allocated.
Because we now have only one pass, the allocation of the map (struct
map_lookup) is moved down to the point where the number of stripes is
already known. This way we avoid reallocation of the map.
We still avoid allocating stripes that are not a multiple of STRIPE_SIZE.

currently alloc_start is disregarded if the requested
chunk size is bigger than (device size - alloc_start),
but smaller than the device size.
The only situation where I see this could have made sense
was when a chunk equal the size of the device has been
requested. This was possible as the allocator failed to
take alloc_start into account when calculating the request
chunk size. As this gets fixed by this patch, the workaround
is not necessary anymore.

this function won't be used here anymore, so move it super.c where it is
used for df-calculation

This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.

This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.
Signed-off-by: NArne Jansen <sensille@gmx.net>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

parameter tree root it's not used since commit
5f39d397 ("Btrfs: Create extent_buffer
interface for large blocksizes")
Signed-off-by: NDavid Sterba <dsterba@suse.cz>