- 21 12月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add variant data structures for Exynos4212 and Exynos4412 SoC. Add 'const' qualifier for the variant description structures. Also remove has_cam_if flags from FIMC3 on Exynos4210 SoC is it has no interconnections the camera ports. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 11月, 2012 2 次提交
-
-
由 Sylwester Nawrocki 提交于
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this caused driver resources not to be released. Not releasing the buffer queue also prevented other drivers to free memory, e.g. in MMAP -> USERPTR scenario. This patch is required for stable kernels v3.6+. Reported-by: NKamil Debski <k.debski@samsung.com> Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Make sure when fimc and fimc-lite capture video node is registered it has valid pipeline_ops assigned to it. Otherwise when a video node is opened right after is was registered there, might be an attempt to use ops that are just being assigned, after function v4l2_device_register_subdev() returns. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 11月, 2012 2 次提交
-
-
由 Tomasz Stanislawski 提交于
This patch enhances s5p-fimc with support for DMABUF exporting via VIDIOC_EXPBUF ioctl. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tomasz Stanislawski 提交于
This patch enhances s5p-fimc with support for DMABUF importing via V4L2_MEMORY_DMABUF memory type. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 10月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add missing checks for return value of vb2_queue_init(), after this function has been modified recently to not throw BUG_ON(). This eliminates related compiler warnings, drivers/media/platform/s5p-fimc/fimc-lite.c: In function fimc_lite_subdev_registered: drivers/media/platform/s5p-fimc/fimc-lite.c:1256:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] drivers/media/platform/s5p-fimc/fimc-capture.c: In function fimc_register_capture_device: drivers/media/platform/s5p-fimc/fimc-capture.c:1739:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 10月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
The V4L2_PIX_FMT_S5C_YUYV_JPG image formats consists of 2 planes, the first containing interleaved JPEG/YUYV data and the second containing meta data describing the interleaving method. The image data is transferred with MIPI-CSI "User Defined Byte-Based Data 1" type and is captured to memory by FIMC DMA engine. The meta data is transferred using MIPI-CSI2 "Embedded 8-bit non Image Data" and it is captured in the MIPI-CSI slave device and copied to the bridge provided buffer. To make sure the size of allocated buffers is correct for the subdevs configuration when VIDIOC_STREAMON ioctl is invoked, an additional check is added at the video pipeline validation function. Flag FMT_FLAGS_COMPRESSED indicates the buffer size must be retrieved from a sensor subdev. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 10月, 2012 6 次提交
-
-
由 Sylwester Nawrocki 提交于
Use a copy of sensor platform data structure, rather than referencing external platform data from the driver. This allows to fill the local copy with values parsed from device tree when needed. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
Silences the following warning: WARNING: sizeof *ctx should be sizeof(*ctx) Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
There is no need to to dynamically allocate struct video_device for the M2M devices, so embed it instead in driver's private data structure as it is done in case of fimc-capture and fimc-lite, where it solves some bugs on cleanup paths. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This fixes potential invalid pointer de-reference, when media_entity_cleanup() is called before video device is unregistered. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 8月, 2012 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The remaining drivers are mostly platform drivers. Name the dir to reflect it. It makes sense to latter break it into a few other dirs. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 7月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch adds locking for open(), close(), poll() and mmap() file operations in the driver as a follow up to the changes done in commit 5126f259 "v4l2-dev: add flag to have the core lock all file operations". Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 7月, 2012 2 次提交
-
-
由 Sakari Ailus 提交于
Change the users of V4L2_SUBDEV_SEL_TGT_* targets to use V4L2_SEL_TGT_* instead. The common definitions are moved to a new header file, include/linux/v4l2-common.h. Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This patch drops the _ACTIVE part from the selection target names as a prerequisite to unify the selection target names across the subdev and regular video node API. The meaning of V4L2_SEL_TGT_*_ACTIVE and V4L2_SUBDEV_SEL_TGT_*_ACTUAL selection targets is logically the same. Different names add to confusion where both APIs are used in a single driver or an application. For some system configurations different names may lead to interoperability issues. For backwards compatibility V4L2_SEL_TGT_CROP_ACTIVE and V4L2_SEL_TGT_COMPOSE_ACTIVE are defined as aliases to V4L2_SEL_TGT_CROP and V4L2_SEL_TGT_COMPOSE. These aliases will be removed after deprecation period, according to Documentation/feature-removal-schedule.txt. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 6月, 2012 6 次提交
-
-
由 Sachin Kamat 提交于
Stops the media entity pipeline which was started earlier if fimc_pipeline_validate fails. [s.nawrocki: reworked to not exceed 80 characters line length] Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sakari Ailus 提交于
Take into account media_entity_pipeline_start() may fail. [s.nawrocki: rebased onto latest tree] Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
The camera clocks managed by the driver were improperly reference counted and remained disabled when multiple video nodes were opened simultaneously. It manifested itself with following warning: [12.920000] WARNING: at drivers/media/video/s5p-fimc/fimc-mdevice.c:787 __fimc_md_set_camclk+0x1c0/0x1dc() [13.005000] Modules linked in: [13.005000] Backtrace: [13.040000] [<c0013084>] (dump_backtrace+0x0/0x10c) from [<c0454b70>] (dump_stack+0x18/0x1c) [13.070000] r7:00000009 r6:00000313 r5:c02d576c r4:00000000 [13.155000] [<c0454b58>] (dump_stack+0x0/0x1c) from [<c0022ec4>] (warn_slowpath_common+0x54/0x6c) [13.285000] [<c0022e70>] (warn_slowpath_common+0x0/0x6c) from [<c0022f00>] (warn_slowpath_null+0x24/0x2c) [13.360000] r9:e1981010 r8:00000000 r7:c061d3fc r6:e1981010 r5:e1981030 [13.430000] r4:00000000 [13.430000] [<c0022edc>] (warn_slowpath_null+0x0/0x2c) from [<c02d576c>] (__fimc_md_set_camclk+0x1c0/0x1dc) [13.550000] [<c02d55ac>] (__fimc_md_set_camclk+0x0/0x1dc) from [<c02d57b0>] (fimc_md_set_camclk+0x28/0x2c) [13.630000] [<c02d5788>] (fimc_md_set_camclk+0x0/0x2c) from [<c02d57e8>] (__fimc_pipeline_shutdown+0x34/0x50) [13.705000] [<c02d57b4>] (__fimc_pipeline_shutdown+0x0/0x50) from [<c02d5844>] (fimc_pipeline_shutdown+0x40/0x58) [13.765000] r5:e2391200 r4:e2357704 [13.805000] [<c02d5804>] (fimc_pipeline_shutdown+0x0/0x58) from [<c02d4754>] (fimc_capture_close+0xcc/0xe4) [13.915000] r5:e1b396c0 r4:e2357410 [13.915000] [<c02d4688>] (fimc_capture_close+0x0/0xe4) from [<c02b2d5c>] (v4l2_release+0x5c/0x80) [13.970000] r7:00000010 r6:e1d2d990 r5:e1b396c0 r4:e2394800 [14.000000] [<c02b2d00>] (v4l2_release+0x0/0x80) from [<c00b66cc>] (fput+0xc0/0x22c) [14.015000] r5:c157ef30 r4:e1b396c0 [14.015000] [<c00b660c>] (fput+0x0/0x22c) from [<c00b2ca0>] (filp_close+0x60/0x80) [14.080000] [<c00b2c40>] (filp_close+0x0/0x80) from [<c00b2d78>] (sys_close+0xb8/0xf4) [14.125000] r7:00000001 r6:e1b396c0 r5:c1400340 r4:c1400300 [14.125000] [<c00b2cc0>] (sys_close+0x0/0xf4) from [<c000f300>] (ret_fast_syscall+0x0/0x30) [14.205000] r7:00000006 r6:beee5b94 r5:00000003 r4:b6f64fac Fix this, as well as potential memory leaks due to not calling v4l2_fh_release() on some error paths. Also remove some error logs printed for events that aren't critical and are normal conditions for some system configurations. Also check if the device have been properly run-time enabled during video node open. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
The checks are already done at the v4l2 framework. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Allow memory buffer size to be increased by means of struct v4l2_pix_plane_format::sizeimage at VIDIOC_S_FMT ioctl. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
When video pipeline initialization fails, the ST_CAPT_BUSY flag needs to be cleared before pm_runtime_put_sync is called. Otherwise the runtime suspend routine tries to suspend device, rather than just turning it off. Also fix potential null pointer dereference in fimc_pipeline_shutdown(). Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 6月, 2012 1 次提交
-
-
由 Sachin Kamat 提交于
Fixes the following sparse warnings: drivers/media/video/s5p-fimc/fimc-lite-reg.c:218:6: warning: symbol 'flite_hw_set_out_order' was not declared. Should it be static? drivers/media/video/s5p-fimc/fimc-mdevice.c:183:5: warning: symbol '__fimc_pipeline_shutdown' was not declared. Should it be static? drivers/media/video/s5p-fimc/fimc-mdevice.c:1013:12: warning: symbol 'fimc_md_init' was not declared. Should it be static? drivers/media/video/s5p-fimc/fimc-mdevice.c:1024:13: warning: symbol 'fimc_md_exit' was not declared. Should it be static? drivers/media/video/s5p-fimc/fimc-core.c:466:5: warning: symbol 'fimc_set_color_effect' was not declared. Should it be static? drivers/media/video/s5p-fimc/fimc-capture.c:1163:5: warning: symbol 'enclosed_rectangle' was not declared. Should it be static? Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 5月, 2012 9 次提交
-
-
由 Sylwester Nawrocki 提交于
Replace deprecated crop operations with the selection API. Original crop ioctls are supported through a compatibility layer at the v4l2 core. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKuyngmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Add support for V4L2_CID_COLORFX control at the mem-to-mem and capture video nodes. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Tidy up the variant and driver data handling. Remove the 'samsung_' prefix from some data structures since it doesn't really carry any useful information and makes the names unnecessarily long. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Prefix the pixel format enumerations with FIMC_FMT_ to make it more clear, especially when used in new IP drivers, like fimc-lite, etc. Also add IO_ prefix in the input/output enumeration. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
There is getting more entities to manage within single video pipeline in newer SoCs. To simplify code put subdevs' pointer into an array rather than adding new member in struct fimc_pipeline for each subdev. This allows to easier handle subdev operations in proper order. Additionally walk graph in one direction only in fimc_pipeline_prepare() function to make sure we properly gather only media entities that below to single data pipeline. This avoids wrong initialization in case where, for example there are multiple active links from s5p-mipi-csis subdev output pad. struct fimc_pipeline declaration is moved to the driver's public header to allow other drivers to reuse the fimc-lite driver added in subsequent patches. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Simplify the register API and use FIMC_REG_ prefix for all register definitions for consistency with FIMC-LITE. The unused image effect defines are removed. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
In order to be able to select only FIMC-LITE support, which is added with subsequent patches, the regular FIMC support is now contained only in fimc-core.c, fimc-m2m.c and fimc-capture.c files. The graph and pipeline management is now solely handled in fimc-mdevice.[ch]. This means the FIMC driver can now be excluded with Kconfig option, leaving only FIMC-LITE and allowing this driver to be reused in SoCs that have only FIMC-LITE and no regular FIMC IP. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
Virtually no functional changes, just code reordering. This let us to clearly separate all logical functions available in the driver: fimc capture, mem-to-mem, and later fimc-lite capture, ISP features, etc. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 5月, 2012 2 次提交
-
-
由 Sylwester Nawrocki 提交于
When setting TRY crop on the sub-device the mutex was erroneously acquired rather than released on exit path. This bug is present in kernels starting from v3.2. Cc: stable@vger.kernel.org Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 5月, 2012 2 次提交
-
-
由 Sylwester Nawrocki 提交于
The commit 3b4c34aa "s5p-fimc: Add support for VIDIOC_PREPARE_BUF/CREATE_BUFS ioctls" added a handler for VIDIOC_CREATE_BUFS ioctl, but the queue_setup callback wasn't updated to properly interpret the pixel format. In this situation memory corruption may happen with VIDIOC_CREATE_BUFS ioctl. Update the queue_setup op to fix this. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
When setting TRY crop on the sub-device the mutex was erroneously acquired rather than released on exit path. This bug is present in kernels starting from v3.2. Cc: stable@vger.kernel.org Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 4月, 2012 2 次提交
-
-
由 Sylwester Nawrocki 提交于
Access to the memory-to-memory video node is serialized through a mutex so now there is no point in having per device context structure spinlock. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This patch prevents blocking on DQBUF at a video capture node in some conditions, after STREAOMOFF/STREAMON sequence. The ST_CAPT_SUSPEND flag should not be set during normal stream off, otherwise the capture engine is not properly enabled at stream on. Reported-by: NBernard Debbasch <b.debbasch@ssi.samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 3月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Add support for cropping and composition setup on the video capture node through VIDIOC_S/G_SELECTION ioctls. S/G_CROP, CROPCAP ioctls are still supported for applications since the core will translate them to *_selection handler calls. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-